Video Stabilization

Phantom Quadcopter with GoPro Mount

Samy's Camera — Thu, 28 Feb 2013 08:00:00 GMT

The DJI Innovations Phantom Quadcopter with GoPro Mount is a remote controlled, four-propeller quadcopter with a removable GoPro camera mount for capturing POV footage of flight. It is a compact and lightweight Phantom ready-to-fly right out of the box with the remote control unit and receiver up to 984.25 ft. (300m). The Phantom also features an intelligent Naza-M + GPS multi-rotor autopilot system, which supports two flight modes and a failsafe function that will automatically trigger the device to land safely when control is lost.

It can fly horizontal flight speeds of 10m/s, as well as vertical speeds of 6m/s. Plus, the included lithium-polymer battery supports up to 15 minutes of sustained flight time.

Features:

Streamlined Design: The portable, streamlined design reflects the aesthetics of its industrial design, while also allowing you to easily pack it into a backpack for transport.
Removable GoPro Camera Mount: Phantom has an external removable camera mount for you to mount a lightweight GoPro camera or other similar camera. It allows you to conveniently capture flight footage for exciting POV shots.
Ready-to-Fly Design: The hardware mounting and software tuning are all done before delivery so the Phantom is ready-to-fly the moment you unpack the package; just charge the lithium-polymer battery and install transmitter batteries and some accessories like propellers.
Includes Remote Control Unit: Phantom contains a remote controller and receiver, which help you avoid the inconvenience of purchasing such things. The only thing you need to do is to add TX batteries (4x AA dry cell). The 2.4 GHz (ISM) frequency makes the effective control distance up to 984.25' (300m) in ideal flight environments (it may be lower in certain flight environments). The frequency hopping anti-interference design allows multiple remote controllers to work at the same time, and provides a reliable remote communications link.
Stable Performance: Phantom has an integrated flight dynamics system, the Naza-M + GPS multi-rotor autopilot system, as well as a dedicated remote control unit and receiver. Flight parameters and functions have been set up before delivery and the proven stability of the Naza-M autopilot system allows you to easily achieve optimum flight performance.
Two Flight Control Modes: With the built-in Naza-M autopilot system plus a GPS module, the Phantom has GPS Altitude mode and Altitude Control Mode. Pilots can switch between the each mode to achieve a particular flight experience.
Intelligent Orientation Control (IOC): Phantom features Intelligent Orientation Control (IOC) using the Naza-M autopilot system. Usually, the forward direction of a flying multi-rotor system is the same as the nose direction. The Intelligent Orientation Control (IOC) supports two modes. In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor.
Failsafe Function & Naza-M Autopilot System: Phantom also has the failsafe function of the Naza-M autopilot system. This means when the communication between the remote controller and the transmitter is disconnected, the outputs of all command sticks from controller will go to the center position. If the GPS signal is good enough, the system will automatically trigger the Return To Home function for a safe landing.
Low Voltage Protection: Phantom offers two levels of low voltage protection, a function of the Naza-M autopilot system. It prevents your multi-rotor from crashing or other harmful consequences caused by low battery voltage. In the first level of protection, the LED indicator blinks red to warn you. In the second level protection the system will trigger the Phantom to land automatically.
Maximum Horizontal Flight Speed of 10m/s: The maximum horizontal flight speed of the Phantom can reach 10m/s and the maximum vertical speed is 6m/s. The perfect combination of speed and stability makes Phantom and excellent shooting accessory.
High-Intensity LED Indicators: Under each arm of the Phantom there are high intensity LED indicators that are used to help you see the Phantom's orientation during flight - even at night.
Battery Supports 10 to 15 Minutes of Flight Time: Phantom includes a 3S 2200mAh lithium-polymer battery that weighs just 6 oz. It also includes a balance charger. With the all-in-one design and light airframe, the battery supports flying times of 10 to 15 minutes, which will give you a more extensive flight experience and longer recording sessions.

$679.00

Scorpion EX Pro Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Cam Caddie Scorpion EX Pro Kit is a complete support system for HDSLR and small video cameras, and aids for convenient shooting, whether handheld or tripod-mounted. Consisting of the entire Scorpion line of products, the EX Pro Kit allows you to shoot with multiple accessories from microphones to video lights to external monitors.

The Scorpion EX makes the backbone of the support system, and its unique design allows you to mount varieties of cameras on it. Made from a lightweight composite material with polymer grip, the Scorpion EX provides a comfortable and solid platform, and offers stable support dampening jerky movements like a camera stabilizer or Jib arm. The shock dampening ability renders the Scorpion kit ideal for capturing action events such as skateboarding, snowboarding, sports, corporate events, weddings, walkthroughs, etc.

Included accessory shoes can hold accessories such as flash units, Lite panels, microphones, XLR Inputs and external recording devices. The shoes can be adjusted to maximize weight distribution, thus ensuring enhanced operability. Quick release attachment further eases setting up your complete support system. Accessory wings come as help when you want to mount multiple accessories on your Scorpion Ex Pro support system. Using the wings, you can easily and quickly mount Lite panels, microphones, monitors & lavaliere transponders. The accessory wings can be mounted to any 1/4-20 thread. A _-20 Flashner is also included which can fit into any industry standard flash shoe platform (hot/cold), and allows you to attach a variety of accessories directly to your camera.

The included cheese plate lets you mount the Scorpion EX directly onto a tripod, allowing you to easily switch between handheld shooting and tripod without needing any adjustments to your setup.

FEATURES:

Complete support system for HDSLR and small video cameras
Consists of the entire Scorpion line of products
Aids for convenient shooting, whether handheld or tripod-mounted
Mounts multiple accessories from microphones to video lights to external monitors
Scorpion EX makes the backbone of the support system
Scorpion EX's lightweight composite material construction with polymer grip provides a comfortable and solid platform
Dampens jerky movements like a camera stabilizer or Jib arm
Shock dampening ability renders the Scorpion kit ideal for capturing action events such as skateboarding, snowboarding, sports, corporate events, weddings, walkthroughs, etc
Accessory shoes can hold accessories such as flash units, Lite panels, microphones, XLR Inputs and external recording devices
Accessory shoes can be adjusted to maximize weight distribution, thus ensuring enhanced operability
Quick release attachment further eases setting up your complete support system
Accessory wings allow you to easily and quickly mount Lite panels, microphones, monitors & lavaliere transponders
Wings can be mounted to any 1/4-20 thread
_-20 Flashner can fit into any industry standard flash shoe platform (hot/cold), and allows you to attach a variety of accessories directly to your camera
Cheese plate lets you to mount the Scorpion EX directly onto a tripod, allowing you to easily switch between handheld shooting and tripod without needing any adjustments to your setup

$229.95

Prime 22 Camera Stabilizer Support System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Camtrol Prime 22 is a hand-held camera rig that allows you to capture ground level and overhead shots with large DV / DSLR cameras having free angle LCD displays and with combined camera/lenses weighing up to 7 lb (3.17 kg). It consists of an ergonomic grip, an adjustable stabilizing platform and a 5.25" (13.3 cm) vertical stabilizing bar.

While the centering channels allows you to find and adjust the camera's center of gravity for stable shooting, the Channeled Mounting Plate (CMP) enables secure attachment of cameras to the Camtrol Prime 22 and provides anti-slip / anti-vibration protection. In addition, the CMP has retractable legs that protect the mounted camera from impacts and scratches.

The CMP is attached to the camera with the help of a 1/4" mounting thumb screw. The 1/4" thread at the bottom of the thumb screw is compatible with quick release plates, monopods, or tripods, and allows the operator to easily switch between free shooting and static shots.

Quad pod retractable landing legs (QPRL) of the Camtrol Prime 22 allow you to customize the camera setup for different camera applications. Using the legs, you can configure the Camtrol Prime 22 to be used as a safe and stable editing and dubbing platform as well as a self imaging video trainer

Adjustable ball joints with locking mechanism and vertical stabilizer bar allows you to customize the Camtrol 22 for desired shooting conditions. By manually changing the configuration, you can capture ground level shots, overhead shots, and around-objects shots without even bending.

As you can operate the Camtrol Prime 22 rig with a single hand, you can conveniently operate the camera via a remote controller with the other hand. Thanks to a multi-faceted mechanism, the Camtrol Prime 22 also supports iPad and 2-camera operation.

You can attach the Camtroller and V-slope bracket to the action control grip via the Receiver Post for Remote and Accessories (RP/RA). Running the wires through the hollow grip, you can plug the wires into a LANC port or a digital L line. The RP/RA can also be used with an accessory shoe adapter to connect light panels and microphones.

A secure grip allows you to safely hold the camera and capture steady floating and dramatic moving shots. It works for both right and left handed operators. The Camtrol Prime 22 has a sturdy aluminum construction with an anodized finish. Measuring 10 x 6.375 x 2.5” (25.4 x 16.2 x 6.4 cm) in collapsed state and lightweight at 1.8 lb (0.816 kg), the Camtrol Prime 22 is highly portable and can be stored easily in an operator's photo bag.

$300.00

Uno Grip

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Need an extra grip for your Uno, Medusa or Proteus DSLR system? This grip can be mounted, and configured nearly anywhere on your rig. A single "Kip" handle allows you to toollessly adjust the grip in virtually any direction, angle or rotation. Hidden under the grip is a female 1/4" 20 thread just in case you need extra mount positions for your gear. Cinevate's Video University includes clips on the Uno, Medusa as well as Uno "grip bits" in case you'd like a visual overview of the systems. This product is made of CNC aluminum, composite, stainless steel and cast aluminum parts.

$156.45

Pegasus Table Dolly with 100mm Bowl Ball & Articulating Links

Samy's Camera — Tue, 13 Nov 2012 08:00:00 GMT

The Cinevate Pegasus Table Dolly with 100mm Bowl Ball & Articulating Links enables you to capture images while on the go and is used as an overhead tracking system. The articulating arms allow you to easily capture images in any direction, and the 100mm ball and 100mm bowl ensure smooth movement of the dolly. The Pegasus Table Dolly is a compact table dolly that features articulating links which allow for arc-shaped movements. Pegasus Table Dolly is easy to set up and can be broken down in a matter of seconds.

Features:

Enables you to capture images on the go (when attached to cameras weighing up to 10 lb (4.53kg)
Can be used as an overhead tracking system
Can be used as linear tracking system with the help of optional 15mm carbon rails
Articulating arms allow you to easily capture images in any direction
100mm ball and 100mm bowl - ensure smooth movement of the dolly

$904.61

Atlas 30 47" Slider with Regular Legs

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Cinevate Inc Atlas 30 47" Slider with Regular Legs is a linear tracking system that can bear a load up to 30 lb (13.61 kg). It is made from a single block of aluminum and is supported by 5/8

$1,300.00

26" Atlas FLT DSLR Slider W/ All Terrain Legs Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Cinevate's most compact, affordable and lightweight DSLR camera slider

$1,345.00

Atlas 10 35" DSLR Slider Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Atlas 10 is the perfect linear tracking system for photographers making the transition to capturing video on their HDSLRs. It is also the perfect solution for filmmakers needing a lightweight solution because it is lighter and faster to setup than most other LTS systems. Atlas 10 comes fully equipped with 7 tripod mount plate locations for production versatility, can support up to 10 lb and has special micro-adjust non-marking feet. Vertical operation can be achieved with the optional Vertical Pulley System and Counterbalance Weight. The Atlas 10 Complete Kit is compatible with most standard sized ball heads (3/8") and is the perfect linear tracking system for anyone capturing video on their HDSLRs.

FEATURES:

Tripod-based linear tracking system
Equipped with 7 tripod mount plates for production versatility
Includes micro-adjust non-marking feet
Designed to support loads up to 10 lb (4.5kg)
Allows vertical operation with the help of the vertical pulley system and counterbalance weight
Light-weight & quick setup
Compatible with standard 0.375" (9.75mm) sized ball heads
4 all-terrain legs provides a firm and stable base for capturing shake-free images

$1,474.00

Axis Jib

Samy's Camera — Wed, 16 Jan 2013 08:00:00 GMT

The unique (and patent-pending!) design of this jib contains all of the mechanical components inside of a single tube, giving it a sleek look while being incredibly easy to setup. The Axis features a 4 foot reach, a 7 foot vertical arc and effortlessly supports up to 50 lbs (22.7 kg). The Axis was designed and stress tested using 3D modeling software to ensure industry defying stiffness. You can also achieve repeatable pan and tilt movements when indexing the magnetic dry-erase marker rings located on each side of the jib...an industry first. Construction of this jib is 100% CNC machined 6061 aluminum, which is fully anodized in our typical flat black, non-reflective lifetime finish.

The Cinevate Axis Jib comes with a fixed 100mm half ball and will drop into 100mm bowl tripods. At the end of the jib is a 100mm bowl mount which will accept any 100mm video tripod head. The 100mm bowl at the jib head can be oriented in 3 positions to achieve low angle "ground scraping" shots. 75mm heads can be mounted as well using a 75mm-to-100mm bowl adapter.

The counterweight end features a 1" diameter handle to accept common size weights (not included). Provided is the 2.0 lb (0.9 kg) collared trim weight which securely slides along the jib for fine-tuning the balance. The recommended camera-to-counterweight ratio is 2:1.

Features:

4 foot arm, with 7ft vertical arc
Supports up to 50 lbs
Integrated 100mm bowl supports under-slung vertical and horizontal mounted heads
Locking pan and tilt
Removable magnetic marker for repeatable movements
Fully enclosed mechanical
Integrated trim weight
Silent operation

$2,299.00

Axis Jib

Samy's Camera — Thu, 13 Sep 2012 07:00:00 GMT

The unique design of Cinevate Axis Jib contains all of the mechanical components inside of a single tube, giving it a sleek look while being incredibly easy to setup. The Axis features a 4 foot reach, a 7 foot vertical arc and effortlessly supports up to 50 lbs (22.7 kg). The Axis was designed and stress tested using 3D modelling software to ensure industry defying stiffness. You can also achieve repeatable pan and tilt movements when indexing the magnetic dry-erase marker rings located on each side of the jib...an industry first. Construction of this jib is 100% CNC machined 6061 aluminum, which is fully anodized in our typical flat black, non-reflective lifetime finish.

The Axis Jib comes with a fixed 100mm half ball and will drop into 100mm bowl tripods. At the end of the jib is a 100mm bowl mount which will accept any 100mm video tripod head. The 100mm bowl at the jib head can be oriented in 3 positions to achieve low angle "ground scraping" shots. 75mm heads can be mounted as well using a 75mm-to-100mm bowl adapter.

The counterweight end features a 1" diameter handle to accept common size weights (not included). Provided is the 2.0 lb (0.9 kg) collared trim weight which securely slides along the jib for fine-tuning the balance. The recommended camera-to-counterweight ratio is 2:1.

Features:

4 foot arm, with 7ft vertical arc
Supports up to 50 lbs
Integrated 100mm bowl supports under-slung vertical and horizontal mounted heads
Locking pan and tilt
Removable magnetic marker for repeatable movements
Fully enclosed mechanical
Integrated trim weight

$2,299.00

Follow Focus Kit with D Gear (v4)

Samy's Camera — Tue, 01 Jan 2013 08:00:00 GMT

The New D Focus System Follow Focus Kit with D Gear (v4) is the next evolution in the affordable follow focus design from D|Focus Systems. We’ve made several changes that improve on the durability, reliability and aesthetics of the V3, while still maintaining the small footprint and affordable cost.

The V4 has the same, “open gearbox” design as the previous models, but is improved thanks to our new, custom manufactured “hybrid” gears. These gears offer the same damped, low backlash, smooth feel of the V3 but with the durability of metal gears!

We’ve also done away with the plastic rod mount found on the previous models in favor of an all CNC machined, single rod clamp, aluminum mount. This makes the new D|Focus V4 even smaller and more compact than the already small V3!

The New D|Focus V4 features our new, custom manufactured "hybrid" miter gears, plastic teeth molded onto aluminum insert. The advantage of plastic gears is that we can get a smooth, near backlash free action without the need for grease. This comes at a cost to durability though as plastic is obviously not as strong as metal. Metal gears offer the highest durability, but require grease for a smooth operation and that requires an enclosed gearbox, adding to the expense. You don't want to get grease all over your expensive lenses!

Features:

New custom manufactured hybrid gears - Plastic teeth molded over an aluminum hub gives the same smooth, damped, near zero backlash feel of the previous D|Focus with the durability of metal gears!
New, all aluminum, CNC machined, single rod clamp with gearbox angle adjustment
New removable marking disc
Compatible with industry standard 15 mm Rods
Compatible with all industry standard 32 pitch (0.8 mod) lens gears
Industry standard accessory port on the knob for whips and cranks
Reversible gearbox – Set it up on either side of your camera
End user serviceable and upgradeable design
Lightweight - Just 4.5 oz!
Compatible with practically all DSLR cameras, large sensor video cameras and 35mm adapter systems.
One year limited warranty.

$189.95

D/Mount V4 Bundle for Follow Focus and DSLR

Samy's Camera — Wed, 17 Apr 2013 07:00:00 GMT

Start taking professional grade videos without using a 15mm rail system! The NEW D/Focus Systems D/Mount V4 Bundle for Follow Focus is a lightweight mounting system for the NEW V4 Follow Focus or practically any single rod mounted follow focus. You can even attach a Zacuto Z-Finder frame. The V4 is far more robust and reliable than any of the previous versions and will lock down firmly and not come loose under normal use.

$239.95

Starter Bundle Plate / Rods / Follow Focus / and Gear

Samy's Camera — Sun, 11 Dec 2011 08:00:00 GMT

The the D Focus System Starter Bundle Plate Rods Follow Focus and Gear provides significant improvement in creating cinema quality images over a camera on a tripod alone. The addition of rods and a follow focus enables focus on moving subjects and rack focus between two or more areas in the scene.

$329.95

Field Runner Bundle Camera Support

Samy's Camera — Thu, 28 Jun 2012 07:00:00 GMT

The D/Focus Systems Field Runner Bundle Camera Support is a low-cost, light-weight, and highly ergonomic offset shoulder rig for DSLR shooters on a budget or on the go. Shooters who use the camera's LCD display with or without a viewfinder for monitoring prefer the Field Runner Bundle because it places the camera in front of the face. Equipped with the Jag35 Field Runner with 8-inch Rods, D|Focus, D|Crank, and a D|Gear, the Field Runner Bundle is ideal for traveling shooters who need a compact - yet full-featured - rig and shooters on a budget who need a rig today that can grow tomorrow.

Features:

Small, Compact, Offset Shoulder Rig
Includes 8" Rods
Includes Follow Focus, Gear, Crank
Compatible With 32 Pitch Lens Gears
Reversible Gearplate
Tension Adjustable Gearing
3D Marking Disc
Compatible With DSLR Cameras, Camcorders
D/Focus V3 - Tension adjustable gearing allows the user to customize how tightly the miter gears mesh. This allows for almost zero backlash. Compatible with all industry standard 32 pitch (0.8 mod) lens gears including the D|Focus | JAG35 D|Gears, Industry standard accessory port on the knob for whips and cranks, Single point of adjustment and tensioning onto your rail system, Reversible gearplate - Set it up on either side of your camera, End user serviceable and upgradeable design, New 3D Marking disc. Compatible with all DSLR cameras, video cameras and 35mm adapters
D/Gear - Industry standard 32 pitch (0.8 mod,) will work with any other standard follow focus, Large pitch diameter for more accurate focusing, Your choice of three methods for quick, secure lens mounting (Screw & nut, rubber band, zip tie), No need to measure your lens, all necessary length Legs are included!
D/Crank - The D|Crank is a standard speed crank for your D|Focus. Used for quick pulls from close focus to infinity or to help the operator with rack focus moves. Constructed of Delrin with a steel arm.

$559.95

Austin Rig Bundle Camera Support

Samy's Camera — Thu, 28 Jun 2012 07:00:00 GMT

The D/Focus Systems Austin Rig Bundle Camera Support is a compact, full-featured, offset shoulder rig that excels for the shooter who uses the rear screen on the camera for monitoring and who operates the follow focus themselves while shooting. The Austin Rig Bundle, equipped with the Jag35 Austin Rig with 8-inch rods, D|Focus, D|Crank, and a D|Gear, features JAG35's double-offset counter weight system that provides exceptional roll axis balance and stability.

Features:

Offset Shoulder Rig
Includes Follow Focus, Gear, Crank
Dual-Rail Shoulder Pad Assembly
Double-Offset Counterweight System
Tension Adjustable Gearing
Compatible With 32 Pitch Lens Gears
Reversible Gearplate
3D Marking Disc
Compatible With DSLR Cameras, Camcorders
D/Focus V3 - Tension adjustable gearing allows the user to customize how tightly the miter gears mesh. This allows for almost zero backlash. Compatible with all industry standard 32 pitch (0.8 mod) lens gears including the D|Focus | JAG35 D|Gears, Industry standard accessory port on the knob for whips and cranks, Single point of adjustment and tensioning onto your rail system, Reversible gearplate - Set it up on either side of your camera, End user serviceable and upgradeable design, New 3D Marking disc. Compatible with all DSLR cameras, video cameras and 35mm adapters
D/Gear - Industry standard 32 pitch (0.8 mod,) will work with any other standard follow focus, Large pitch diameter for more accurate focusing, Your choice of three methods for quick, secure lens mounting (Screw & nut, rubber band, zip tie), No need to measure your lens, all necessary length Legs are included!
D/Crank - The D|Crank is a standard speed crank for your D|Focus. Used for quick pulls from close focus to infinity or to help the operator with rack focus moves., Constructed of Delrin with a steel arm.

$779.95

DL-0920 Mirrorless Camera Grip

Samy's Camera — Tue, 30 Oct 2012 07:00:00 GMT

The Dot Line DL-0920 Mirrorless Camera Grip is perfect for small cameras that have a video function. It is all metal with a very fine crosscut texture to ensure a firm hold, weighs only 3.2 ounces. and measures only 2-1/2” high so I doesn’t over power small cameras and it easily fits into any bag, and yet, it allows the photographer to get under the camera providing better stability for those video shots. The bottom of the stabilizer grip has a 1/4-20 female thread allowing two or more stabilizer grips to be connected together.

Features:

Anodized Aluminum
Textured Grip for Secure Grasp
Rubber Mounting Pad
Small in Size and Weight
One Piece Construction
1/4"-20 Male and Female ends

$9.94

Video Stabilizer with Grip and Quick Release

Samy's Camera — Tue, 07 Feb 2012 08:00:00 GMT

The new Dot Line Video Stabilizer with Grip and Quick Release is complete and economical featuring a fully adjustable camera mount allowing viewing through the viewfinder or via the LCD screen with padded shoulder and chest supports as well a padded hand grip under the camera platform that is removable. The platform features a camera quick release plate allowing the photographer or videographer to quickly attach or remove the camera from the stabilizer. There is also a heavy duty, adjustable strap providing extra security and allowing hands-free shooting. Complete with storage pouch.

Features:

Padded chest and shoulder supports
Quick release camera plate
Padded hand grip
Adjustable strap
Storage pouch

$49.99

Pico Dolly

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The very affordable Pico Dolly gives a stable platform for smaller video productions. Made of aluminum and rollerblade type wheels with high quality ball bearings, the 3-1/2 inch wide dolly features three 1/4-20 female thread positions for mounting optional ball heads or articulating arms. This allows a camera (camcorder, point and shoot, NEX, Micro 4/3, or full size DSLR) as well as accessories to be mounted to the plate of the Pico Dolly. Adjustable wheels fron and rear. It glides straight or in circles while taking up minimal room allowing shots of up to 360

$69.99

Magic Rig V1 for HDSLR Cameras

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Dot Line Magic Rig V1 for HDSLR Cameras is a lightweight support rig for a DSLR camera or compact camcorder. With a height-adjustable baseplate and a quick-release plate with a 1/4"-20 stud, the Magic Rig V1 will accommodate most cameras.

Providing two points of contact for one-armed operation, the Magic Rig V1 is ideal for shooting video with small cameras. The operator's one hand holds the grip as the gunstock steadies the rig against the chest or bicep; meanwhile the other hand is free for adjusting zoom & focus, changing camera settings, and triggering recording. The result is steady video and comfortable operation over long periods of time.

The camera baseplate is offset from the hand grip and gunstock, so you can view your camera's LCD screen with a natural, forward-looking sight line. With thumbscrews throughout, you can adjust the positioning of just about any component so you can suit your specific camera, body type, and operating style.

In addition, the rig's rods are industry-standard 15mm size, which means the V1 is a modular rig that you can reconfigure endlessly, adding or substituting components to your heart's desire. The all-metal Magic Rig is durable yet lightweight at 1.6 lb.

FEATURES:

Baseplate features heavy-duty quick-release plate for camera
Supports any DSLR camera
Gunstock rod measures 12.5" long and features adjustment range of 10"

$99.00

Habbycam Snap Digital SLR Video Cage

Samy's Camera — Mon, 11 Jun 2012 07:00:00 GMT

Need a DSLR cage or 15mm rod supports but don't want to spend $400? The Habbycam Universal Rod System and Cage is the answer. A full featured accessories cage with industry standard 15mm rods for mounting your follow focus, matte box, audio gear and other accessories. The included cheese plate with 1/4-20 threaded holes makes mounting just about anything a snap! The entire system is made of lightweight, high strength composite materials and aircraft grade aluminum. The twelve inch long, 15mm rods are ceramic coated which makes them almost impossible to scratch.

This unique design is based on television / film industry standard specifications. The Habbycam Universal Rod System is compatible with all 15mm camera accessories on the market. The unique combination of design, materials and function make Habbycam Snap products the lowest cost available in the market.

$112.95

Komodo Video Dolly

Samy's Camera — Wed, 12 Dec 2012 08:00:00 GMT

The Dot Line Corp Komodo Video Dolly is designed for a slightly larger table video dolly than earlier. The new Komodo Dolly uses a very unique and original shifting base plate design that allows more compact tracking position and more areas to mount additional accessories such an LED light or remote LCD Monitor Display.

The Komodo Video Dolly can help to take popular Side-to-Side Tracking Shots, Cinematic Push / Pull Dolly Shots, or adjust the axles for unique and truly amazing 360 degree rotating shots.

The base plate is designed to mount a Ball Head, Video Head, or to be used with the Variable Friction Arms. It has the same high quality fluid roller bearings and wheel set as any of its kind with a matte Black Anodized Finish.

Features:

Great design for slightly larger table video dolly than the Pico Dolly.
It uses unique shifting baseplate design that allows a more compact tracking position and mount additional accessories.
It can be adjusted to provide Side-to-Side Tracking Shots, Cinematic Push/Pull Dolly Shots, or adjust the axles for unique 360 degree rotating shots.
The baseplate is designed with 1/4-20 female threads to mount a Ball Head, Video Head
Includes: Komodo Video Dolly & Heavy Duty Ball Head

$229.95

Follow Focus w/Ring

Samy's Camera — Wed, 12 Dec 2012 08:00:00 GMT

The New Dot Line Corp. Follow Focus w/Ring is the next evolution in the affordable follow focus design from D|Focus Systems. We've made several changes that improve on the durability, reliability and aesthetics of the V3, while still maintaining the small footprint and affordable cost.

The V4 has the same, "open gearbox" design as the previous models, but is improved thanks to our new, custom manufactured "hybrid" gears. These gears offer the same damped, low backlash, smooth feel of the V3 but with the durability of metal gears!

We've also done away with the plastic rod mount found on the previous models in favor of an all CNC machined, single rod clamp, aluminum mount. This makes the new D|Focus V4 even smaller and more compact than the already small V3!

The New D|Focus V4 features our new, custom manufactured "hybrid" miter gears, plastic teeth molded onto aluminum insert.

The advantage of plastic gears is that we can get a smooth, near backlash free action without the need for grease. This comes at a cost to durability though as plastic is obviously not as strong as metal. Metal gears offer the highest durability, but require grease for a smooth operation and that requires an enclosed gearbox, adding to the expense. You don't want to get grease all over your expensive lenses!

Features

New custom manufactured hybrid gears - Plastic teeth molded over an aluminum hub gives the same smooth, damped, near zero backlash feel of the previous D|Focus with the durability of metal gears!
New, all aluminum, CNC machined, single rod clamp with gearbox angle adjustment
New removable marking disc
Compatible with industry standard 15 mm Rods
Compatible with all industry standard 32 pitch (0.8 mod) lens gears
Industry standard accessory port on the knob for whips and cranks
Reversible gearbox - Set it up on either side of your camera
End user serviceable and upgradeable design
Lightweight - Just 4.5 oz!
Compatible with practically all DSLR cameras, large sensor video cameras and 35mm adapter systems.

$269.95

Stage Zero 6 ft. Ultimate Bundle

Samy's Camera — Thu, 29 Nov 2012 08:00:00 GMT

The Dynamic Perception Stage Zero 6 ft. Ultimate Bundle comes with everything you need for a 6-foot stage zero dolly and all of the accessories; 6 foot #1030 blue anodized aluminum rail, the MX2 Motion Controller, a pair of limit switches, a pair of legs, and all the extras you need for a fully-functional timelapse dolly. Just add a camera and a ballhead and you'll have everything you need to start shooting timelapse and video.

Features:

Intuitive and Simple Interface: Plug in information and the engine makes the right decisions for you Five simple buttons control all features.
Advanced Capabilities: The simplicity of the system does not prevent you from doing advanced operations, like tuning motors, tweaking camera settings down to the millisecond, and more.
Complete Camera Integration: Intervalometer, Exposure Control, Bulb or Camera-controlled, Post-Exposure Delays, Focus Line Control, Support for most major DSLRs Canon, Nikon, Pentax, etc.
Motion Control Modes: Continuous Motion, Smooth video-like motion from 0.12"/minute to 30.9"/minute, Shoot-Move-Shoot (Interleaved), Extended run time (up to days between moves) from 0.01" to 30.9" travel between shots, Manual Motor Control
Any Orientation: Horizontal, Vertical, Underslung
Open-Source: Open-Source Electronics and Software let you re-mix, explore, experiment, and modify to your heart's desire

$1,020.00

Hurricane 3D Camera Rig

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Genus Hurricane 3D Rig was designed from the outset to be a cost effective, entry level 3D Mirror rig. Mirror Rigs are the most versatile type of stereoscopic 3D camera rigs currently available. They can be used in an extremely broad range of 3D applications. However traditionally they have been very expensive devices only made in small volumes or to special order.

The Hurricane Rig, through clever design and large scale production will make high quality 3D accessible to video enthusiasts, owner operators and others that would have previously found the cost of a Mirror Rig prohibitive (a typical professional 3D mirror rig will cost in excess of $40,000USD). In order to keep costs down the rig does not feature the electronic controls often found on high end 3D rigs. Instead the rig has simple, easy to use manual control of camera alignment and camera adjustment. The use of manual controls makes the rig particularly well suited to educational users, training establishments and experimenters as they are simple to operate and easy to understand.

The Hurricane Rig adjusts to suit a broad range of cameras, from small consumer style camcorders through to video equipped DSLR's up to entry level professional video camcorders such as Sony's XDCAM EX product range. Typical camera pairs would be a pair of Canon XF105's, Canon 5D MKII's or Sony XDCAM EX3's. The maximum payload is 12 lbs. per camera.

Another advantage of the rigs simple design is that this helps keep the overall weight of the rig to a minimum. At just over 13 lbs for the rig plus between 6 - 13 lbs (typically) for the cameras, it can easily be used on low cost pro tripods. Most of the currently available professional 3D rigs weigh in excess of 10kg and when combined with broadcast cameras the total weight requires the use of expensive, high payload professional tripods that in many cases would cost more than the target price of the Hurricane Rig itself.

In summary, the Hurricane Rig will make high quality 3D affordable to entry level customers through the use of clever design combined with light weight construction. It's manual controls make it simple to use and particularly well suited to inexperienced users, experimenters and educational establishments.

Suggested Cameras:

2x Sony EX3's or Sony EX1 plus EX3 (at least one EX3 required for genlock)
Sony PMW-F3's
Canon XF105's
Canon XF305's
Canon XL H1's
SI 2K Mini's
Canon 5D MkII's (non-sync)
Canon 7D's (non-sync)
Sony HDC-P1's (may require rod extension kit)
Panasonic HC1500, HC1800 (may require rod extension kit)

$8,499.95

XR-1000 Handheld Camera Stabilizer - Open Box*

Samy's Camera — Sun, 14 Oct 2012 07:00:00 GMT

*IMPORTANT NOTICE: This product is Open Box and may have minor scratches or imperfections. It includes all necessary accessories, however may be missing some items found in the original packaging. It has been inspected, appears to be in good working condition, and comes with the full manufacturer's warranty. If you are at all unsatisfied with its condition, you may return it for a full refund or exchange.

The XR-1000 Handheld Camera Stabilizer amazingly advanced and re-designed XR-Series™ from Glidecam Industries brings versatility and affordability to the world of Hand-Held Camera Stabilization.

The lightweight and state-of-the-art Glidecam XR-1000, XR-2000 and XR-4000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage.

With the Glidecam XR-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake.

The Glidecam XR-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical.

Each XR-Series Stabilizer's offset, foam cushioned, Handle Grip is attached to a free floating, three axis Gimbal. This allows your hand to move up and down, and side-to-side, thereby isolating your hand's unwanted motions from the camera. This up and down movement alleviates the bouncing, pogo-type action often associated with our competitor's system because their handle cannot move up and down. This design feature, coupled with the overall higher inertia of the XR-Series systems, produces superior stabilization when compared with our competition.

A unique and proprietary, precision, three-axis Gimbal incorporates several adjustable, axis convergence controls. This allows all three axes to intersect for proper operational alignment.

The Camera Mounting Platform can be adjusted to move back and forth, and side to side, to quickly allow you to adjust the camera's horizontal balance.

By varying the amount of Counter Weight Disks on the Base Platform, or by changing the length of the no-tools telescoping Central Post, you adjust the camera's vertical balance.

Shot after shot, move after move, the Glidecam XR-Series Stabilizers deliver beautifully smooth and professional results. With the Glidecam XR-Series you no longer need a tripod or a dolly. All you need is your Imagination!

Features:

Dynamic Camera Balance Platform (Camera Mounting Platform)
Adjustable convergence, precision, three-axis Gimbal
No-tools Telescoping Center Post
Adjustable, inertial-control Base Platform
Foam padded Handle Grip
Precision Bearings at all vital points
Made with precision Aluminum
Anodized Studio Black
Laser etched Labeling
Allows unrestricted Booming and 360 degree Panning
Rubber feet under Base Platform

$269.00

Camcrane 200 Camera Crane

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Glidecam Camcrane 200 is a boom-arm, camera crane system designed to allow you to very smoothly boom your camera up and down, as well as move your camera around in an infinite number of 360-degree arcs. When balanced properly and used correctly, the Camcrane 200 will enable you to move your camera with such precision and fluidity that the results can only be called "picture perfect".

Camera cranes have been an industry standard for over 100 years. People have used cranes to move cameras to new heights both literally and figuratively, and now you can too.

The Camcrane 200 is the most affordable and versatile crane of its type on the market today. With its ease of set-up and variable boom lengths, you'll soon find yourself shooting the type of shots that you've always dreamed of. The Glidecam Camcrane 200 is best used when it is mounted onto a tripod, however it can be mounted onto any extremely strong, rigid surface of your liking.

$599.00

Side Mount

Samy's Camera — Thu, 15 Nov 2012 08:00:00 GMT

The GoPro Side Mount lets you attach your GoPro camera to the side of helmets, vehicles, gear and more. 3-way pivot adjustability makes aiming easy.

$12.99

Street Runner Conversion Kit

Samy's Camera — Tue, 04 Dec 2012 08:00:00 GMT

The Jag35 Street Runner Conversion Kit is the perfect solution for anyone desiring a lightweight, on the go support rig. It gives you the ability to Convert any of your existing Jag35 DSLR Kits into our popular Street Runner, providing you with three points of contact by having one hand on our handle, the chest pad on your chest and your focusing hand on the lens or Follow Focus. The entire rig is endlessly adjustable and can fit your unique needs.

$129.00

Glider Camera Rig For Follow Focus Control

Samy's Camera — Mon, 28 Jan 2013 08:00:00 GMT

When you need the simplest rig for your camera, look no further than the Jag35 Glider Camera Rig For Follow Focus Control. With its simple two handle design and sturdy base, the Glider gives you a perfect mount for adding a follow focus or a simple lighting configuration. The Glider was designed so that you can control your follow focus without having to let go of the handles. Also, the simple design is a great alternative to some the larger over the shoulder rigs, giving shooters more mobility and versatility to get those large sweeping shots. This Rig is perfect for vloggers, youtubers and amateur filmmakers that prefer a smaller, more maneuverable rig over some of the larger rigs. The Jag35 Glider is made from sturdy and lightweight aluminum, and adheres to the industry standard 15mmm rod system.

Features:

Dual-handle design
Ideal for adding follow focus
Compatible with standard 15mm rods
Constructed from lightweight aluminum

$349.99

KN2286 Nobert Sport Basic Camera Support Frame

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The K-Tek KN2286 Norbert Sport Basic is a camera support frame featuring machined aluminum top and bottom mounting plates with 2 carbon fiber, foam-covered side handles. Featuring adjustable height with proprietary collar/collet system, the side handles offer flexible and easy handling.

Multiple 1/4-20 and 3/8-16 threaded holes and 9 shoe mounts on the top bar allow you to attach many photo / video accessories such as lite panels, external monitors, microphones, etc. to the plate. A top handle comes with the Sport Basic frame and allows you to carry the complete frame with your camera system with single hand. The top handle is useful for low-angle shoots as well. You can use an Iris Rod Clamp System to attach the Norbert Sport Basic frame to the traditional 15 mm rail systems.

$242.10

SYMPLA Flexible Mattebox Complete Kit

Samy's Camera — Wed, 28 Mar 2012 07:00:00 GMT

The Manfrotto SYMPLA Flexible Mattebox Complete Kit is a fully customizable component rig system, but a limited number of pre-configured kits are also available to provide ''off-the-shelf'' answers to the most common requirements for HDSLR rigs. The multi-purpose Flexible Mattebox System is one of these kits, and its purpose is to improve the quality of the footage you capture by helping to control the light hitting your lens.

The Mattebox holds 2 x 4x4'' filters, while its angleable concertina hood protects the lens from stray light, while also permitting fast lens changes. The included Variable Plate component, with its vertical and lateral micro-adjusters, allows easy and precise alignment of the lens with the Flexible Mattebox. Compatible with all Manfrotto Video Heads. Kit comprises: 300 mm Rods, Sympla Flexible Mattebox, Sympla Variable Plate, Clips. We recommend: Lens Support, Remote Controls.

Features:

Universally compatible with lenses from wide to long
Can press up against a window to block out all reflections
Protects lens when open; packs flat when closed for transport
One of two filter holders rotates to let the other be angled correctly
Mounts and moves along two 15mm rods
Vertically adjusts 50mm to align with any lens
Slides aside on a 90° hinge to facilitate lens swaps

$999.99

Trafo Mini Video DSLR Rig

Samy's Camera — Wed, 05 Sep 2012 07:00:00 GMT

Enter the hot field of DSLR video and filmmaking. Record professional video using the Phottix Trafo Mini Video DSLR Rig. The Phottix Trafo DSLR Video Rig dual rail system and mounting brackets are constructed from heavy-duty aluminum and carbon fiber and ready for use under harsh conditions. It is customizable to quickly add or remove elements based on shooting conditions or projects. The Phottix Trafo system includes all the components you need to shoot better video. Whether you're starting out or a seasoned videographer the Phottix Trafo DSLR Video Rig is a cost-effective professional solution.

The Trafo Mini is a hand-held rig for use in close-quarters or on-the-go. It includes a rods, follow focus and handles. All the Trafo Mini components are packed in a padded metal carrying case.

The Trafo? Mini Set Includes:

Phottix Trafo Follow Focus System
Crossbar Adapter
Camera Mount and Plate
LCD Attachment Adapter
LCD Attachment Arm (Short)
Carbon Fiber-AL Rods 21cm x2
Carbon Fiber-AL Rods 27cm
Front Handles A x2
Carrying Case and Padded Inserts

$710.00

OM42 Rail Mounting Bracket for Omicron Ring Lights

Samy's Camera — Tue, 23 Oct 2012 07:00:00 GMT

The OM42 Rail Mounting Bracket for Omicron Ring Lights is a very useful and a good quality instrument from Quantum Instruments is an anodized aluminum L-type bracket made for Quantum Omicron 3 and Omicron 8 ring lights. It has a bottom 1/4"-20 knurled mounting knob, and two 15mm rail mounts, each with a tightening knob.

Features:

Compatibility - Quantum Instruments Omicron 3 and Omicron 8 ring lights, and any 15mm video rails.

$91.00

Ultra Port DSLR Bundle

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Redrock Micro Ultra Port has Two-grip Configuration which minimizes rotation while you shoot and it's easy to remove the camera from the rods with the DSLR Baseplate's quick release system. Shoot with just the camera, or shoot handheld with grips.

$470.50

Ultracage DSLR Event Bundle

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

Introducing the all-new Redrock Micro Ultracage DSLR Event Bundle, the essential accessory to get the most out of your Blackmagic Cinema Camera. It is a full-featured cage that adds no width to your camera. The Ultracage DSLR Event Bundle is available in many different configurations and rigs to fit your budget and shooting style and opens up the Blackmagic Cinema Camera to our full line of ultra- Series accessories for building your dream rig.

Its bold design has smooth, form-fitting lines that hug the camera and add no width while still delivering a full-featured cage. Look closely and you'll see a rock-solid mounting system that grips the camera 360 secure degrees for stability in your shots and accessories. Multiple mounting points and top and bottom rail options give you all the flexibility and options you need to attach your camera-top accessories and build the perfect rig.

$1,459.25

EyeSpy Deluxe with microFollowFocus

Samy's Camera — Tue, 17 Jan 2012 08:00:00 GMT

The eyeSpy line of DSLR rigs are ideal for any filmmaker who wants a shoulder-mounted ergonomic support system for their DSLR. The eyeSpy Deluxe Bundle builds on the Standard Bundle by adding the combined convenience of counterbalance weights for a perfectly balanced system, and a follow focus for pulling accurate focus.

Please Note the microFinder loupe accessory is for attaching 3" loupe securely to the back of the DSLR. Loupe is sold separately (currently we recommend the Hoodman Hoodloupe 3.0)

$1,584.00

UltraCage Cinema Bundle

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

The Redrock Micro UltraCage Cinema Bundle is a compact fixture to fix the shooting DSLR for friction free movement that produces ultra- quality image recordings. The cage accommodates your camera with all ease on access to controls.

Features:

Includes the ultraCage blue: all the advanced features in a form-fitting cage for your DSLR.
Industry-standard 15mm top and bottom rails: front rails support follow focus and mattebox; rear rails support external recorders, batteries, and other accessories. Top rails can also be extended over the lens for use with wireless follow focus motors or traditional follow focuses that can be top-rail mounted.
Double Top Handle: added support of two attached top handles for safe movement and a well balanced feel.
Powered Cage Support: attach the powerPack directly to the ultraCage for a complete power solution for all your camera-top devices, and as a bonus use your external battery as counterbalance.
BackPack Support: mounting plate kit for mounting camera-top accessories to the rear of the rig for improved balance. Cheeseplate includes taps for Anton Bauer, V-mount, and PAG battery plates.
Mount point: mounting point compatible with the Redrock Micro wireLock for robust HDMI cable handling and lock-down.
Convert to other rigs quickly and easily: reconfigure the system quickly and easily without tools for tripod, handheld or anything else you can imagine (some configurations may require additional accessories).
Shoe clamp: included shoe clamps fit the most popular DSLR cameras for rock solid two-point mounting.

$1,758.25

Ultra Field Cinema Bundle For DSLR

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

Introducing the all-new the Redrock Micro Ultra Field Cinema Bundle For DSLR, the essential accessory to get the most out of your Blackmagic Cinema Camera. It is a full-featured cage that adds no width to your camera. The Ultra Field Cinema Bundle is available in many different configurations and rigs to fit your budget and shooting style and opens up the Blackmagic Cinema Camera to our full line of ultra- Series accessories for building your dream rig.

Its bold design has smooth, form-fitting lines that hug the camera and add no width while still delivering a full-featured cage. Look closely and you'll see a rock-solid mounting system that grips the camera 360 secure degrees for stability in your shots and accessories. Multiple mounting points and top and bottom rail options give you all the flexibility and options you need to attach your camera-top accessories and build the perfect rig.

$1,854.75

AF-100 Studio Bundle for the Panasonic AG AF-100 Series

Samy's Camera — Wed, 11 Jan 2012 08:00:00 GMT

The Redrock Micro AF-100 Studio Bundle for the Panasonic AG AF-100 series cameras is the perfect set of cinema accessories for studio and tripod work using this fantastic camera from Panasonic. The Studio Bundle includes microMatteBox Deluxe Bundle delivers light and flare control in a full size cinema style mattebox, complete with flag, sidewings and swing-away arm. The microFollowFocus Blue enables precise and repeatable focus on your lenses. And the microSupport baseplate (low riser) with industry standard 12" 15mm carbon fiber rails provides the backbone on which the camera and accessories are attached.

This studio bundle is primarily designed for studio work or setups where tripod is the main support. If you are looking for something optimized for handheld, consider the microShoulderMount Deluxe Bundle (additional rod clamp is required). The microShoulderMount can also be attached to the bottom of this Studio Bundle to combine the best of both worlds.

$1,928.50

UltraCage EyeSpy For DSLR

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

Introducing the all-new Redrock Micro UltraCage EyeSpy For DSLR, the essential accessory to get the most out of your Blackmagic Cinema Camera. It is a full-featured cage that adds no width to your camera. The UltraCage EyeSpy For DSLR is available in many different configurations and rigs to fit your budget and shooting style and opens up the Blackmagic Cinema Camera to our full line of ultra- Series accessories for building your dream rig.

Its bold design has smooth, form-fitting lines that hug the camera and add no width while still delivering a full-featured cage. Look closely and you'll see a rock-solid mounting system that grips the camera 360 secure degrees for stability in your shots and accessories. Multiple mounting points and top and bottom rail options give you all the flexibility and options you need to attach your camera-top accessories and build the perfect rig.

$1,973.75

Studio Bundle for Sony FS-100 With microFollowFocus

Samy's Camera — Tue, 17 Jan 2012 08:00:00 GMT

The Redrock Micro Studio Bundle for Sony FS-100 digital cinema camera is the perfect set of cinema accessories for studio and tripod work using these compact new full 35mm frame digital video cameras. The Studio Bundle delivers solid support with the microSupport baseplate and Redrock 15mm iris rods, along with Redrock's most popular accessories:

The microMatteBox Deluxe Bundle delivers light and flare control in a full size cinema style mattebox, complete with flag, sidewings, and swing-away arm. The award-winning microFollowFocus enables precise and repeatable focus for your lenses.

Features:

Universal matte box: works with video cameras, 35mm lens adapters, and motion picture film cameras
Wide-screen format shade
Flattened shade design for wide angle lenses
Interchangeable mattes
Swing-away design--a first for this price range
Industry standard rod support: 15mm lightweight, or combination 19mm/15mm studio offset rod support arms (optional)
Separate locking knobs for filter position and filter rotation
Metal filter trays with spring-loaded filter locks
All filter stages rotate 360 degrees and support up to 5.65 In. square filter trays
Dual purpose filter tray for 4x4 In. and 4x5.65 In. filters. Additional tray options will be available to support up to 5.65 In. square filters
Unique stackable stage design: add or remove stages to exactly meet your configuration needs
All metal construction (lens shade and lens adapter high impact ABS)
Adaptable to various lens sizes (lens opening with lens connector: 140mm, without: 155mm)
Compatible with Arri filter trays and Arri bellows (with optional Arri bellows adapter)
Completely gear-driven design for slip-free, accurate, and repeatable focus movement
1:1 gear ratio allows smooth movements for still and motion picture 35mm lenses
Adjustable slide-mounting mechanism to fit large range of lens diameters, including video camera lenses
Interchangeable drive gears including 0.8 film pitch
Easily switchable to either side of camera
Optional microLensGears can be quickly attached to existing 35mm still (SLR) lenses for accurate gearing
Standard Arri-style accessory port in focus wheel for attaching whip, speed crank, etc.
Industry-standard 15mm lightweight (60mm spacing) rod mount (rod support not included with microFollowFocus bundle)
Constructed of high quality, machined aircraft-grade aluminum
Lightweight design
Sleek Redrock look

$1,977.50

Studio Bundle for the Sony F3 Series Cameras

Samy's Camera — Tue, 17 Jan 2012 08:00:00 GMT

The Redrock Micro's Studio Bundle for the Sony F3 Series Camera is the perfect set of cinema accessories for studio and tripod work using this fantastic new camera from Sony. The Studio Bundle includes some of Redrock's most popular products. The microMatteBox Deluxe Bundle delivers light and flare control in a full size cinema style mattebox, complete with flag, sidewings, and swing-away arm.

The microFollowFocus enables precise, repeatable focus with your cinema or still lenses. And the microSUpport baseplate (low riser) with ultra lightweight sturdy 15mm carbon fiber rails provides the backbone on which the camera and accessories are attached.

Features:

It is a complete set of cinema accessories for studio and tripod setups
The microMatteBox Deluxe Bundle delivers light and flare control in a full size cinema style
The microFollowFocus enables precise, repeatable focus with your cinema or still lenses
The microSupportbaseplate (low riser) with ultra lightweight and sturdy 0.59 In. (15mm) carbon fiber rails provides the backbone for the camera and accessories

$2,160.50

Field Cinema Bundle With lowBase for Tall Cameras

Samy's Camera — Tue, 25 Dec 2012 08:00:00 GMT

The Field Cinema Bundle with lowBase is a comprehensive rig designed to support the taller professional DSLRs in handheld style shooting.

The Field Cinema Bundle positions the camera body comfortably on top of the shoulder to optimize balance, while the microBalance counterbalance weights offer additional options for fine-tuning overall rig balance. The rubber microHandgrips are sweat-resistant and soft, providing comfortable grips for all-day shooting. Monitoring is accomplished by an external monitor ergonomically placed in front of the operator on the handlebars (and is fully adjustable with the included microMount with Spud).

The Field Cinema Bundle has 10 lift-and-lock thumbscrews to precisely tune the rig to your body and shooting style, and virtually every component is repositionable and adjustable. This edition of the Field Cinema rig includes the lowBase baseplate for the tall professional DSLR camera bodies such as the Canon 1D series, and Nikon D3S/ D4, as well as shorter camera bodies with optional battery grip (such as Canon 7D, 5D MKII/MKIII, Nikon D800/e, etc.)

The microBalance system features stackable weights to add or remove counterbalance weights as needed, and can also be fitted with an external battery plate such as those from Anton Bauer, Sony (V-mount), PAG and Switronix, among others.

The Field Cinema Bundle’s backbone is Redrock’s precision-milled industry standard 15mm carbon fiber rails: ultra- lightweight and incredibly strong. Maintain precise, repeatable focus control with the Redrock microFollowFocus. As with all Redrock branded rigs and accessories, this bundle is designed and made in the USA and carries a lifetime warranty.

Features:

Ideal for DSLRs that have the ability to output an HD picture to an external monitor while recording
Shoulder mount and bottom handgrips for steady handheld use
Includes microFollowFocus / Blue
microBalancePlus with 2x microBalance counterbalance weights
Convenient form factor and weight of video/film production system
Modular design: add only the pieces you want, and build as your needs grow
Rock solid, industry standard 15mm lightweight rods for stability and compatibility with other products

$2,204.00

Studio Bundle for the Sony F3 Series

Samy's Camera — Wed, 08 Feb 2012 08:00:00 GMT

The Redrock Micro's Studio Bundle for the Sony F3 series cameras is the perfect set of cinema accessories for studio and tripod work using this fantastic new camera from Sony. The Studio Bundle includes some of Redrock's most popular products. The microMatteBox Deluxe Bundle delivers light and flare control in a full size cinema style mattebox, complete with flag, sidewings, and swing-away arm.

The microFollowFocus enables precise, repeatable focus with your cinema or still lenses. And the microSUpport baseplate (low riser) with ultra lightweight sturdy 15mm carbon fiber rails provides the backbone on which the camera and accessories are attached.

Features:

microMatteBox Deluxe Bundle featuring a flag, side wings, and a swing-away arm delivers flare and light control
microSupport baseplate (low riser) with industry standard 12 In. 15 mm carbon fiber rails provides stability
microFollowFocus Blue - ensures a smooth, precise focus control

$2,360.50

Slide Cam Lite 800 (32 in.)

Samy's Camera — Wed, 26 Sep 2012 07:00:00 GMT

The Varavon Slide Cam Lite 800 (32 in.) Slide Cam Lite Track, Cine Dollies & Accessories Slide Cam Lite 800 30mm is wonderful railing for stylish shooting in various positions.

Features:

Roller bearing of the Slidecam LITE is small and light.
So, Adhesion of the roller and the shaft is low.
This is characteristic of a small roller.
When adjusting the tension (friction),
2~ 3kg weight must be raised on the rollers.

$329.00

Stealthy Camera Support

Samy's Camera — Wed, 24 Apr 2013 07:00:00 GMT

VariZoom announces the release of the Stealthy. The Stealthy gives you the ability to switch from mode to mode. Easily switch from tabletop tripod, 3-point shooter, camera stabilizer, short monopod, or long monopod (long pod sold separately). When not in use, comfortably hang the Stealthy from your belt with the included belt clip. Patented with other patents pending. Handles cameras as is up to 3 lbs., for cameras 3 - 5 lbs. order additional optional weight kit, the STEALTHY-WT5

The new Varizoom Stealthy Camera Support hangs from a belt clip and can be quickly drawn to capture images. With one simple move the Stealthy transforms into a lap monopod, with another move it becomes a fully functional gimbaled stabilizer for steady walking shots and simulated crane motions. With another quick adjustment it becomes a 3-point shooter allowing rock steady shots with full adjustments to fit nearly any user of DSLR and video cameras from 8 ounces up to several pounds. Camera weighing more than 3 lbs. will require additional optional weight STEALTHY-WT5 that allows you to balance Stealthy with cameras up to 5 lbs.

The Stealthy device also converts in seconds to a tabletop tripod, and the optional extended monopod goes to 6'. There will be a limited introductory offer where you can buy at a substantial discount. Please fill out your email notification below to take advantage of this offer. You will be notified on the first day that orders are shipping.

Features:

5 Support Modes
Aluminum Construction
Supports up to 3.0 lb
Supports 5.0 lb with Optional Weight Kit
Includes Belt Clip

$399.00

Bolt Action

Samy's Camera — Wed, 07 Mar 2012 08:00:00 GMT

The Bolt Action is Zacuto's simplest in-line dual handgrip shoulder mounted system for DSLRs. It utilizes our height-adjustable DSLR Baseplate with a set of 3.5” rods which allows you to mount any DSLR with or without battery grips. Your tripod plate can attach directly to the bottom of the DSLR Baseplate using the standard tripod screws, (2) ¼ 20” and (1) 3/8 16”. Turning the red knob on the baseplate allows you to quick release your camera right off of the rig. Our dual handgrip system, the Zgrips V3, makes your long shooting days a breeze. For even more added comfort for your hands, check out our Zgrip Gloves below. The shoulder pad and counterbalance weight make this rig balanced with less front heaviness and arm fatigue. You can use the Bolt Action on your right or left shoulder.

This rig is ideal for use with one of our EVFs since it is already in-line with your shoulder. Adding the Z-Finder EVF Pro with our EVF Standard Mount will put the EVF in perfect position with your eye. If you want to add a follow focus or matte box, all you need is a set of rod extensions. See our related products below for additional accessories you can add on to your Bolt Action!

$1,525.50

Z-DSP Scorpion Rig

Samy's Camera — Wed, 07 Mar 2012 08:00:00 GMT

The Scorpion rig is the ultimate solution to DSLR shoulder mounted shooting with an EVF. At the center of the Scorpion is our highly adjustable DSLR Baseplate, which allows you to mount any DSLR to the rig and mount your rig onto a tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4” 20 and (1) 3/8” 16. You can also easily quick release your camera from the rig by turning the red knob on the side of the baseplate and pulling up on your camera. This unique feature allows you to quickly switch between using the camera on its own or as part of your rig.

Our new curved form-fitting Akton Polymer shoulder pad connects to the back of the baseplate via two 2” M/F rods. The rods screw into the back of the DSLR baseplate and connect to the front of the shoulder pad via 15mm quick release ports, making the switch from shoulder mount to tripod use quick and easy. The Scorpion Shoulder Assembly also features an innovative ball joint built into the front of the shoulder pad. This allows the entire shoulder pad assembly to articulate in multiple directions so shooters can angle it to fit their body for individual comfort. This should be done with one hand while the kit is on your shoulder. The ball joint is released and secured by the red top lever.

The Scorpion can be used on your left or right shoulder. The Scorpion shoulder assembly also has a built in top handle for placing and removing it from your shoulder, low mode shooting and easy carrying. The handle can be positioned up or set down into the shoulder pad for storage with the turn of a Zacuto quick release lever.

The Scorpion kit is finished off with a 7lb Z-lite counterbalance and Zgrips V3 with 4.5” rods. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line with the camera and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using the included EVF mount.

$2,430.00

Cinema Camera Handles

Samy's Camera — Sun, 06 Jan 2013 08:00:00 GMT

Add optional handles for shooting in locations where you need to move around quickly with your camera. The Blackmagic Design Cinema Camera Handles let you steady your shot and keep up with the action! Blackmagic Cinema Camera Handles are machined from solid aluminum for strength, and feature solid rubber hand grips for maximum control.

$199.00

Scorpion Accessory Shoe

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Cam Caddie Scorpion Accessory Shoe is used to mount: microphones, led lights or any other device that you need for your next shoot. The unique design allows the Accessory Shoe to be used in a variety of different ways. It can be used individually to mount a microphone or LED light, or it can be combined with our Accessory Wing to mount multiple items. The unique design has a rotatable shoe plate to ensure that you can quickly switch setups and always configure your gear just the way you like.

$19.95

Accessory Wing

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Cam Caddie Accessory Wing can be used in a variety of different ways. It can be used individually or it can be combined with our Accessory Wing to mount multiple items to the Cam Caddie Scorpion. This unique design provides a great deal of flexibility ensuring you can quickly switch your gear around to fit your needs. The Accessory Wing is adjustable to maximize weight distribution and balance points. It includes 1/4-20 Tripod Mount so that it can be attached directly to a tripod or used in combination with our 1/4-20 Flashner.

Features:

10" (25.4cm) flat bar - is used with the accessory shoe to offer extra spacing on the camera support for mounting camera accessories
Can be mounted onto any 1/4-20 thread and a tripod top plate to attach multiple accessories
Compatible with accessories such as Lite Panels, Mics, Monitors & Lavaliere Transponders, etc
Can attach it directly to the camera via the Cam Caddie 1/4-20 Flash Shoe Adaptor

$24.95

Atlas 10 Moco: Motion Control Add-On Kit

Samy's Camera — Wed, 16 Jan 2013 08:00:00 GMT

Moco delivers complete motion control for Cinevate's revered line of camera sliders, infusing emotion into your story through timelapse, real time motion and stop motion - all with macro precision.

The Cinevate Atlas 10 Moco: Motion Control Add-On Kit comes with everything you need to equip your Atlas 10 Camera Slider for motorized slider operation. Shoot in real time with on-the-fly speed adjustment and dampening control or record and repeat moves for multiple takes and complex visual effects shots. Using Moco's intuitive controller, programming time lapse, real time motion and stop motion has never been easier.

With Moco you don't lose time swapping in and out a different motor for each motor function. The single servo motor handles all movements across all modes, while maintaining unparalleled precision. Moco boasts precision positioning to 0.1 mm.

Features:

Single high speed range servo motor maximizes creative options. Shoot from 1m in 3.7 seconds to 1m in 1 year without ever having to swap out the motor.
The Complete set of motion functions: real time filming, macro shots, speed matching, advanced timelapse operation or stop motion.
The precision servo motor delivers unmatched positioning precision (up to 0.1mm), which means you won't ever get a shaky slide, even when shooting in macro.
Concise and intuitive controls ensure quick and easy setup, saving you valuable time in the field.
Perfect repeat-ability means that you can achieve advanced match-moving and compositing shotsnecessary with sophisticated special effects.
Moco can handle high payloads even when mounted vertically or inverted (40 lbs).
Up to 40 hours of use per charge (under low payloads) and 12 hours of use per charge in mixed modes (real time, timelapse - under low/medium payloads).
Functions when center mounted on a tripod and when the slider is supported on its All Terrain Legs.
Thumb screw detachable belt for quick and easy conversion to manual slides.
All required cables with lock mechanisms to ensure a secure connection during use.
Precise 4-directional, 1-button joystick control
Speed dampening dial
Max speed dial
High resolution backlit LCD Display
Internal motor controller anti-overload protection w/ reset button on a chasis

$1,749.98

Pegasus Carbon Moco: Motion Control Add-On Kit

Samy's Camera — Wed, 16 Jan 2013 08:00:00 GMT

Moco delivers complete motion control for Cinevate's revered line of camera sliders, infusing emotion into your story through time lapse, real time motion and stop motion - all with macro precision.

The Cinevate Pegasus Carbon Moco: Motion Control Add-On Kit comes with everything you need to equip your Pegasus Carbon Camera Slider for motorized slider operation. Shoot in real time with on-the-fly speed adjustment and dampening control or record and repeat moves for multiple takes and complex visual effects shots. Using Moco's intuitive controller, programming time lapse, real time motion and stop motion has never been easier.

With Moco you don't lose time swapping in and out a different motor for each motor function. The single servo motor handles all movements across all modes, while maintaining unparalleled precision. Moco boasts precision positioning to 0.1 mm.

Features:

Single high speed range servo motor maximizes creative options. Shoot from 1m in 3.7 seconds to 1m in 1 year without ever having to swap out the motor.
The Complete set of motion functions: real time filming, macro shots, speed matching, advanced time lapse operation or stop motion.
The precision servo motor delivers unmatched positioning precision (up to 0.1mm), which means you won't ever get a shaky slide, even when shooting in macro.
Concise and intuitive controls ensure quick and easy setup, saving you valuable time in the field.
Perfect repeat-ability means that you can achieve advanced match-moving and compositing shots necessary with sophisticated special effects.
Moco can handle high payloads even when mounted vertically or inverted (40 lbs).
Up to 40 hours of use per charge (under low payloads) and 12 hours of use per charge in mixed modes (real time, time lapse - under low/medium payloads).
Functions when center mounted on a tripod and when the slider is supported on its All Terrain Legs.
Thumb screw detachable belt for quick and easy conversion to manual slides.

$1,774.98

Atlas FLT Moco: Motion Control Add-On Kit

Samy's Camera — Wed, 16 Jan 2013 08:00:00 GMT

Moco delivers complete motion control for Cinevate's revered line of camera sliders, infusing emotion into your story through timelapse, real time motion and stop motion - all with macro precision.

The Cinevate Atlas FLT Moco: Motion Control Add-On Kit comes with everything you need to equip your Atlas FLT Camera Slider for motorized slider operation. Shoot in real time with on-the-fly speed adjustment and dampening control or record and repeat moves for multiple takes and complex visual effects shots. Using Moco's intuitive controller, programming time lapse, real time motion and stop motion has never been easier.

With Moco you don't lose time swapping in and out a different motor for each motor function. The single servo motor handles all movements across all modes, while maintaining unparalleled precision. Moco boasts precision positioning to 0.1 mm.

Features:

Single high speed range servo motor maximizes creative options. Shoot from 1m in 3.7 seconds to 1m in 1 year without ever having to swap out the motor.
The Complete set of motion functions: real time filming, macro shots, speed matching, advanced timelapse operation or stop motion.
The precision servo motor delivers unmatched positioning precision (up to 0.1mm), which means you won't ever get a shaky slide, even when shooting in macro.
Concise and intuitive controls ensure quick and easy setup, saving you valuable time in the field.
Perfect repeat-ability means that you can achieve advanced match-moving and compositing shots necessary with sophisticated special effects.
Moco can handle high payloads even when mounted vertically or inverted (40 lbs).
Up to 40 hours of use per charge (under low payloads) and 12 hours of use per charge in mixed modes (real time, timelapse - under low/medium payloads).
Functions when center mounted on a tripod and when the slider is supported on its All Terrain Legs.
Thumb screw detachable belt for quick and easy conversion to manual slides.
All required cables with lock mechanisms to ensure a secure connection during use.
Precise 4-directional, 1-button joystick control
Speed dampening dial
Max speed dial
High resolution backlit LCD Display
Internal motor controller anti-overload protection w/ reset button on a chassis

$1,799.98

Atlas 200 Moco: Motion Control Add-On Kit

Samy's Camera — Wed, 16 Jan 2013 08:00:00 GMT

Moco delivers complete motion control for Cinevate's revered line of camera sliders, infusing emotion into your story through timelapse, real time motion and stop motion - all with macro precision.

The Cinevate Atlas 200 Moco: Motion Control Add-On Kit comes with everything you need to equip your Atlas 200 Camera Slider for motorized slider operation. Shoot in real time with on-the-fly speed adjustment and dampening control or record and repeat moves for multiple takes and complex visual effects shots. Using Moco's intuitive controller, programming time lapse, real time motion and stop motion has never been easier.

With Moco you don't lose time swapping in and out a different motor for each motor function. The single servo motor handles all movements across all modes, while maintaining unparalleled precision. Moco boasts precision positioning to 0.1 mm.

Features:

Single high speed range servo motor maximizes creative options. Shoot from 1m in 3.7 seconds to 1m in 1 year without ever having to swap out the motor.
The Complete set of motion functions: real time filming, macro shots, speed matching, advanced timelapse operation or stop motion.
The precision servo motor delivers unmatched positioning precision (up to 0.1mm), which means you won't ever get a shaky slide, even when shooting in macro.
Concise and intuitive controls ensure quick and easy setup, saving you valuable time in the field.
Perfect repeat-ability means that you can achieve advanced match-moving and compositing shots necessary with sophisticated special effects.
Moco can handle high payloads even when mounted vertically or inverted (40 lbs).
Up to 40 hours of use per charge (under low payloads) and 12 hours of use per charge in mixed modes (real time, timelapse - under low/medium payloads).
Functions when center mounted on a tripod and when the slider is supported on its All Terrain Legs.
Thumb screw detachable belt for quick and easy conversion to manual slides.
All required cables with lock mechanisms to ensure a secure connection during use.
Precise 4-directional, 1-button joystick control
Speed dampening dial
Max speed dial
High resolution backlit LCD Display
Internal motor controller anti-overload protection w/ reset button on a chassis

$1,949.98

Atlas 30 Moco: Motion Control Add-On Kit

Samy's Camera — Wed, 16 Jan 2013 08:00:00 GMT

Moco delivers complete motion control for Cinevate's revered line of camera sliders, infusing emotion into your story through time lapse, real time motion and stop motion - all with macro precision.

The Cinevate Atlas 30 Moco: Motion Control Add-On Kit comes with everything you need to equip your Atlas 30 Camera Slider for motorized slider operation. Shoot in real time with on-the-fly speed adjustment and dampening control or record and repeat moves for multiple takes and complex visual effects shots. Using Moco's intuitive controller, programming time lapse, real time motion and stop motion has never been easier.

With Moco you don't lose time swapping in and out a different motor for each motor function. The single servo motor handles all movements across all modes, while maintaining unparalleled precision. Moco boasts precision positioning to 0.1 mm.

Features:

Single high speed range servo motor maximizes creative options. Shoot from 1m in 3.7 seconds to 1m in 1 year without every having to swap out the motor.
The Complete set of motion functions: real time filming, macro shots, speed matching, advanced time lapse operation or stop motion.
The precision servo motor delivers unmatched positioning precision (up to 0.1mm), which means you won't ever get a shaky slide, even when shooting in macro.
Concise and intuitive controls ensure quick and easy setup, saving you valuable time in the field.
Perfect repeat-ability means that you can achieve advanced match-moving and compositing shots necessary with sophisticated special effects.
Moco can handle high payloads even when mounted vertically or inverted (40 lbs).
Up to 40 hours of use per charge (under low payloads) and 12 hours of use per charge in mixed modes (real time, time lapse - under low/medium payloads).
Functions when center mounted on a tripod and when the slider is supported on its All Terrain Legs.
Thumb screw detachable belt for quick and easy conversion to manual slides.
All required cables with lock mechanisms to ensure a secure connection during use.
Precise 4-directional, 1-button joystick control
Speed dampening dial
Max speed dial
High resolution backlit LCD Display
Internal motor controller anti-overload protection w/ reset button on a chassis

$1,949.98

FlareDinkum Compact

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

The digital SLR revolution requires a professional solution to lens flares. The Dinkum FlareDinkum Compact is a professional lens shade designed to offer precision glare protection for hot-shoe equipped camcorders and DSLR cameras, with the added advantage of offering some lens protection from dust and drizzle. The durable 10-link, 7.5” inch long ball-and-socket arm holds securely on every angle and the shade is made of sturdy anti-reflective aluminum. Fast set-up and ease of use make this an essential item to add to the kit of every serious photographer or videographer.

*PLEASE NOTE: the required rigidity of the arm means that while this device is length adjustable, exact alignment of the separated pieces and significant pressure is required to reattach the segments.

$35.95

FlareDinkum Pro (Screw Mount)

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

Designed to accommodate the move from larger film cameras to mid-size camera bodies and matteboxes, the PRO lens shade has been stopping lens flare and offering weather protection to lenses in the field for nearly a decade. For shooters who prefer a fixed mounting solution, the Dinkum FlareDinkum Pro (Screw Mount) attaches to the ¼-20”" receptacle on the handle of your shoulder-mount camera, giving a more secure base than the quick mounting clamp on the original PRO flag. Used on shoots in some of the most remote and harsh environments on the planet, the tough, anti-reflective aluminum shade helps keep your front element free of sun, dust and drizzle. The ultra-flexible 13-link ball-and-socket arm is length adjustable and designed to pack easily into most equipment cases. The arm is length-adjustable and does not require tools to change the length - simply pop the segments apart and press them back together to customize your flag, or make it do double duty with one of our alternate heads or mounting bases. The tough, anti-reflective aluminum shade measures 10"” x 6.5"” and is beveled at the rear.

$58.45

FlareDinkum CINE (Screw Mount)

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

As the first product invented and the granddaddy of our range, the CINE lens shade has been battling stray light on movie sets and TV studios for more than twelve years. Initially designed for use on larger film and video cameras, the Dinkum FlareDinkum CINE (Screw Mount) sets the standard for lens shades in the U.S. production market. The CINE Screw Mount attaches to the threaded receptacle on your accessories block, camera handle or mini-Cardellini clamp, giving secure attachment to all standard ¼-20"” attachment points. The ultra-flexible 15-link, 20” inch long ball and socket arm is length-adjustable and does not require tools to change the length. Simply pop the segments apart and press them back together to customize your flag, or make it do double duty with one of our alternate heads or mounting bases. Topped with the classic square shaped, 11.5"” x 7.75"” rugged anti-reflective aluminum shade.

$62.95

FlareDinkum Pro

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

Designed to accommodate the move from larger film cameras to mid-size camera bodies and matteboxes, the Dinkum FlareDinkum Pro lens shade has been stopping lens flare and offering weather protection to lenses in the field for nearly a decade. With our newly engineered and improved super strong clamp, this versatile French Flag attaches quickly to any professional film or video camera and stays firmly in place. Used on shoots in some of the most remote and harsh environments on the planet, the tough, anti-reflective aluminum shade helps keep your front element free of sun, dust and drizzle. The ultra-flexible 13-link ball-and-socket arm is designed to pack easily into most equipment cases. The arm is length-adjustable and does not require tools to change the length - simply pop the segments apart and press them back together to customize your flag, or make it do double duty with one of our alternate heads or mounting bases. The tough, anti-reflective aluminum shade measures 10"” x 6.5"” and is beveled at the rear.

$76.45

FlareDinkum CINE

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

As the first product invented and the granddaddy of our range, the Dinkum FlareDinkum CINE lens shade (previously known as the clamping French Flag) has been battling stray light on movie sets and TV studios for more than twelve years. Initially designed for use on larger film and video cameras, the CINE is also popular as a versatile cutter with grips, gaffers and stage technicians. Setting the standard for lens shades in the U.S production market, the strong spring clamp can be fixed to multiple points on camera bodies while also securing easily to C-Stands or other surfaces up to 1.5” inches thick. The FlareDinkum CINE attaches quickly to your camera set-up without the need to remove matteboxes or change rod settings, allowing for placement in areas other shades can'’t reach. The ultra-flexible 15-link, 20” inch long ball and socket arm is length-adjustable and does not require tools to change the length. Simply pop the segments apart and press them back together to customize your flag, or make it do double duty with one of our alternate heads or mounting bases. Topped with the classic square shaped, 11.5” x 7.75” rugged anti-reflective aluminum shade.

$80.95

FlareDinkum Pro (Fixed Base Mount)

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

Designed to accommodate the move from larger film cameras to mid-size camera bodies and matteboxes, the PRO lens shade has been stopping lens flare and offering weather protection to lenses in the field for nearly a decade. For shooters who prefer a mount with a horizontal profile, the Dinkum FlareDinkum Pro (Fixed Base Mount) attaches to the handle of professional cameras and provides a low profile with uninterrupted handgrip. Keep the Fixed Base Mount on your camera’s handle at all times and snap the flag off at the base of the arm when not needed. Used on shoots in some of the most remote and harsh environments on the planet, the tough, anti-reflective aluminum shade helps keep your front element free of sun, dust and drizzle. The ultra-flexible 13-link ball-and-socket arm is length adjustable and designed to pack easily into most equipment cases. The arm is length-adjustable and does not require tools to change the length - simply pop the segments apart and press them back together to customize your flag, or make it do double duty with one of our alternate heads or mounting bases. The tough, anti-reflective aluminum shade measures 10”" x 6.5"” and is beveled at the rear.

$94.45

FlareDinkum CINE (Fixed Base Mount)

Samy's Camera — Thu, 25 Oct 2012 07:00:00 GMT

As the first product invented and the granddaddy of our range, the CINE lens shade has been battling stray light on movie sets and TV studios for more than twelve years. Initially designed for use on larger film and video cameras, the Dinkum FlareDinkum CINE (Fixed Base Mount) sets the standard for lens shades in the U.S. production market. This Fixed Base Mount version is ideal for shooters who prefer a mounting solution with a horizontal profile. The Fixed Base Mount attachment tightens on to the handle of professional cameras and provides a low profile with uninterrupted handgrip. Keep the Fixed Base Mount on your camera’s handle at all times and snap it off at the arm when the flag is not needed. The ultra-flexible 15-link, 20” inch long ball and socket arm is length-adjustable and does not require tools to change the length. Simply pop the segments apart and press them back together to customize your flag, or make it do double duty with one of our alternate heads or mounting bases. Topped with the classic square shaped, 11.5"” x 7.75"” rugged anti-reflective aluminum shade.

$98.95

Gearbox 2 with 15mm Rods And Mount

Samy's Camera — Wed, 12 Dec 2012 08:00:00 GMT

The Dot Line Corp. Gearbox 2 with 15mm Rods And Mount is designed to facilitate modern shooter to mount today’s growing number of accessories on the video camera. It can accommodate full size Canon 5D Mark II inside the cage without extension adapters. It can also support the Canon DSLR plus a Quick Release Adapter, or larger camera bodies. The top black anodized metal bracket carries 1/4-20 threaded holes and ¼ In. pass through holes for mounting a variety of hot shoe adapters, mini ball heads, or P&C Friction Arms. Two rubber coated handles allow comfortable hand held operation and are spread apart to stabilize hand-held shooting styles. The GearBox is portable, modular and lightweight. The new GearBox Rod Adapter includes two 15mm rails and attaches under the GearBox, the flat base under the Rod Adapter still allows use of a Tripod Mount to attach the GearBox + Rod Adapter to a video Fluid head.

Features:

The new GearBox can support a full size Canon 5D Mark II inside of the cage without using the included extension adapters.
With the extension adapters installed, the GearBox can support the Canon DSLR plus a Quick Release Adapter, or larger camera bodies.
metal bottom bracket has 1/4-20 threaded mounts available underneath to attach a quick release plate
The top black anodized metal bracket carries 1/4-20 threaded holes and ¼ In. pass through holes for mounting a variety of hot shoe adapters, mini ball heads, or P&C Friction Arms.

$195.00

Hurricane Hood and Plate Kit with dual baffles for Canon XF-105 series Camcorders

Samy's Camera — Thu, 26 Jul 2012 07:00:00 GMT

The Genus GHHPK/XF105 Hurricane Hood and Plate Kit with dual baffles for Canon XF-105 series Camcorders is a larger hood designed to accommodate lenses with a front diameter of up to 145mm as well as the Canon XF105. This hood incorporates mounting holes for a 1.4 wave retarder or depolariser to help reduce or eliminate polarisation effects common on mirror rigs.

$749.99

Hurricane Hood and Plate Kit

Samy's Camera — Thu, 19 Jul 2012 07:00:00 GMT

The Genus GHHPK Hurricane Hood and Plate Kit with dual baffles is a larger hood designed to accommodate lenses with a front diameter.

$749.99

Suction Cup Mount V2

Samy's Camera — Thu, 15 Nov 2012 08:00:00 GMT

Attach your GoPro camera with the GoPro Suction Cup Mount V2 to cars, boats, motorcycles and more. Included short extension arm allows for ultra-compact mounting. Engineered for broad range of motion and stability. Proven at speeds of 150+ mph.

Note: For maximum holding strength, attach to a clean surface.

$29.99

Custom Finder Plate for Video Capture

Samy's Camera — Wed, 01 May 2013 07:00:00 GMT

The Hoodman Custom Finder Plate for Video Capture provides adjustable mounting solution for virtually any DSLR with a 3 inch LCD screen. The kit includes an HCP Base Plate, an H3.0 Adapter for 3 inch LCDs, and a hex tool for horizontal and vertical adjustments.

The HCP base plate features anti-twist bars, a hand strap slot, and a camera sling strap attachment point. It is constructed in the USA from milled black anodized aluminum. The base plate features a camera mounting screw and dual 1/4-20 tripod sockets. Connected to it is an upright column that attaches to the H32 HoodLoupe for 3.2 inches displays or the H-LPP3 HoodLoupe 3.0 for 3 inches displays. The on-board hex tool enables horizontal and vertical adjustments. The horizontal quick-release bar attached to the upright column that supports the loupe can be easily moved in and out using the brass knob, allowing you to attach or remove the loupe from the assembly.

Features:

CustomFinder Base Plate
Dual 1/4-20 Tripod Sockets
Black Anodized Aluminum Construction
Made in the USA
H3.0 Adapter for 3 inches LCD Screens
Hex Tool Included

$99.99

8' Aluminum Rods (Anodized Black)

Samy's Camera — Tue, 27 Dec 2011 08:00:00 GMT

Our Jag35 rods are made out of solid aluminum.We looked at many different rods and try to find one that’s affordable and well made and couldn’t really find one that was both, so we decided to start machining our own. These are solid aluminum and anodized black. They are great and most importantly very affordable.

$49.99

Balanced Top Handle

Samy's Camera — Sun, 12 Feb 2012 08:00:00 GMT

The Balanced Top Handle is designed to give you more adjustment allowing the user to achieve a better balanced rig. It consist of a 8″rod with a rodclamp at the end and a regular height adjustable handle on the other end. Made in the USA using black Anodized Aluminum parts.

$99.99

VideoMic Accessory Bracket

Samy's Camera — Mon, 04 Feb 2013 08:00:00 GMT

The VideoMic Accessory Bracket is a very useful and a good quality product by its manufacturer juicedLink. Mounting points for lots of accessories. Fabricated from solid aluminum bar stock. See more photos in the Photo Gallery.This bracket mounts to the 3/8-16 threaded hole at the bottom rear of the Rode VideoMic, and provides for numerous points for mounting accessories.

Features:

Multiple points allow mounting of camera accessories
Attaches to 3/8-16 thread at the bottom rear of the Rode VideoMic
Rubber pad for secure attachment
Requires a 3/16" hex key
Uses 1/4-20 x 3/8 socket set screws and rubber pads for mounting accessories
CNC milled from solid aluminum bar stock
Black anodized body finish
Made in USA

$36.00

4-Way Macro Focusing Rail Slider for DSLR Cameras

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Phottix 4-Way Macro Focusing Rail Slider for DSLR Cameras is for use with all digital and film SLR cameras and is compatible with most Nikon, Minolta and Pentax macro and EOS bellows, macro shot extension tubes, or macro lenses such as the Canon FD and FL .Smooth rack and pinion movement provides extremely fine focusing adjustments.

The rail has a geared drive system which greatly enhances accuracy and speed of adjustment of the rail. Two 6" rails allow movement in four directions, right, left, forward and backward. Mounts on, and accepts 1/4x20 threaded screws, will fit most tripods and copy stands. Positive locking knobs assure rock-steady focus

Focusing rails are essential accessories for macro photography, which requires precise distance modifications and a steady hand, as well as other situations where accurate camera positioning is crucial.

$69.95

8" Handlebar Rod

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 8" Handlebar Rod from Redrock Micro adds a 15mm 8" rod to the Handlebar Clamp. It features an anti-rotation locking mechanism and attaches with a standard hex screw.

$25.00

WireLock for UltraCage DSLR & UltraBase DSLR

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

The Redrock Micro UltraBase DSLR Support Plate accessory protects and converts your video DSLR's HDMI output jack to ensure a solid, reliable video connection. wireLock fastens to either the ultraCage DSLR or ultraBase DSLR and attaches to your DSLR's mini HDMI port. The outside wireLock port is a full size HDMI cable which is stabilized by the wireLock's solid machined aluminum housing. The result protects your camera's mini HDMI port, converts the connection to a more robust full sized HDMI, and ensures a reliable, lasting HDMI connection to your external monitor or video recorder.

$35.00

Micro Lens Gear Size D

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

MicroLensGear size D 0.8 film pitch mod 32 provides film-pitch gearing for 35mm still lenses. The A gear fits lens focus rings with a circumference of 280mm-320mm. Comes with large and small fastening screw sizes. Size D is often used for gearing video camera lenses, such as the Panasonic AG-HVX200 video camera.

$44.50

Micro Lens Gear Size B

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

MicroLensGear size B 0.8 film pitch mod 32 provides film-pitch gearing for 35mm still lenses. The A gear fits lens focus rings with a circumference of 211mm-250mm. Comes with large and small fastening screw sizes.

$44.50

Micro Lens Gear Size C

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

MicroLensGear size C 0.8 film pitch mod 32 provides film-pitch gearing for 35mm still lenses. The A gear fits lens focus rings with a circumference of 241mm-280mm. Comes with large and small fastening screw sizes.

$44.50

1.5" Micro Arm Short (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1.5" Micro Arm Short (Black) from Redrock Micro is an adjustable articulating arm for attaching and positioning accessories onto your camera rig. The microArm has 1/4" 20 male screws on each end. The complete articulating knob tightens with a single knob. Finished in anodized metal. Short arms are 1.5" (3" full length).

$49.00

15mm Stainless Rods 4"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Professional grade, lightweight stainless steel precision machined. Two 4" rods, industry standard 15mm diameter. This length is ideal for applications including a 15mm lightweight rod support for hybrid 19mm-15mm rod configurations. Rods are designed to fit the microRodSupport Base Plate.

$64.00

15mm Carbon Fiber Rods 4"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

All new design and manufacturing process, the Redrock carbon fiber rods are precision crafted 15mm support rods. Carbon fiber rods are 66% less weight than stainless steel and incredibly rigid.

$64.00

4" Micro Arm Long (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The microArm is an adjustable articulating arm for attaching and positioning accessories onto your camera rig. The microArm has 1/4" 20 male screws on each end. The complete articulating knob tightens with a single knob. Finished in anodized metal. Long arms are 4" (8" full length).

$64.50

Micro Support Baseplate High Riser Upgrade

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

MicroSupport baseplate high riser upgrade converts the microSupport baseplate low riser to the microSupport baseplate high riser.

$65.00

microMount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The microMount is a flexible connector from Redrock Micro that allows just about any item to be connected to 15mm rods. The microMount includes a _" 20 female and male mounts to easily accommodate connections with on-board monitors, noga arms, and other accessories. microMounts can also be used to configure entirely new camera support configurations by connecting additional rods and other microMounts.

$67.50

Micro Whip 12"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Comparable in build and quality to Chrosziel whips. Standard arri size also works with other follow focus units.

$69.50

Micro Support Cheeseplate

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The microSupport cheeseplate delivers a mounting plate with a variety of 3/8" and 1/4" mounting holes. The microPlate cheeseplate can also be used as an upgrade to older microPod and microPowerPod. In additon to the mounting holes, the cheeseplate has mounting hole patterns for v-mount and Anton Bauer battery plates. The microSupport cheeseplate is also often paired with the rod clamp to attach to 15mm rods.

$80.00

15mm Stainless Steel Rods 12"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Professional grade, lightweight stainless steel precision machined. Two 12" rods, industry standard 15mm diameter. Rods are designed to fit the microRodSupport Base Plate.

$89.00

15mm Carbon Fiber Rods 12"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

All new design and manufacturing process, the Redrock Micro carbon fiber rods are precision crafted 15mm support rods. Carbon fiber rods are 66% less weight than stainless steel and incredibly rigid.

$89.00

15mm Stainless Rods 18"

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Professional grade, lightweight stainless steel precision machined. Two 18" rods, industry standard 15mm diameter. Rods are designed to fit the microRodSupport Base Plate.

$99.00

Micro Lens Support

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Redrock microLensSupport attatches to the Redrock microRodSupport system(or any industry-standard 15mm rod system) and provides support for larger 35mm lenses. A vertical riser adjustment enables fitting to each lens for the best possible support. Examples of lenses that can benefit from the microLensSupport are nikon 80-200 f2.8 zoom, 300mm f2.8 zoom, 70-200f2.8 zoom, and other larger, longer focal length fixed or zoom lenses.

$128.50

microOmniMount

Samy's Camera — Mon, 27 Feb 2012 08:00:00 GMT

The MicroOmni Mount is a very useful adapter clamp by its manufacturer Redrock Micro. It enables different rod systems to be intergrated together. The Microomni Mount provides connectors for 15mm lightweight (60mm center to center), 15mm offset studio and 19mm rods.

Features:

Aircraft-grade machined aluminum
Mounting holes for 19mm (104mm spacing), 15mm studio offset (100mm spacing) and 15mm lightweight (60mm spacing)
Combination thumb/wrench screws for clamp tightening

$157.50

MicroOmniMount

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

The Redrock Micro microOmniMount enables different rod systems to be integrated together.It provides connectors for 15mm lightweight (60mm center to center), 15mm offset studio, and 19mm rods.

Features:

Aircraft-grade machined aluminum
Mounting holes for 19mm (104mm spacing), 15mm studio offset (100mm spacing) and 15mm lightweight (60mm spacing)
Combination thumb/wrench screws for clamp tightening

$157.50

DSLR Baseplate

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The DSLR Baseplate provides the foundation for support setups around video and still digital SLRs. This baseplate is lightweight, very low profile, and can be used to connect standard 15mm rods (60mm spacing) to the bottom of any DSLR.

FEATURES:

Quick release rod locking system (Patent Pending) for fast attachment and removal.
Locking pin for nikon and canon cameras to prevent rotation.
Rubber padded platform.
Professional-grade machined aluminum construction.
Made in America.

$174.50

DSLR Tripod Platform

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The DSLR Tripod Platform provides an easy and convenient way to attach handheld DSLR rigs including Captain Stubling and UltraPort to a tripod. This unique approach allows you to quickly attach to a tripod for lockoff or pan and tilt shooting, and allows you to "leave the weight behind" when going handheld. The shim kit provided enables you to adjust the height of the rod clamp for rigs with parts below the rods.

$184.00

Micro Riser

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The microRiser is an adjustable rod offset that enables you to attach a second set rods in front of the camera to raise the rods higher. This allows front-of-camera accessories such as a follow focus or mattebox to be used with video DSLRs with battery grip or other under-camera accessory. Rod support is 15mm/ 60mm spacing.

$224.50

Sony FS700 Top Mount Accessory Plate

Samy's Camera — Wed, 02 Jan 2013 08:00:00 GMT

The Redrock Micro Sony FS700 Top Mount Accessory Plate is used to attach any accessory you wanted to on top of your FS-700. The plate has tapped holes in both the Berkey System standard and in RED standard spacing to use any standard 15 mm accessories or any of RED accessories to customize your FS-700 for your shooting style.

Installation is quite easy, just remove the factory top handle, place our plate on top and fasten with the three provided fasteners no need to remove the factory cold shoe or the lens hook.

$229.00

microBalance QR Vertical Mounting Kit

Samy's Camera — Tue, 29 Jan 2013 08:00:00 GMT

The Redrock Micro microBalance QR Vertical Mounting Kit enables microBalance QR counterbalance weights to be attached to 15mm rails in a vertical position for 4-axis rig balancing.

This mounting adapter attaches to industry standard 15mm rails (60mm spacing) and directly attaches the microBalance QR weights using the included thumbscrew. The entire assembly can be moved forwards or backwards on the rails for front-back balance adjustment, or thumbscrew can be loosened and the weights moved within the mounting adapter for left-right adjustment.

The result is a perfectly balanced rig that minimizes fatigue and maximizes shot stability.

Please Note This Adapter is designed for use only with the microBalance QR counterbalance weights.

$244.50

UltraBase DSLR Support Plate

Samy's Camera — Thu, 15 Nov 2012 08:00:00 GMT

The Redrock Micro UltraBase DSLR Support Plate is the ultimate in support for your video-capable DSLR camera. This is a baseplate-only version of the ultraCage DSLR that gives you the same professional-level support, but without the cage. The ultraBase delivers unparalleled support and stability so your DSLR can be used as a professional-level cinema camera.

Like the ultraCage, the ultraBase gives your HDSLR a cinema-style baseplate for adding 15mm iris rods, the backbone for attaching accessories such as mattebox and follow focus. The ultraBase’s ergonomic design hugs the camera body but still provides access to the bottom battery door and features/buttons of your DSLR. The optional wireLock reinforces the HDMI connection with a solid locking mechanism, and converts the mini HDMI connection into a more secure full size HDMI.

$299.00

microFollowFocus Blue Extension

Samy's Camera — Wed, 29 Feb 2012 08:00:00 GMT

The Redrock Micro microFollowFocus Blue Extension studio option is an add-on accessory to convert your single-sided microFollowFocus blue into a two-sided follow focus. Adding the second side delivers added convenience and speed that minimizes setup time.

With the second side attached, both sides have the innovative hard stops, illuminated marking disk, and machined accessory port. hard stops can be set independently on either side. In addition, pulling focus from the second side does not change the lens rotation direction so "correct cinema direction" is maintained.

The studio option has enough room to fit a swing-away mattebox, so you have the convenience and power using all your cinema equipment together. The second side can also be easily added or removed to switch between single- and double-sided operation.

The Redrock microFollowFocus blue is the first professional grade follow focus to offer a removable second sided follow focus option at an affordable price. This is a great, economical solution for independent production, owner/operators, and anyone wanting to own high quality gear at an exeptional price.

Please note: illuminated marking disk requires optional flares, which are purchased separately. The studio option is an optional accessory to the microFollowFocus | blue follow focus.

Features:

Add-on accessory to convert single-sided microFollowFocus / blue into a two-sided follow focus
Makes room for a swing-away mattebox, enabling you to use all your cinema equipment together
Second side can be swiftly added or removed to switch between single- and double-sided operations
Pulling focus from the second side does not alter the lens rotation direction, so correct cinema direction is maintained
Once attached to the microFollowFocus / blue, both sides have hard stops, illuminated marking disk, and machined accessory port

$397.00

Micro Ultracage Blue DSLR

Samy's Camera — Wed, 12 Sep 2012 07:00:00 GMT

The Redrock Micro Ultracage Blue DSLR gives your HDSLR a cinema-style baseplate for adding 15mm iris rods, the backbone for attaching accessories such as mattebox and follow focus. The ultraCage ergonomic design hugs the camera body but still provides access to the bottom battery door and features/buttons of your DSLR. The optional wireLock reinforces the HDMI connection with a solid locking mechanism, and converts the mini HDMI connection into a more secure full size HDMI.

$745.00

MicroFollowFocus / Blue 19mm Bundle

Samy's Camera — Sun, 29 Jan 2012 08:00:00 GMT

The MicroFollowFocus / Blue 19mm Bundle is a very useful product by its manufacturer Redrock Micro. This bundle is designed for cameras with 19mm rods for example the Red ONE, ensures smooth and precise focus control. It’s a combination of the microFollowFocus / Blue and the 19mm clamp.

Features:

Offers accurate and repeatable focus movement
Features the microFollowFocus / Blue and the 19 mm clamp
Clamp can be removed and used with the microFollowFocus in a 15 mm lightweight support rod (60 mm rod spacing)

$822.50

MicroFollowFocus 19mm Adapter Clamp

Samy's Camera — Mon, 30 Jan 2012 08:00:00 GMT

The Redrock's MicroFollowFocus 19mm Adapter Clamp for the microFollowFocus v2 allows the microFollowFocus version 2 to be used on 19mm rods, such as those found on the Red digital cinema cameras and the Red ONE. The adapter clamp is a quick release system (Patent Pending) for easy on/off attachment, and has a new lightweight design matched to the microFollowFocus.

The 19mm adapter clamp works only with the Redrock microFollowFocus version 2 and is also available in a bundle with the microFollowFocus version 2.

Features:

Compatible w/RED Support Rods
Quick Release

$1,022.50

Captain Stubling DSLR Bundle with microFollowFocus

Samy's Camera — Tue, 17 Jan 2012 08:00:00 GMT

We don't really have the authority to hand out military ranks, but we're making an exception. Like Captains of other things (ships, space ships, industry), this rig goes where others wouldn't dare, and leads by example. The Stubling gets its name from its designer, DV Rebel and VFX guru Stu Maschwitz and the functionality of the design reflects Stu's philosophy on shooting - put the camera everywhere, stay light, and do it all yourself.

$1,147.00

microFollowFocus - Blue (Studio)

Samy's Camera — Mon, 12 Mar 2012 07:00:00 GMT

The Redrock Micro microFollowFocus - Blue (Studio) is a new generation of follow focus units that lead the way in price/performance. The Blue line incorporates new designs and technologies to deliver an incredibly solid, accurate, highly repeatable follow focus ideal for any level of production. The microFollowFocus Blue can be used with still lenses (with proper gearing such as our microLensGears) and cinema lenses.

Performance is the most critical aspect of any follow focus unit. At the heart of the microFollowFocus Blue is a Redrock custom designed and manufactured gearbox that produces exceptionally smooth, backlash-free focus pulls. Unique adjustments for backlash and drag allow you to dial in exactly the feel and performance you want.

The microFollowFocus Blue incorporates the best of the award-winning innovations from the microFollowFocus v2, including the original Redrock 3D marking disk, convenient quick release clamp, and large precision-machined focus wheel. Building on this solid foundation, the microFollowFocus Blue adds a refined slim design, adjustable hard stops, reinforced moveable focus indicator, flippable gearbox, all-metal machined accessory port, and a unique illuminated marking disk (when used with optional Flares).

The microFollowFocus Blue comes in two configurations: A single-sided version and a double-sided (studio) version. The only follow focus that allows you to add a second wheel on the opposite side which speeds up repositioning. You can switch between single or double-sided setups, or add the second wheel option at any time.

Features:

0.8 film pitch drive gear, with options for Fujinon and Canon drive gears
Allows precise focusing of still and cinema lenses
Includes a backlash dial and a second focus wheel for enhanced focusing of lenses
Integrated hard stops with easy begin/end setups enable fast repeatable racking between two focus points, thus achieving perfect focus on lenses without hard stops - can be used with Canon and Nikon lenses
A moveable focus indicator allows you to pull focus from any place on the camera while maintaining view of focus indicator and focus wheel
3D marking disk - allows you to view your focus marks from many angles
You can use the marking disc in low-light conditions using an optional flare, which offers a glow and illuminates the marking disc
Custom-designed gears and gearbox offer slack-free performance
Flippable gearbox - adjusts the drive gear front and rear and is compatible with lenses of any size
Industry-standard, all-metal machined accessory port - you can add focus whip or speed crank to the focusing system
Kung Fu rubberized handgrip - prevents hand-slips and ensures stable shooting
Aluminum construction
Made in America

$1,190.00

Stealthy Accessory Weight Kit for Camera

Samy's Camera — Wed, 24 Apr 2013 07:00:00 GMT

The Varizoom Stealthy Accessory Weight Kit for Camera contains weights ranging from 3lbs to 5 lbs. It is best ready source to provide balanced stability for professional shooting. The weights are made with high quality steel for extra strength.

$25.00

Gorilla Plate Adapter

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Zacuto's Gorilla Plate Adapter centers the Gorilla Plate's offset tripod holes by screwing into the bottom of the plate and providing a set of aligned holes. This is necessary when the Gorilla Plate and Z-Finder are mounted to another manufacturer's baseplate. Without the adapter, the camera won't be centered and the lens will not line up with a matte box or follow focus.

$16.63

Zgrip Glove (1 Glove)

Samy's Camera — Sun, 23 Sep 2012 07:00:00 GMT

The Zacuto Zgrip Glove is the perfect accessory to any of our Zgrip Handles. Non-slip textured FDA Grade High Temp Silicone glove slides onto our Zgrip Handle giving additional padding for long shoots. They are easy to take on and off. This item includes 1 glove only.

Features:

Slides Onto Any Zgrip Handle for Comfort
Made of FDA-Grade High-Temp Silicone

$23.28

7" Rod Extensions

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Zacuto 7" Rod Extensions (2 rods included). Using the RedRock M2 you will need one set of 7" rod extensions if using the HVX200 and 2 sets of 7" rod extensions if using the Canon XL-H1. Our rods are all lightweight; 15mm diameter with 60mm spacing and clear anodizing. They are made out of 6061 aluminum and the threads are ½” 13.

$66.50

7 in. (177.80mm) Male / Female Rod Set (Black)

Samy's Camera — Wed, 20 Jun 2012 07:00:00 GMT

The 7" (177.80mm) Male / Female Rod Set; 2 rods included. Male on one end, female on the other. These rods are lightweight; 15mm diameter with 60mm spacing and black anodizing. They are made out of 6061 aluminum and the threads are ½” 13.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

Features:

Diameter: 0.59" (15 mm)
No. of Threads: 1/2" 13
Material: 6061 aluminum
Length: 7" (177.80 mm)
Weight: 8 oz (227 g)

$66.50

12" Rod Set Female Threaded

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

12 Inch Rods, Female Threaded on both ends. 1 set comes included with all Zacuto Universal Baseplates Our rods are all lightweight; 15mm diameter with 60mm spacing and clear anodizing. They are made out of 6061 aluminum and the threads are ½” 13.

$80.75

Z-Focus Extender

Samy's Camera — Mon, 29 Oct 2012 07:00:00 GMT

The Zacuto Z-Focus Extender is used to extend the distance between the focus knob and gear housing on any Zacuto Z-Focus. Moving the focus knob away from the rods is essential for compact rig setups with multiple accessories. The Z-Focus Extender is 4.5 In. long. The added distance provides clearance between an EVF and focus knob, making it much easier for the focus puller or camera operator to control the knob and see focus marks. This accessory can potentially shorten your overall rig length by three inches, moving the rig center of gravity closer to the user’s shoulder. Installation is easy.

If you purchased your Z-Focus before January 2010 or if your Z-Focus gear has a hole in the middle instead of a metal pin, please contact Zacuto as you will need a different screw to mount the extender properly.

Features:

Creates Space Between Focus Knob / Gear
4.5 In. Long

$90.25

Z-Mount II

Samy's Camera — Thu, 07 Feb 2013 08:00:00 GMT

The Zacuto Z-Mount II connects two 15mm rods set at a right angle. Each rod port is controlled separately by a Zacuto Z-release ratcheting lever. The Z-Mount II can also accept a Zacuto Zamerican Arm end. This piece is perfect for attaching an articulating arm to your baseplate, handles or anywhere else on a 15mm rod system.

Other uses include creating a right angle shoulder pad to camera offset as in our Fast Draw kit. Attaching a single handle to a baseplate like in our Z-Grip Z-Mount or making a quick lens support as displayed in the detailed product photos with a short rod and a 1/4 20 or 3/8 16 adapter. The Z-Mount II has so many useful applications and is a great a la carte piece to keep in your camera bag for emergencies!

Our 15mm/19mm version of this is called a Zandy (Named after product designer and Sales VP Mandy Rogers!). Our 19mm/19mm version of this is called a Ztudio.

Features:

For 15mm Rods

$95.00

Cable Pincher

Samy's Camera — Tue, 12 Feb 2013 08:00:00 GMT

Introducing the Zacuto Cable Pincher-Zacuto's brand new solution to HDMI video cable support. Did you know that a video camera's HDMI port can cost over $1000 to repair if it gets damaged? The Zacuto Pincher is a new product developed to help avoid damaging your HDMI cables or HDMI camera ports. The Pincher safely secures your HDMI cable to your DSLR camera, keeping it out of the way and protected from any potentially damaging obstacles in your surrounding environment. The Pincher also keeps your HDMI cable from coming unplugged and losing its signal on the EVF, an all too common problem with DSLR shooting today.

The Pincher was designed to easily attach to a Zacuto DSLR Baseplate or Gorilla Plate with two Allen screws. Once attached, the HDMI cable is held into place with a fully-adjustable rotating clamp or "dog." Other HDMI cables may work with the Pincher, but we strongly recommend using the Zacuto HDMI Cable for optimal use. This device can be mounted on the new Zacuto EVF Gorilla Plate Bracket and will function with all leading DSLR cameras, including the Canon 5D, 7D, T2i, Nikon D7000, D5100, D3100, D3, Panasonic GH2 and many more.

Features:

Cable restraint to securely hold the Zacuto HDMI cable used with DSLR cameras
Mounting bar of the pincher attaches to the Gorilla Plate or DSLR Baseplate by using 2 Allen screws
Adjustable either horizontally or vertically
Has been tested on Canon T2i, Canon 60D, Canon 5D, Canon 7D, Canon 1D, Lumix GH2, Nikon D3100, Nikon D7000 and, Nikon D3s
Works when using battery grips with the Canon 5D,7D, and T2i
Can be configured differently depending on your camera

$123.50

Gorilla Baseplate for C100/300/500, Scarlet and Epic Cameras

Samy's Camera — Wed, 01 May 2013 07:00:00 GMT

The Gorilla Baseplate for the Canon C100/300/500, Scarlet and Epic Cameras from Zacuto is a simpler, lighter version of our Studio Baseplate. It attaches to the camera with 3/8” 16 and ¼” 20 screws*. The Gorilla Baseplate features 15mm diameter, 60mm spaced threaded rod holes in the front of the base plate that allow users to mount a follow focus, lens support or other accessories in front of the camera. The Gorilla Baseplate is not compatible for matte box use unless you have a height adjustable matte box**.

The Gorilla Baseplate also features our rod port system on the side of the plate which allows you to mount an EVF or other accessories from the side. The Gorilla Baseplate is great for building simple run’n’gun type set ups like the Target Shooter, Striker, and Recoil. It can also be used for a simple tripod set-up. The Gorilla Baseplate does not come with rods. Rods can be purchased separately.

* NOTE: The screw hole pattern on the Gorilla Baseplate is ¼” 20, ¼” 20, 3/8” 16, 3/8” 16. The first ¼” 20 and 3/8”16 screw holes are for mounting the C300/100/500. The last ¼” 20 and 3/8”16 screw holes are for mounting the Epic or Scarlet. The plate will ship with one ¼” 20 screw and one 3/8” 16 screw.

** NOTE: The Gorilla Baseplate has a non-standard rod to lens height, only some adjustable matte boxes will work. The standard is 85mm. The lens of the Epic/Scarlet to center of 15mm rods on the Gorilla Baseplate is 106mm. The lens of the C300 to center of 15mm rods is 88mm. All lightweight spaced, rod-mounted follow focuses should be compatible.

Features:

Designed for Canon EOS C300, Red Scarlet and Red Epic Cameras
0.59" (15 mm) diameter and 2.36" (60 mm) spaced threaded rod holes in the front of the baseplate allows you to mount a follow focus, lens support or other accessories in front of the camera
Features rod port system on the side of the plate allows you to mount an EVF or other accessories
Great for building simple run and gun type set ups like the C300 Target Shooter, C300 Striker and Recoil
It can also be used for a simple tripod set-up

$156.75

C300 Grip Handle Relocator

Samy's Camera — Mon, 29 Oct 2012 07:00:00 GMT

The Zacuto C300 Grip Handle Relocator puts all important controls of your camera right at your fingertips! The Canon 300/100* removable grip attaches directly to our Grip Relocator handle and our exclusive cable connects to the port on your camera. Once its plugged in, users have trigger or on/off control, lens aperture control, and a programmable function button that can be set to a number of things including waveform, 1 to 1 zoom, zebras, my menu, and many more. The cable is 24 In. long.

The Grip Relocator attaches to any Zacuto Zgrip handle. Our Zgrips come in single and double handed options of varying lengths and include a ball joint for articulation. This is the perfect product if you already own our Zgrips and want an effective solution for your C300/100/500. Simply un-screw the 6 screws on your Zgrip handle, take of the handle and screw on the Grip Relocator with the 6 screws. The Zacuto Grip Relocator is particularly effective in our Recoil kit which sets the camera far back on your shoulder for comfort and balance.

If you don't already own any Zacuto Zgrips and are interested in a single handgrip option check out Zgrip Handle with Grip Relocator. If you are interested in a double handgrip option, look at Zgrips V3 with Grip Relocator.

* The Grip Relocator can also be used with the C500. However, the C500 camera does not come with the Canon Grip. You must purchase that separately.

Features:

Lets You Use C300 Grip with a Zgrip
Repositions C300 Grip to up to 2 ft Away
Fully Articulating Until Locked by Lever

$356.25

Micro Finder Loupe Accessory Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The MicroFinder Loupe Accessory Kit allows a standard 3rd party loupe to be securely fastened to the rear of a video DSLR with 3" LCD without any modification, glue, or sticking velcro, or any other substances that may potentialy damage or discolor your camera. The microFinder loupe accessory is currently certified to work with the Hoodman Hoodloupe 3.0

$39.50

Fluid Monopod with 500 Series Head

Samy's Camera — Sun, 21 Apr 2013 07:00:00 GMT

The Manfrotto Fluid Monopod with 500 Series Head has an innovative fluid pan cartridge incorporated into the base that gives you an incredibly smooth panning action. Great compactness while folded thanks to the three retractable feet.

The patented fluid monopod features wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The fluid monopod ensures smooth shots and fine control with up to 5kg (11 lbs) of equipment.

Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above.

The monopod has one Easy Link 3/8" connector to allow an external monitor or other accessory equipment to be fitted.

Features:

Maximum Height: 6.6' (200 cm)
Weighs Just 4.6 lbs
Fluid Head Included
Long Sliding Plate
Side Lock System for Safety
3 Mini Legs at Base for Added Stability
Supports up to 11 lb

$329.99

Helmet Mounts

Samy's Camera — Mon, 30 Apr 2012 07:00:00 GMT

The Contour Helmet Mounts is a combination of mounts for all helmet types. Whether you’re using a vented, motocross, downhill, snow, skate, or climbing helmet, we have you covered. An extra 3M adhesive pack is included to allow you to easily change mounting positions or helmets.

Features:

Vented Helmet Mount
Left and Right Profile Mounts
Rotating Flat Surface Mount
Two Rotating Flat Surface Mount Adhesives
Weatherproof Carry Bag

$59.99

LCD Back Ball Mount Cage for GoPro Hero3

Samy's Camera — Wed, 27 Feb 2013 08:00:00 GMT

The UltraLight Control Systems GoPro Hero3 With LCD Back Ball Mount Cage is anodized aluminum cage that grasps the GoPro Hero3 Housing with LCD Back. The LCD cage has ability to have 3 balls attached to it or position the one ball in 3 spots.

$91.99

Trawly Add-On Kit For Simplis Dual & Pro

Samy's Camera — Sun, 25 Mar 2012 07:00:00 GMT

The Cinevate Trawly Add-On Kit For Simplis Dual & Pro is an add-on kit will allow you to transform your existing Simplis Dual or Simplis Pro into the Trawly Camera Dolly.

$99.00

Cyclops Rails Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Cinevate Cyclops Rails Kit consists of a fiber reinforced composite camera mount and a set of two 11.8" (30cm) long, 15mm diameter solid carbon fiber rails. Equipped with 1/4-20 locking thread, the camera mount is compatible with Libec and Manfrotto tripod base plates.

$188.00

Atlas 10 - 35" LTS with Regular Ball Feet

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

A full ball bearing linear tracking system that features the uber-cool all terrain foot system, no less than 7 tripod mount plate locations, micro-adjust non-marking feet, vertical operation and yes, even vertical counter-balanced operation. With a non-reflective, black satin anodized finish, full CNC aluminum/steel construction, and stainless steel fasteners, you can expect a lifetime of reliable operation.

The Atlas 10 carries a maximum weight of approximately 40 lbs. (18kg).

Please note that the Atlas 10 does not ship with a tripod head.

$679.00

Flat Surface Helmet Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

An extra Flat Surface Mount to attach the ContourHD or VholdR Wearable Camcorder virtually anywhere. Ideal for non-vented helmets and flat surfaces, this mount uses an all-weatherproof removable adhesive pad to adhere to almost any surface.

$19.99

Rotating Flat Surface Mount for ContourHD Camera

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Boost your videos with increased confidence thanks to the incredibly useful multi-purpose surface mount from Contour. Locking securely in place to deliver solid, slip free recording, this mount combines the ultimate of smart design with easy operation. Simply snap it into place and forget about it.
The Rotating Flat Surface Mount from Contour eliminates any concern about shifty video thanks to its sturdy and secure locking design. An incredibly useful tool for most any application the multi-surface mount was developed to provide simplicity of use, while upping confidence levels. Once locked in place this mount ensures nothing by solid, slip free video with no more effort than sliding the recording switch to on. Effortlessly mounted by sliding the camera onto the TRails, finding your desired angle is easy thanks to Contour's solid, ratchet type rotation. Once in place, simply push the lock button to securely hold your camera in slip free position, then you're set to capture stellar footage, without worry that the camera is going to change up the angle on you.

$19.99

MT Suction Cup Mount

Samy's Camera — Mon, 23 Jan 2012 08:00:00 GMT

The Contour Suction Cup Mount lets you mount your Contour camera to any windshield, car body or other flat (non-porous) surface. It features a convenient lock button and switch slide feature that securely fastens your mount to the chosen surface. Plus, the mount affords turn and tilt, as well as 360° camera rotation.

FEATURES:

Works with Contour Cameras
Powerful Suction Cup with Button Lock
Turn, Tilt & Rotate Your Camera 360°
Designed for Windshields & Flat Surfaces

$39.99

Surfboard Mount for GPS and Plus Waterproof Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Surf-Wake Mount from Contour is designed as a most adjustable mounts, built to withstand any weather and waves that you put it through. The adhesive pad securely adheres the mount to your board and the 360deg. rotating base and rubber ball joint lets you capture any angle on the water or at the beach.

$39.99

Fat Gecko Stealth Single Suction Camera Mount

Samy's Camera — Mon, 16 Jan 2012 08:00:00 GMT

Secure your digital camera to the side of a helmet, atop your surfboard or onto any other smooth solid surface. This low profile suction cup guarantees a reliable hold for equipment up to 1lb (16oz) in strenuous environments where wind, vibration, g-force or rain may come into play. Adjustable 180 degree rotation at the base of the Stealth Mount enables complete control of filming angles and perspectives during any sport or activity, while a discreet compact build provides optimal stability without any added weight or interference.

$22.95

Fat Gecko Mini Camera Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Fat Gecko Mini uses the unbelievable strength of locking suction and a universal mounting screw to securely attach any standard camera or camcorder to the vehicle or object of your choice. The Fat Gecko Mini is ideal in situations where size and weight are critical, especially in extreme sports where a compact camera is preferred and dual suction isn't necessary. With an adjustable joint and a 3" extension bar, it's easy to set up shots over a windshield, around an instrument panel, over a binding, or anywhere else that a standard tripod or camera mount wouldn't normally holdup - this is one extreme mount for extreme conditions. Attaches to any smooth surface; surfboards, motorcycles, wakeboards, ATVs, helmets, windows and more.

FEATURES:

Universal ¼" tripod camera mount
Extendable height with 360° tilt, turn & rotation
offers unlimited shooting possibilities
Powerful locking suction attaches to any smooth, flat, non-porous surface
Ruggedized construction holds up in extremes
Quickly move cameras from surface to surface
2 year warranty included

$34.95

Fat Gecko Gator Camera Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Fat Gecko Gator Mount is a revolutionary new camera mounting device used to hold a camera in place while clamped to almost any surface. With a universal 1/4" tripod thread, a vise-like grip and a three inch "mouth", the Gator Mount can securely attach to a wide range of surfaces while holding digital still cameras, video cameras and more.

From wedding and commercial photographers, world travelers, action enthusiasts and more, the Fat Gecko Gator Camera Mount expands hands free shooting possibilities for still and video creation in almost any situation. In addition, the wide three inch 'mouth', vise-like grip, rugged construction, and 360 degree rotating knuckle makes the Gator Mount a go-anywhere.

FEATURES:

Universal 1/4" tripod camera mount
Works with any camera using 1/4" tripod thread
Unlimited shooting angles with adjustable 360 degree tilt, turn & rotation
Attaches to unlimited surfaces with powerful locking vise
Holds up in extreme conditions with ruggedized construction

$34.95

Fat Gecko Dual-Suction Camera Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Delkin's newest DIMA Award winning accessory is the Fat Gecko camera mount. The Fat Gecko Dual Suction Cup Mount that allows all photo and video enthusiasts to quickly and easily create photos and videos in any situation. The Fat Gecko suction cup mount allows users to secure cameras to motorcycles, cars, trucks, airplanes, or any other smooth, flat, non porous surface. The blend of rugged design and ease of use makes Delkin's Fat Gecko camera mount optimal for use in a multitude of situations. Fat Gecko's suction cups are so strong they can hold a eight pound camera and the double knuckle design and 2" extension tube allow for 360° tilt, 360° turn & 360° rotation for all the best filming angles in any activity. The ¼ x 20 tripod mounting screw means users can use virtually any digital still or video camera on the market. In addition, the suction cups use a quick release function to make attaching and detaching you camera easy and fast. With four adjustable joints and an optional extender bar, it's easy to set up shots over a windshield, around an instrument panel, on top of handlebars, or anywhere else that a standard tripod or camera mount wouldn't normally hold up - this is one extreme mount for extreme conditions.

FEATURES:

Works With All Cameras - The ¼ x 20 tripod mounting screw means you can use virtually any digital still or video camera on the market.
Rugged Construction Durable For Years - Steel frame construction is rugged and durable in design and construction, this steel mount can withstand the most extreme turbulence.
Expandable Mounting Options - Loosen the top-most clamp to remove the standard ¼ x 20" photo mounting screw and the Fat Gecko can adapt to mount an array of other devices, including GPS systems, aircraft antennas and more.
Double Knuckle Design - Allows for 360° tilt, 360° turn & 360° rotation for all the best filming angles in any activity - whether the mount is attached to an airplane canopy above your head or the side of your Ducati.
Dual Suction Cups - Secure cameras to any smooth surface including; motorcycles, cars, airplanes,and more. Fat Gecko's suction cups are so strong they can safely and securely hold a camera weighing up to eight pounds. With Fat Gecko you can use heavier, more advanced video cameras to provide the best footage possible.

$69.95

DLC P&C Handgrip

Samy's Camera — Wed, 29 Feb 2012 08:00:00 GMT

Here is the perfect and quick answer to help stabilize video shots with smaller HDSLR’s, mirror-less interchangeable lens cameras and compact digital cameras: a grip. The Photo and Cinema Grip is different than most grips on the market today. Traditionally, pistol grips have been designed for movie or video cameras which are long and therefore the grip has had a narrow platform to match the shape of the camera. The new Dot Line P&C Grip is designed for today’s cameras that have a wide profile, thus providing a grip with maximum surface to better support the camera. Additionally, the grip is “rubberized”. All of this improves handling as everything is more ergonomic and stable. Plus, this grip has a removable D-ring exposing standard female 1/4-20 threads allowing the grip to accept accessories such as the DL-0390 and DL-0392 Articulating Friction Arms. With a little creativity and thought, the P&C Grip can be used to aid in a variety of otherwise difficult-to-get shots. The P&C Grip is 4.75” long with a 2-5/8” wide platform.

$19.95

DLC V3 Video Stabilizer (With Pouch)

Samy's Camera — Wed, 01 Feb 2012 08:00:00 GMT

The Dot Line DLC V3 Video Stabilizer (With Pouch) is a simple answer to shaky videos. The slim telescoping arm rests against the body and can be adjusted from 17” to 26” in length with a simple flip of a lever, yet locks securely at the desired length for the photographer’s comfort. The head can be tilted up to 110° and features a 2 button quick release plate making it easy to put the camera on or remove it from the V3, yet preventing accidental removal. The 1” wide black nylon neck strap has adjustable length and features a quick release to make it a snap to attach around the neck as well as a shoulder pad. The neck strap can also be completely removed from the V3 if the photographer desires. Complete with protective pouch.

Features:

Support for DSLR Video Shooting
17 to 26" Adjustable Arm
Adjustable, Removable Neck Strap

$24.95

Body Pod

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Glidecam Body pod is a lightweight, rigid support system which, when used with either the Glidecam 2000 Pro, or 4000 Pro hand-held stabilizers, allows all the weight of the system to be supported by your body. The Body-pod allows you to shoot in cushioned comfort for indefinite periods of time. It takes the stabilizer's weight out of your hands and arms and displaces the weight onto your waist and shoulders. Stress and fatigue are virtually eliminated, allowing you the freedom to shoot events that require uninterrupted shooting. The Glidecam Body-pod is designed to allow you to quickly slide the handle of either the 2000 Pro, or 4000 Pro on and off its rigid support, so you can quickly switch back and forth between hand-held stabilization shooting and body mounted shooting.

Since the support of the Body-pod is rigid and for the most part inflexible, it will not absorb and smooth out camera movements as well as a stabilizer which is being held in just your hands. However, shooting with your stabilizer attached to the rigid support of the Body-pod still yields results that are far better than unstabilized, hand-held shooting or shoulder supported shooting. Once you get used to using the Glidecam Body-pod, you won't want to shoot anything without it.

$169.95

XR-1000 Stabilizer System

Samy's Camera — Thu, 23 Feb 2012 08:00:00 GMT

The amazingly advanced and re-designed Glidecam XR-Series from Glidecam Industries brings versatility and affordability to the world of Hand-Held Camera Stabilization. The lightweight and state-of-the-art Glidecam XR-1000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. With the Glidecam XR-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake.

The Glidecam XR-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical. Each XR-Series Stabilizer's offset, foam cushioned, Handle Grip is attached to a free floating, three axis Gimbal. This allows your hand to move up and down, and side-to-side, thereby isolating your hand's unwanted motions from the camera. This up and down movement alleviates the bouncing, pogo-type action often associated with our competitor's system because their handle cannot move up and down. This design feature, coupled with the overall higher inertia of the XR-Series systems, produces superior stabilization when compared with our competition. A unique and proprietary, precision, three-axis Gimbal incorporates several adjustable, axis convergence controls. This allows all three axes to intersect for proper operational alignment.

The Camera Mounting Platform can be adjusted to move back and forth, and side to side, to quickly allow you to adjust the camera's horizontal balance.By varying the amount of Counter Weight Disks on the Base Platform, or by changing the length of the no-tools telescoping Central Post, you adjust the camera's vertical balance. When balanced properly the camera floats, ready for you to move into action.

Designed for compact, low profile cameras weighing up to 3 pounds.
Camera Mounting Head Dimensions: 5.50" x 3.25" x .75"
Base Platform Dimensions: 7.81" x 3.25"
Central Support Post: .75" diameter
12" tall in shortest mode
16" tall in longest mode
Weight: 1.5 pounds without Counter Weight Discs.
Each large Counter Weight Disc averages 2.75 ounces.
Each small Counter Weight Disc averages 1 ounce.
The Glidecam XR-1000 includes 8 large and 4 small Counter Weight Discs.
8 large Counter Weight Discs = 1.38 pounds
4 small Counter Weight Discs = .25 pounds
Camera Mounting Plate has 1/4" mounting holes.
Base Platform has 1/4" mounting hole for optional LCD Monitor attachment.
Made in USA.

$269.00

XR-2000 Stabilizer System

Samy's Camera — Thu, 23 Feb 2012 08:00:00 GMT

The amazingly advanced and re-designed Glidecam XR-Series from Glidecam Industries brings versatility and affordability to the world of Hand-Held Camera Stabilization. The lightweight and state-of-the-art Glidecam XR-2000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. With the Glidecam XR-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake.

The Glidecam XR-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical. Each XR-Series Stabilizer's offset, foam cushioned, Handle Grip is attached to a free floating, three axis Gimbal. This allows your hand to move up and down, and side-to-side, thereby isolating your hand's unwanted motions from the camera. This up and down movement alleviates the bouncing, pogo-type action often associated with our competitor's system because their handle cannot move up and down. This design feature, coupled with the overall higher inertia of the XR-Series systems, produces superior stabilization when compared with our competition. A unique and proprietary, precision, three-axis Gimbal incorporates several adjustable, axis convergence controls. This allows all three axes to intersect for proper operational alignment.

The Camera Mounting Platform can be adjusted to move back and forth, and side to side, to quickly allow you to adjust the camera's horizontal balance.By varying the amount of Counter Weight Disks on the Base Platform, or by changing the length of the no-tools telescoping Central Post, you adjust the camera's vertical balance. When balanced properly the camera floats, ready for you to move into action.

Designed for compact, low profile cameras weighing from 2 to 6 pounds.
Camera Mounting Head Dimensions: 6.00" x 4.187" x .75"
Base Platform Dimensions: 10.00" x 4.00"
Central Support Post: 1" diameter
15" tall in shortest mode
22" tall in longest modE
Weight: 2.1 pounds without Counter Weight Discs.
Each large Counter Weight Disc averages 2.75 ounces.
Each small Counter Weight Disc averages 1 ounce
The Glidecam XR-2000 includes 12 large and 4 small Counter Weight Discs.
12 large Counter Weight Discs = 2.07 pounds
4 small Counter Weight Discs = .25 pounds
Camera Mounting Plate has 1/4" mounting holes.
Base Platform has 1/4" mounting hole for optional LCD Monitor attachment.
Made in USA.

$359.00

HD1000 Stabilizer System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The lightweight and state-of-the-art Glidecam HD-1000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. The Glidecam HD-Series offers advanced features and a degree of sophistication never before seen in a line of Hand-held Camera Stabilizers.

With the Glidecam HD-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake. The Glidecam HD-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical.

FEATURES:

Fine adjustment Camera Balance Platform
Integrated quick-release Camera Plate
Adjustable convergence, precision, three axis Gimbal
No-tools telescoping Central Post
Adjustable dynamic balance and inertial control Base Platform
Foam padded Handle Grip

$369.95

XR-4000 Stabilizer System

Samy's Camera — Thu, 23 Feb 2012 08:00:00 GMT

The amazingly advanced and re-designed Glidecam XR-Series from Glidecam Industries brings versatility and affordability to the world of Hand-Held Camera Stabilization. The lightweight and state-of-the-art Glidecam XR-4000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. With the Glidecam XR-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake.

The Glidecam XR-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical. Each XR-Series Stabilizer's offset, foam cushioned, Handle Grip is attached to a free floating, three axis Gimbal. This allows your hand to move up and down, and side-to-side, thereby isolating your hand's unwanted motions from the camera. This up and down movement alleviates the bouncing, pogo-type action often associated with our competitor's system because their handle cannot move up and down. This design feature, coupled with the overall higher inertia of the XR-Series systems, produces superior stabilization when compared with our competition. A unique and proprietary, precision, three-axis Gimbal incorporates several adjustable, axis convergence controls. This allows all three axes to intersect for proper operational alignment.

The Camera Mounting Platform can be adjusted to move back and forth, and side to side, to quickly allow you to adjust the camera's horizontal balance.By varying the amount of Counter Weight Disks on the Base Platform, or by changing the length of the no-tools telescoping Central Post, you adjust the camera's vertical balance. When balanced properly the camera floats, ready for you to move into action.

Designed for compact and full size cameras weighing from 4 to 10 pounds.
Camera Mounting Head Dimensions: 7.00" x 4.75" x 1.125"
Base Platform Dimensions: 12.00" x 5.00"
Central Support Post: 1" diameter
20" tall in shortest mode
28" tall in longest mode
Weight: 3 pounds without Counter Weight Discs.
Each large Counter Weight Disc averages 2.75 ounces.
Each small Counter Weight Disc averages 1 ounce.
The Glidecam XR-4000 includes 12 large and 4 small Counter Weight Discs.
12 large Counter Weight Discs = 2.07 pounds
4 small Counter Weight Discs = .25 pounds
Camera Mounting Plate has 1/4" & 3/8" mounting holes.
Base Platform has 1/4" mounting hole for optional LCD Monitor attachment.
Made in USA.

$479.00

HD2000 Stabilizer System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The lightweight and state-of-the-art Glidecam HD-2000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. The Glidecam HD-Series offers advanced features and a degree of sophistication never before seen in a line of Hand-held Camera Stabilizers.

With the Glidecam HD-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake. The Glidecam HD-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical.

FEATURES:

Fine adjustment Camera Balance Platform
Integrated quick-release Camera Plate
Adjustable convergence, precision, three axis Gimbal
No-tools telescoping Central Post
Adjustable dynamic balance and inertial control Base Platform
Foam padded Handle Grip

$499.00

HD4000 Stabilizer System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The lightweight and state-of-the-art Glidecam HD-4000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage. The Glidecam HD-Series offers advanced features and a degree of sophistication never before seen in a line of Hand-held Camera Stabilizers.

With the Glidecam HD-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera - panning, tilting, booming or running without any camera instability or shake. The Glidecam HD-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical.

FEATURES:

Fine adjustment Camera Balance Platform
Integrated quick-release Camera Plate
Adjustable convergence, precision, three axis Gimbal
No-tools telescoping Central Post
Adjustable dynamic balance and inertial control Base Platform
Foam padded Handle Grip

$599.00

Smooth Shooter Support System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Glidecam Smooth Shooter is the World's most sophisticated and affordable body mounted Camera Stabilization System designed for Cameras weighing up to 6 pounds when used with the Glidecam 2000 Pro, or for Cameras weighing from 4 to 10 pounds when used with the Glidecam 4000 Pro. The Glidecam Smooth Shooter system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.

The Smooth Shooter system works by isolating your body's motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The Smooth Shooter's Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm, which isolates your motions from the camera in a way that creates smooth camera footage.

$1,394.95

Helmet Front Mount

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

Mount your GoPro camera to your helmet with the GoPro Helmet Front Mount which allows for low-profile positioning of your camera on the front of your helmet, like a headlamp. Also extends the camera out in front of the helmet for self-portrait videos and photos. Compatible with ALL HD Hero Original + HD Hero 2 Professional Cameras.

$12.99

Head Strap Mount

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

Attach your GoPro camera to the GoPro Head Strap Mount and wear it like a headlamp. Also fits over helmets. One size fits all. Compatible with ALL HD Hero Original + HD Hero 2 Professional Cameras.

NOT RECOMMENDED for high-impact sports. Only recommended for non-impact activities.

$14.99

Surfboard Mounts

Samy's Camera — Mon, 06 Feb 2012 08:00:00 GMT

Attach your GoPro camera to surfboards, standup paddle boards, sea kayaks, boat decks, and other gear where maximum holding strength is needed. Includes FCS compatible male plug to mount GoPro camera using FCS center fin socket.

$19.99

NVG Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The NVG Mount from GoPro allows you to mount an HD HERO camera to any military or police helmet that's outfitted with a standard NVG (night vision goggle) mounting plate. The mount is compatible with all GoPro quick-release cameras, including HD HERO, HD HERO 960, and the Wide HERO camera.

$19.99

Handlebar / Seatpost Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Ride HERO is a combination handlebar and seat post mounting clamp. Compatible with the housing that comes with the Helmet HERO and Motorsports HERO. Sold as a separate accessory, the Ride HERO allows for stable on-bike video on all types of bikes. Also fits motorcycle handlebars, quad bumper bars, and more.

$19.99

Camera Tethers

Samy's Camera — Tue, 16 Oct 2012 07:00:00 GMT

Use these camera tethers and adhesive anchors to further secure your GoPro camera in extreme conditions. The tethers attach to the camera housing’s backdoor and the adhesive anchors attach to your gear.

$19.99

Chest Mount Harness

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Use the GoPro Chest Mount Harness for your quick-release HERO camera. Makes it easy to capture immersive video and photo footage from, well...your chest. Perfect for skiing, mountain biking, motocross, paddle sports, or any activity where you want to get a "lower than the helmet" view of the action. See more of your arms, knees poles, and skis while skiing...or your arms and handlebars while biking or riding your motorcycle. Recommended as a more immersive way to film than on the helmet.

$39.95

WristShot Camcorder Support System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The WristShot transfers camcorder weight to the forearm eliminating wrist fatigue, increasing stability and freeing up the hand to operate the camera. WristShot fits all camcorders up to 10 pounds. With 5 axis adjustment options WristShot fits all body types and shooting styles. Quick release camcorder mounting system with universal tripod adapter mount makes changing shooting modes quick and easy.

$69.99

DV Runner

Samy's Camera — Tue, 10 Apr 2012 07:00:00 GMT

The DV Runner is extremely lightweight and compact with a spider-like design that captures quick cinematic shots. It has quickly evolved into our lightest rig. The DV Runner delivers stability control through its three points of contact granting great balance. This portable rig was initially created for video camcorders, but it can be used on a wide range of video capture devices, including DSLR cameras. The most essential feature available is the price; we are glad to announce that this rig is our most cost effective rig we have ever offered.

$149.99

Modosteady 585 Camcorder Counterbalancing Stabilizer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Modosteady 585 is mainly used as camcorder counterbalancing stabilizer. Initially, the counterbalancing stabilizer needs to be set in order to find the proper counterbalance position and weight, considering the weight and the centre of gravity of the camcorder. The 585 can be used also as a shoulder support. Its bi-injected foot can be used as shoulder pod, so that the Modosteady becomes an extension of the body. Finally, folding the extension arm, the bi-injected handle can be opened and Modosteady becomes a table tripod, useful also for still-pictures.

$109.99

X-Grip Stabilization Handle for Professional Video Camera

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The X-Grip Handle for Prof. Camera adds an extra level of convenience and control to your video production by providing a comfortable top handgrip--and a stable base--to your camcorder or DSLR. This not only allows for easier transport, but gives you the freedom to shoot smoother, more stable video from below the waist and even at ground level. So when you're ready to pump up a scene's action quotient, shooting from a skateboard, rollerblades or even a bike becomes far less challenging. A hot shoe adapter on the front of the handle allows for convenient mic or light placement, so that even quiet, handheld dialogue scenes will benefit from using Opteka's X-Grip.

FEATURES:

Provides stabilization for action video shoots
Fits most compact camcorders, digital cameras, and entry SLRs
Hot shoe allows attachment of a flash or video light
Foam padded handle alleviates the stress of lengthy filming

$29.95

Orbitor Camera Support Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The PAGLight Orbitor Support Kit is a shoulder-mounted camcorder support system that provides balance and mobility when shooting with any hand-held camcorder. Even a lightweight handheld camcorder can cause muscle fatigue after hours of shooting. The PAG Orbitor distributes the weight of the camcorder comfortably across the body, and provides a stable shooting platform that enables hours of use without fatigue.

Freedom of movement is achieved by a 3-axis mechanism, controlled by variable tension clutches, that enable you to pan, tilt and roll, smoothly. The camera feels weightless and control of its movement is effortless, requiring the lightest touch. The system’s flexibility makes a large range of shots possible. The PAG Orbitor enables you to shoot with the camera at right-angles to your body, which is ideal for shooting in a car, or for tracking shots on a staircase. The PAG Orbitor is the most mobile, yet stable, shooting platform of its kind.

The camcorder is mounted to a quick-release sliding camera plate, which allows fine adjustment of its position to achieve the correct point of balance on the assembly.

The camcorder is counterbalanced by a weight (supplied) mounted to the back-plate of the system’s shoulder pad assembly.

In place of the weight, a battery pack can be used, which will also power a camera light. The back-plate can be fitted with a PAGlok connector, enabling you to power the camcorder and the 12V Paglight M, via a DC Adaptor, using professional PAG 12V to 14.8V batteries.

Alternatively, the 6V battery, supplied as part of the Paglight C6 Kit, can be used to power both the camcorder and the Paglight C6, via a 6V to 7.2V DC Adaptor.

The position of the shoulder pad assembly can be adjusted to fit any operator, and features a cushioned shoulder pad, to provide the maximum comfort during use. Adjustable straps secure the shoulder pad assembly to the waist belt, and maintain the ideal position during use.

Features:

Balanced and stable shooting platform.
Reduces fatigue on long shoots.
3-axis control lets you pan, tilt and roll, smoothly.
Camera feels weightless and control is effortless.
Allows a wide range of shooting techniques.
Shoot at right-angles to your body, in a car or on a narrow staircase.
Hands free resting is possible between shots.
Fully-adjustable for any operator.
Fully-adjustable for any camcorder.
Quick release camera plate.
Suspension rod absorbs camera shake.
Adjustable shoulder assembly incorporates cushioned pad.
Shoulder straps are secured to a waist belt, maintaining the ideal position during use.
Tough but lightweight construction.
Disassembles quickly.
Professional accessories such as remote controls and LCD monitors can be clamped to the structure*.
Mount a PAGlok Connector to the Orbitor back-plate and power the camcorder and Paglight M from 12V to 14.8V PAGlok batteries (via a DC Adaptor)*

Specifications:

Total weight: 3.9kg (8.6lbs) including counterbalance.
Max. weight supported by system: 4.5kg (9.9lbs).
Belt fits waists up to 46" (larger belt available on request)

* These accessories are not included.

$695.95

microMount Cold Shoe Spud

Samy's Camera — Thu, 27 Sep 2012 07:00:00 GMT

The Redrock Micro microMount Cold Shoe Spud attaches the Shoe-Accessory onto 15mm Rod and features 1/4"-20 Screw and Screw-Hole. The mount is tyipcally used to connect two lengths of 15mm rod together usually used for building out rigs.

The cold shoe spud is a machined accessory that enables you to attach a cold shoe-mounted accessory to rigs or camera setups. For the Canon EOS C300 this is extremely helpful to attach the LCD/audio accessory to your ultraCage™ rig.

$91.00

ultraCage Blue Top Handle Assembly

Samy's Camera — Thu, 27 Sep 2012 07:00:00 GMT

Add the Redrock Micro ultraCage Blue Top Handle Assembly to gain the ability to sling the camera low to the ground for a unique perspective, or simply make the camera easier to carry from location to location, whatever your needs, the top handle can work on nearly every rig and can be pointed forwards or backwards for maximum convenience and comfort.

The ultraCage Top Handle is one of three top handle configurations for the ultraCage. This configuration offers a single top handle that is attached to the front cage, and is perfect for lighter weight or more compact configurations, particularly handheld or shouldermount setups.

Redrock Micro ultraCage Blue Top Handle Assembly

$134.25

ultraCage Blue 19mm Top Rail Clamp

Samy's Camera — Thu, 27 Sep 2012 07:00:00 GMT

The Redrock Micro ultraCage Blue 19mm Top Rail Clamp is an accessory for the ultraCage™ that adds 19mm top rails onto any ultraCage system. The ultraCage already supports adding a 19mm baseplate, so the 19mm top rails are a nice way to standardize on 19mm throughout the rig.

The 19mm clamp connects to the top of the ultraCage and top handles are then attached to the 19mm clamp. 19mm clamps can be used in single or double configuration, though often double-configuration is used in combination with the ultraCage | blue rear chassis cage to create an incredibly solid full-sized support cage. Add a pair of Redrock 19mm carbon fiber rails and you are ready for anything.

Due to the spacing of 19mm Rails, the top plate is larger then the existing plate atop the ultraCage. Because of this you will also be gaining four additional 3/8"-16 threads when the plate is attached.

$150.00

1080 Lowboy Mount

Samy's Camera — Sun, 16 Sep 2012 07:00:00 GMT

The Replay XD 1080 Lowboy Mount is our lowest profile mount, designed to be low and out-of-the-way, offers 360º lens rotation, not including the unlimited areas you can mount 1 included SnapTray VHB base.

*LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

$15.99

1080 HemiLock Mount

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

The Replay XD1080 HeimLock Mount (Swivel/Tilt) features spherical adjustment with an eccentric cam-lock for a rock solid mount. Over 1,036,800 Mounting Positions with 360º lens rotation, 360º camera rotation, and 8º of tilt, not including the unlimited areas you can mount 1 included SnapTray VHB base.

Included in package: 1 HeimLock Mount and 1 Flat SnapTray with 3M® VHB adhesive to securely mount to smooth surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

$19.99

HardCore Billet Aluminum Skateboard Truck Mount

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

Rugged and lightweight billet aluminum skateboard truck mount. Features 2-Way, 360° positioning for unlimited camera angles and 10° incremental Camera ring positions. Flat bottom, low profile shape fits around and mounts to most common skateboard trucks for a positive and rock solid mount. You can add a second Camera Clamp to capture other rad angles. Black anodized for that sleek look.

$20.00

Suction Cup Arm Mini Clamp

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

The billet aluminum Suction Cup Mini Clamp allows you to add an extra camera or two or three to your Suction Cup Mount. Just slide it onto the Suction Cup billet arm and add another Replay XD for multiple camera angles.

$25.00

Baby Pin Mini Clamp 5/8 inch

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

The billet aluminum Baby Pin Mini Clamp allows you to add an extra camera or two or three to your 5/8 in Baby Pin of choice.

$25.00

1080 Camera Clamp

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

Rugged and lightweight billet aluminum Replay XD1080 Camera Clamp for all of our HardCore Billet Base Clamp lineup. Features 360° positioning for unlimited camera angles. Flat bottom with 10° incremental machined serrations. Includes cap screw.

$39.00

Suction Cup Mount (Short Arm Base)

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

A suction cup mount with some high-end flare. We took a traditional Panavise suction-cup mount and machined a billet aluminum arm and camera clamp to create an ultra rigid mount. All of this combined provides a solid solution to capture crisp and stable video.

$40.00

Suction Cup Mount (Long Arm Base)

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

Aluminum Suction Cup Mount (Long Arm Base)

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

Aluminum Suction Cup Mount (Short Arm Base)

Samy's Camera — Thu, 16 Aug 2012 07:00:00 GMT

$89.99

GoPro HD HERO & HD HERO2 Mount for Smoothee

Samy's Camera — Mon, 25 Jun 2012 07:00:00 GMT

This GoPro HD HERO & HD HERO2 Mount for Smoothee from Steadicam allows you to use your HD HERO or HD HERO2 action camera with a Steadicam Smoothee stabilization device.

The mount includes a belt clip and features a quick-release element for the camera.
v Features:

Mount Camera to Smoothee
Quick Release
Belt Clip Included

$24.95

Docking Bracket for the Merlin Camera Stabilizer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Steadicam docking bracket is for the Merlin camera stabilizer system. This bracket works with display stands to allow the Merlin to stow upright while preparing for usage.

$39.95

SSCOMPACT Compact Steady Stick for Small Camcorders

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Portable camera support for DV's Compact version of the Pro Steady Stick Can be used with all Mini DV, Hi8, 8mm , and VHS cameras with 1/4"-20 standard tripod socket Belt-mounted support arm shifts camera weight from shoulder to torso Padded swivel belt holster and heavy-duty 2" belt included Multi-position handle offers added maneuverability when attached to either side of camera or used as shoulder rest.

$99.95

Custom Fitted Travel Case for Merlin Camera Stabilizer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Steadicam Custom-Fitted Merlin Travel Case allows an operator to securely stow a mounted and balanced camcorder on the Merlin stabilizer in order to be ready for the next shot when working in changing conditions. Ample room is provided to store ancillary equipment, and the durable outer shell affords protection from the elements while in transit.

FEATURES:

Stabilizer may be stowed with camera mounted
Durable, weather-resistant outer shell
1-Year Warranty

$129.95

SteadiStand for the Merlin Stabilizer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This is the Steadicam SteadiStand for use with the Merlin Stabilizer

Includes 1-Year Warranty

$164.95

Merlin 2 Camera Stabilizing System

Samy's Camera — Mon, 05 Mar 2012 08:00:00 GMT

The Steadicam Merlin 2 Camera Stabilizing System lets you go anywhere due to its light weight to capture up or down steps, indoors and out, through crowds, almost without limitation. It gives you precise, elegant control for dramatic, professional you-are-there footage. The quick-release mount lets you instantly switch between your stabilizer and any tripod. It features a metal gimbal for smooth camera movement.

Features:

The robust stage design features a rigid camera plate, multi-angle viewable level, and larger easily adjustable knobs for secure camera mounting and ease of use
A secure gimbal lock allows for precise tuning
The lens platform adjusts to various heights and angles to help support longer lenses and camera bodies
The ergonomic handle affords a comfortable grip for hours without undue fatigue for either right- or left-handed users
All parts are stainless steel, aluminum or brass for corrosion resistance
Dovetail plate and gimbal are retrofittable with original Steadicam Merlin
Top dovetail plate has been designed to clear battery doors on most DSLR cameras
Secure metal interconnect to Merlin arm post
Sleek new black and stainless steel styling

$599.00

Arm and Vest for use with the Merlin Camera Stabilization

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Steadicam Merlin Arm and Vest make extended shooting seem effortless. This system works with cameras up to seven pounds (3.2kg). Using with the optional metal gimbal, the Merlin can fly for hours without undue fatigue, preserving the flexibility and reach of the operator's arms.

FEATURES

Merlin Vest
The 2.6 lb (1.2 kg) Merlin Vest is light and thin; it can even be worn under a tuxedo jacket. it's designed to fit many human sizes and shapes. It will fit 23 kg eight-year-olds to 150 kg linebackers. The Merlin Vest provides comfort and functionality for extended productions and long continuous shots. All adjustments are 'no-tools, including the right-arm/left-arm changeover.

Merlin Arm
The Merlin Arm is ultra-light and extremely capable; it's a 7/8 scale version of the Flyer, G-50 and G-70 arms. It provides performance and flexibility including instant, knob-adjustable control of lifting power for camera payloads between 2.5 and 7 lbs. (1.1 to 3.2 kg).

ITEMS INCLUDED

Merlin Arm
Merlin Vest
1 Year Parts, 90 Day Labor Warranty

$1,574.95

Pilot-AA Camera Stablization System with 5.8" LCD Monitor and AA Battery Mount

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Steadicam Pilot-AA is a state of the art, lightweight stabilizer system designed especially for the modern breed of lightweight cameras from 2 to 10 pounds. It features a 5.8" monitor, Iso-elastic Arm and ultra low profile vest, lightweight sled with CarbonLite expandable post.

FEATURES

AA Option
The AA option allows the monitor to be powered by AA batteries by including a AA battery mount.

Iso-Elastic Arm
The Iso-Elastic arm is a two-section, articulated, design that can be adjusted while supporting the camera. With this patented, unique design, the Steadicam operator can smoothly and effortlessly raise or lower the arm throughout its 28 inch boom range.

Vest
A low profile vest allows the Iso-Elastic Arm to work in a very smooth fashion.

Low Mass Gimbal
Utilizing a proven Low Mass Gimbal the operator has the ability to capture the fluid movement that only Steadicam can provide.

LCD Monitor
A 5.8" 16:9 LCD monitor is offered for great images and an upgrade to a modern aspect ratio.

ITEMS INCLUDED

Vest
Arm
Center Post
Sled
Stage Plate
LCD Monitor
Battery Mount
Counter Weights
Manual
1 Year Parts, 6 Months Labor Warranty

$3,495.00

S Lens Ring for GoPro

Samy's Camera — Sun, 06 May 2012 07:00:00 GMT

The Unruly S Lens Ring for GoPro replaces the standard GoPro clear dome and ring while providing standard filter options, protection and eliminating underwater lens blur.

Features:

Accepts standard 2"x2"square glass filters.
Eliminates underwater lens blur.
Pressure rated with front and rear O-Rings.
Low profile, wide shape means the s lens ring will not vignette in any shooting mode.
Remove the glass filter to use the s lens rig and cap to protect the GoPro glass dome.

$54.40

HeadGear for GoPro

Samy's Camera — Sun, 06 May 2012 07:00:00 GMT

The Unruly HeadGear for GoPro protects your GoPro clear case and gives you unlimited mounting options. This GoPro camera cage is made of anodized aluminum with 8 1/4"-20 mounting holes tapped into it. This allows you to mount your GoPro Hero or GoPro Hero2 to anything, or mount anything to your gopro! It's a more robust mounting solution than the Go Pro's protective housing, and it also helps protect your camera. The included replaceable anode is great when you are using your Headgear cage in wet environments. It is designed to corrode before your cage does, and if it does, you can replace it.

Features:

Mounts your camera in any configuration with 8x threaded mounting holes.
Prevents damage to your fragile camera with the super-tough anodized aluminum frame.
Replaceable anode protects headgear from salt water corrosion.

The Unruly Headgear GoPro Hero / Hero2 Cage housing is made from anodized aluminum and serves to both protect your Go Pro Action camera and also provides the user with a total of 8 x 1/4"-20 mounting points.

A 9/64 allen wrench is needed to install the GoPro housing into the Unruly Headgear

$138.00

Belt Holster Support for Flowpod System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The VariZoom VZ-Belt is a waist belt support holster for use with the FlowPod Stabilizer System. It is especially ideal for use with the FlowPod Extension, where the extension keeps the camera feet above the operator, providing an "overhead shot" while distributing the camera weight to the operator's hip.

$19.95

FlowPod Mini Hand-Held Camera Stabilizer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The VZ-FP-MINI is a smaller version of the award winning FlowPod series. The key differences are a much lighter body designed to accomodate todays smaller point & shoot cameras as well as small compact DSLR's such as the Canon T1, T2 and similar size cameras that weight 1.6lbs or less. While the original FlowPod has a monopod that extends all the way to the floor, the FP-Mini accomplishes this by allowing you to rest the monopod in the included camera support belt providing you with more mobility. The FP-Mini will also work some of todays most popular smart phones.

$284.95

Flowpod Stabilizer System with Telescoping Monopod

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The FlowPod stabilizer system, is Varizoom newest addition to the line of support gear for mini-DV videographers. This uniquely styled device is the most versatile piece of support gear on the market. Designed to work perfectly with or without a VariZoom control, the FlowPod merges the popular StealthPod monopod with this patent pending stabilizing system. The unique multi-purpose handle features a telescoping pin that can either be locked inline for use as a monopod or unlocked to allow free floating action shots. The slim design allows for ease of use in the tightest of shooting situations. Just grab the FlowPod stabilizer, mount your camera and start recording. The FlowPod will give you smooth footage, while walking, running or even going up and down stairs without any camera instability or shake.

FEATURES:

High quality aluminum construction.
Locking/Unlocking pivoting foam handle grip, for use as a monopod or as a stabilizing system.
Use it with or without Varizoom's zoom and focus controllers.
Optional Low Flow kit, allows for low-to-the-ground video shot, especially on moving things.
Ideal for camcorders with a payload of up to 8 lbs.

$379.95

FlowPod Hand-Held Camera Stabilizer with Carry Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Our proprietary handle & gimbal design can either be unlocked as a fluid gimbal for floating stabilizer shots or locked inline for stationary monopod shots. The slim design and narrow base allow the shooter to hold the FlowPod close to the body, relieving stress and enabling tight maneuvers in the most varied circumstances.

The optional Low Flow kit allows gliding low perspective shots and makes the FlowPod a 3-in-1 tool.

FEATURES:

Locking handle grip allows fluid turns, pans, and tilts in stabilizer mode or rock solid stationary shots in monopod mode
Optional low mode kit for stabilized low-angle shots also allows for attachment of TFT monitor for easier viewing
Clean and accurate counter balance system utilizes positionable ring weights along the lower shaft
Precision balance system: X-Y camera plate provides fore/aft adjustment for horizontal balance and sliding counterweights allow for exact vertical balance adjustment
Balancing plate (included) functions as a docking stand while balancing the FlowPod or resting it when not in use
Upgradable with either DV Sportster or Navigator arm/vest systems (see 'Related Products')
VZ-FP1 weight kit required for use with the Canon XL1/XL1s or cameras over 5 lbs (FlowPod not recommended for Canon XL2 or JVC HD100U)

$398.95

FlowPod Hand-Held Camera Stabilizer with Carry Case, & Low Flow Kit

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Locking handle grip allows fluid turns, pans, and tilts in stabilizer mode or rock solid stationary shots in monopod mode
Optional low mode kit for stabilized low-angle shots also allows for attachment of TFT monitor for easier viewing
Clean and accurate counter balance system utilizes positionable ring weights along the lower shaft
Precision balance system: X-Y camera plate provides fore/aft adjustment for horizontal balance and sliding counterweights allow for exact vertical balance adjustment
Balancing plate (included) functions as a docking stand while balancing the FlowPod or resting it when not in use
Upgradable with either DV Sportster or Navigator arm/vest systems (see 'Related Products')
VZ-FP1 weight kit required for use with the Canon XL1/XL1s or cameras over 5 lbs (FlowPod not recommended for Canon XL2 or JVC HD100U)

$474.95

CrossFire FP Multimode Stabilizer and Tripod System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The VariZoom CrossFire FP Multimode Stabilizer and Tripod System includes the stabilizer with removable tripod and quick-release camera plate, carrying case, 2 stainless inline counterweights, 2 sliding stainless ring counterweights, microweights, and a balancing plate. You are provided with a hybrid combination of a FlowPod stabilizer and a tripod system that supports DSLR and HD video cameras.

Providing up to 6 different shooting modes, the CrossFire FP can be used as a fluid handheld stabilizer, rock-solid tripod, gliding low-mode tool, fixed low-angle mount, or full-stabilizer system. You can use the system in the tripod mode and adjust its height from 20" to 69" without having to switch between the stabilizer and tripod.

FEATURES:

The CrossFire FP and DSLRs - The CrossFire FP works brilliantly with DSLR cameras like the Canon 5D Mark II (pictured at left), as well as the popular 7D, 1D Mark IV, and Rebel T2i. The CrossFire FP handles several of your shooting needs with one tool - tall tripod, stabilizer, low-angle stabilizer, low-angle fixed mount, and it's even upgradable to a fully-supported arm/vest stabilizer system. For the still photography enthusiast, we even offer an optional 3-axis photo ball-head accessory to turn the tripod section into a professional photo tripod when it isn't being used for video.
Unrivaled Multi-Function Capability - The VariZoom CrossFire FP offers a significant advantage over all other handheld stabilizers with its tripod mode. Capable of heights up to 69" and as low as 20", the tripod mode allows you to keep shooting without having to switch between stabilizer and tripod. The ultra-light tripod legs are sturdy and compact with a built-in leveling bubble. Additionally, the tripod can be separated from the stabilizer section, allowing you to use the stabilizer in Lite Mode and use the tripod as a separate docking stand.
Arm/Vest Upgrades - Only the VariZoom CrossFire FP has the flexibility to operate in so many modes and offer multiple, affordable upgrade paths and options. One of our most popular upgrades is the DV Sportster Arm/Vest Stabilizer System for turning a handheld unit into a fully-supported dynamic system. For heavier cameras or more demanding applications, we also offer the professional Navigator system (which can also be upgraded from there).
Low-Flow and Fixed Low Modes - Only the FlowPod and CrossFire FP allow Low-Flow shots from a handheld stabilizer, and with our patented system, the camera operator is able to adjust the camera to any desired height off the ground or can even adjust to levels below the operator's feet. The advantage of the CrossFire FP over the FlowPod, however, is that the tripod is removed and doubles as a docking/balancing stand in Low Mode, allowing you to dock the unit during setup and also operate the system as a fixed low-angle, pan-capable mount only inches from the ground.

$474.95

DV Traveler Compact Support for DV Camcorders

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

VariZoom's all new DV Traveler compact, shock absorbing support is the solution for lightweight yet extremely solid camera support. The telescoping shoulder arch can extend, retract, and rotate to the videographers perfect position. This unit can also fold flat or completely remove the shoulder arch with no tools for storage or travel.

VariZoom's all new DV Traveler compact, shock absorbing support is the solution for lightweight yet extremely solid camera support. The telescoping shoulder arch can extend, retract, and rotate to the videographers perfect position. This unit can also fold flat or completely remove the shoulder arch with no tools for storage or travel. Also included is our rotating accessory mount and non-slip shoulder cushion.
The unit is made with precision and machined to the highest standards, made from soid materials to make support rock solid without any flexing. Long handgrip arms provide plenty of room for mounting a lens control.

The abdominal support is a spring-loaded suspension pod that distributes the camera weight while providing shock absorption. The support is constructed from 2 adjustable spring loaded telescopic sections designed to negate camera shakes and bounces. Adjust the horizontal position of your camera to comfortably view the LCD screen.

The suspension pod also allows smooth control over the height of your shot. Easily shoot at the eye level of your subject without uncomfortable bending at the waist. Even shoot over a crowd of people by simply raising your camera. No matter your height you will always get the right level shot.

FEATURES

Telescoping horizontal bar allowing for perfect adjustment for eyepiece and or flip out monitor
Bendable- Formable- arch adjustment
Quick release camera mount
Rotating accessory mount for lights, monitors, microphones and more
Super plush cushion shoulder pad
2 year warranty

$474.95

VariZoom Auto Rig - Car Mount for Cameras up to 25 Lbs.

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Auto Rig is the most complete and professional vehicle mount kit for DV mini Dv and HD cameras. The Auto Rig enables cinematic moving-vehicle perspectives from various angles. When not used as vehicle mount, it can also double as a high quality low-level tripod. Only VariZoom's unique swivel lock mounting system allows straps to be secured with full and even force, at nearly any angle, without twisting or distressing the straps. High quality case with multiple compartments for easy inventory of components. Custom rubber cups to absorb shock & vibration and protect vehicle surface.

The supplied harness of straps with hooks attach to the edge of a door or hood. The system can be used with most flat base tripod heads (3/8" 16 thread) or the included heavy-duty swivel head. The included ajustable swing arm makes low level and other extreme positions and angles possible. The set up is fast and easy and provides a safe, stable and rigid support for your camera. The special anti-skid, rubber suction cup feet protect the car's paint. No tools are needed for setup.

$499.95

VZ LSP Pro Shoulder Brace Camera Stabilizer for DV Camcorders

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The VZ-LSP is an incredible product that you will take pride in owning and utilizing. Assembled with over 20 individual precision-machined parts, the VZ-LSP is truly a work of art that is appreciated by professionals all over the world. Unlike many of the similar products on the market, the LSP has a genuinely refined ergonomic design based on many years of field service and customer feedback. Shoot fatigue free all day with camcorders up to 8 pounds. The VZ-LSP provides for ten adjustable fittings for an endless variety of body types. The VZ-LSP is tough, lightweight and made to last a lifetime. Add a VariZoom controller and you have a powerful acquisition tool. Guaranteed best or your money back!

FEATURES:

Shoulder and abdomen support carry the weight of the camera, eliminated stress and fatigue
Adjustments include: angle of shoulder pad, position of camcorder platform, angle of handle, length and angle of abdomen support, and angle of abdomen pad fits nearly any height or girth
Lightweight, compact folding design for great portability
Handle is compatible with all VariZoom controllers. VZ-PG-L w/ deluxe clamp allows for direct replacement of handle w/ PG-L controller

$598.45

DV Media Rig Pro Support

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The abdominal support is a spring-loaded suspension pod that distributes the camera weight while providing shock absorption. The support is constructed from 2 adjustable spring loaded telescopic sections designed to negate camera shakes and bounces. Adjust the horizontal position of your camera to comfortably view the LCD screen. The suspension pod also allows smooth control over the height of your shot. Easily shoot at the eye level of your subject without uncomfortable bending at the waist. Even shoot over a crowd of people by simply raising your camera. No matter your height you will always get the right level shot. Combining full tilt range, a highly adjustable shoulder platform and a confortable support system the DV Media Rig will add a high level of professionalism for a budget price.

FEATURES:

Lightweight Compact Design
Adjustable Rear Weight Distribution
Adjustable Shoulder Support
Full Tilt capabilities
On Board Adjustable Accessory Adapter
Non Skid Shoulder Pad
Extended Handles Allows Room for Zoom/Focus Controls
Comfort Grip Handles for Easy Control
Rapid Release Camera Plate for Quick Camera Swaps
Completely Adjustable Side to Side and Front to Back Axis
Two Stage Adjustable Shock Absorbing Support pod
Adjustable Belt with Holster

$617.45

DV Sportster Arm/Vest Stabilizer System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

For years users of handheld stabilizers have complained of arm and wrist fatigue when using their handheld for extended periods of time. The DV Sportster eliminates the stress and lets you concentrate on your shot instead of the discomfort. If you are currently using an old or new handheld you can safely buy the DV Sportster and know that it will support and improve its performance.

FEATURES:

Single articulated arm with one Flowtech spring system
Vest incorporates many adjustable points for comfort and performance
No tools necessary to assemble & operate the DVSportster vest & arm
Custom carry case included

$759.95

VZ Full Size Navigator Stabilizer for DV Camcorders

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Navigator is our professional, heavy-duty vest/arm upgrade for FlowPod and Glidecam - handheld units. It will handle the full weight range of either unit effortlessly.

Vest & Single Dynamic Arm ONLY

The ultimate vest/arm upgrade for FlowPod and Glidecam handheld stabilizers, the Navigator borrows heavily from our GT professional stabilizer system, utilizing the same vest and arm. Handheld stabilizers allow shooters to get beautiful, fluid images at a budget price, but they can cause arm and wrist fatigue when used for extended periods of time. The Navigator completely eliminates the stress and lets you concentrate on your shooting instead of your discomfort. One of the best things about the Navigator is that it can be upgraded later with a GT sled, transforming it into a bona fide professional stabilizer system.

Features

Heavy-duty single dynamic arm easily handles 10 pound cameras for the GlidecamTM 4000
NEW form-fit, torso gripping vest is lightweight and cool
System is fully equipped to work with either FlowPod or Glidecam units
Setup and operation are simple
Can be used with GT sled for later upgrade to full professional system
Optional Package - NavFPK - Navigator Kit includes vest, arm, and FlowPod Kit (FP w/ case and low-mode)

$1,329.95

Zero Gravity Rig Shoulder Support System

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Able to handle much heavier cameras than the MediaRig, the ZG Rig offers an impressive range of adjustments to fit just about any body type or shooting preference. Configurable to right or left shoulder mounts, high or low angles, and near or far mounting positions, the ZG Rig will accommodate a huge range of needs, including cutting-edge DSLR applications. The system comes with an extra-long accessory mount for monitors, lights, mics, etc.

$1,519.95

Navigator Arm and Vest with FlowPod Stabilizer - Supports 8.0 lbs

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Varizoom VZ-NAVFPK kit includes the FlowPod camera stabilizer, and the Navigator arm and vest. It is capable of supporting payloads up to 8.0 lbs (3.6 kg). The FlowPod may be used alone as a camera stabilizer when minimal bulk is needed for shooting in confined spaces. The sliding top stage helps accommodate uneven camera payloads, and the lower section extends to serve as a monopod when needed. The operator controls the stabilizer through the low-friction ball-jointed handle, which effectively isolates body movement from the camera platform. With the Navigator arm and vest connected to the FlowPod, operator comfort and fine camera control dramatically improve. This is due to the fact that the payload is suspended by the spring-loaded arm which is anchored on the vest, thereby evenly distributing the payload across the operator's shoulders and hips. As a system, the net result is that the operator is freed to concentrate on camera movement, and will be able to shoot much longer without adverse health effects.

FEATURES:

$1,614.95

Quick Plate for Bracket 1/1a

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Quick Plate is a universal accessory mounting adapter, a low cost solution for attaching your wireless receiver, hard disk recorder, or other audio accessories to the Bracket 1 bracket system or any camera with the industry standard mounting pattern. Quick Plate firmly holds the receiver against rubber pads using a Velcro type strap. Two Quick Plates can be mounted back to back on Bracket 1 HD, Bracket 1mini, and Position Plate to hold 2 wireless receivers or one receiver and one hard disk recorder.

For use with:

Bracket 1 HD, Bracket 1mini, Bracket 1a, Bracket 1c, Position Plate, Over Camera Plate

$29.95

Quick Box Big Mounting Accessory

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

With The Visual Union Quick Box Big, your wireless receiver is protected from the elements in this felt lined aluminum box. A stainless steel spring clip secures the receiver in place. Quick Boxes can be "stacked" next to each other to hold additional wireless receivers. Will fit all our Bracket 1 brackets, Over Camera Plate, Position Plate, and any professional camera set-up that uses industry standard mounting pattern.

Quick Box Big - Fits most larger wireless receivers up to 84mm wide & 35mm thick, including:

Audio Technica ATWR 100, 1800 series
Azden 1000 URX
Lectro 201 / 401 / 211 / 411
Telex ENG 100

$84.95

Quick Box Small Mounting Accessory

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

With The Visual Union Quick Box Small, your wireless receiver is protected from the elements in this felt lined aluminum box. A stainless steel spring clip secures the receiver in place. Quick Boxes can be "stacked" next to each other to hold additional wireless receivers. Will fit all our Bracket 1 brackets, Over Camera Plate, Position Plate, and any professional camera set-up that uses industry standard mounting pattern.

Quick Box Small - Fits most small wireless receivers up to 65mm wide & 27mm thick, including:

Audio Technica Pro 88 W/R
Azden 100 LT
Lectro UCR 100
Samson M 32
Sennheiser EW 100 / 500

$84.95

Bracket 1 HD for Mounting Wireless Receivers to Camcorders

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Specially designed for the new, wider body high definition cameras, the Bracket 1 HD locates your wireless receiver in the middle of the right side of the camera, for perfect balance when shooting hand-held. Constructed from ultra-light, high strength aluminum, this versatile bracket can be configured with an additional cold shoe and/or an "Over Camera Plate", allowing multiple wireless receivers, a hard disk recorder, and other accessories to be mounted simultaneously.

Compatible with:

Sony HVR-Z1U, HVR-V1U, HDR-FX1, XDCAM EX, pd 150, pd 170 and vx series
Panasonic AG-HVX200 and AG-DVX100 (DVX100 may need short XLR end)
Canon GL1 & GL2, XH A1, and XH G1 and most other small camcorders

$109.95

Zangle

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Zacuto's Zangle will give you another option in mounting your rods. With the zangle, you can attach rods at a 90 degree angle to fit your custom rigging needs as in building a cage or DSLR handle! There are two 15mm holes that accept a female end of a rod. Using an included allen key, simply loosen the allen screw to insert the rods, and tighten to get a secure hold.

$38.00

Gorilla Plate

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Gorilla Plate is used in both of Zacutos Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro. The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) 1/4 20" screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws. The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame.

Note: The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole.

$65.55

Point and Shoot Pro

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Small, lightweight, quick and portable! Zacuto's Point and Shoot is the ideal handgrip stabilization system for shooting stable, smooth professional video with any small point and shoot cameras, HD Flip and similar cameras that have a 1/4 20" thread on the bottom. Simply release the screw mount from the grip, screw onto camera, and snap back onto the handgrip for quick stable shooting in a matter of seconds. The screw mount is so small it can stay on your camera. The handgrip is also equipped with a 1/4 20" thread on the bottom so you can easily mount the system to a tripod.

$84.55

Z-ZWP Zwiss Plate

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Zacuto Z-ZWP Zwiss Plate is Zacuto's multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with Zacuto's Wireless Plate for mounting multiple wireless receivers.

You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both Anton Bauer 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding Z-Lite weights to the back of the rig along with the Zwiss Plate. Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. The Zwiss plate is also the only accessory you will ever need to mount the AJA Ki Pro Mini to your rig. With plenty of 1/4 20" and 3/8 16" holes, your mounting options are limitless.

FEATURES:

Multi-purpose Mounting Plate
2 Sets of Standard 15mm Rod Holes
Red Levers
Allows You to Add Counterbalance
Mounts Receivers onto Camera Systems
Mounts Zamerican Quick Release Arms
Can Mount AJA Ki Pro Mini Video Recorder

$141.55

Zgrip Z-Mount Zwivel

Samy's Camera — Fri, 09 Mar 2012 08:00:00 GMT

The Zgrip Z-Mount Zwivel is an articulating handgrip that comes with a black 4.5 inch rod and a Z-Mount Zwivel. It easily mounts to any 15mm rod with the quick-release handgrip. The Zwivel allows you to change the angle between the two 15mm rods. The Zwivel has one lever which controls the both 15mm holes. In order to change the angle of the rods, just loosen the single lever and the internal spring separates the parts for you to adjust to the desired angle.

$385.00

DSLR Baseplate

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The DSLR baseplate is our adjustable and expandable baseplate. It comes with a pair of 3.5" male/female rods in order to mount a follow focus and/or matte box; rod extensions may be necessary for long lenses. The baseplate mounts to your camera using a _ 20" screw. The baseplate has multiple _" 13 threads on all sides; (1) _" 13 thread on both the left and right side, (4) _" 13 threads on the front (2 on the top and 2 on the bottom) and (2) _" 13 threads on the back . The multiple 1/2" 13 threads allow you to mount rods on all sides of the baseplate allowing you to create your perfect rig. You can mount rods off the side to make a shoulder mounted rig or to build a cage. The Allen screws in the front of the baseplate adjust the height of the plate for compatibility with all DSLR cameras with and without battery grips for use with follow focuses and matte boxes.

Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws. Your tripod plate mounts to the bottom of the plate by using the standard tripod screws, (2) 1/4 20" and (1) 3/8 16".

$399.00

Target Shooter

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Target Shooter is Zacutos lightest kit. It has three points of contact by having both hands on the camera and the gunstock in your chest. The entire kit is infinitely adjustable. You can add a fourth point of contact by adding one of our Z-Finders to the kit.

The Gorilla Plate, included with the Target Shooter, attaches to the bottom of your camera using the standard tripod screw hole. The Gorilla plate has a 15mm hole in the bottom which allows you to attach the main rod for the Target Shooter. The rig can be freed from the Gorilla plate by flipping the red lever. A tripod plate can be installed on the Gorilla plate for quickly moving from handheld to tripod by.

Note: The Target Shooter can not accommodate a follow focus or matte box as it does not have a baseplate. Once you add more weight to the front of the camera, such as a follow focus and matte box, we recommend going to our Cinema DSLR Kits that have a shoulder pad and counterbalance weight to properly balance the rig.

$450.00

Striker

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Striker is light and easy to handle. It has three points of contact by having one hand on the handgrip, the gunstock in your chest and your focusing hand on the lens. The entire kit is infinitely adjustable. You can add a fourth point of contact by adding one of our Z-Finders to the kit.

The Zacuto Gorilla plate attaches to the bottom of your camera using the standard tripod screw hole. The Gorilla plate has a 15mm hole in the bottom which allows you to attach the main rod for the Striker rig. The rig can be freed from the Gorilla plate by flipping the red lever. A tripod plate can be installed on the Gorilla plate for quickly moving from handheld to tripod.

Note: The Striker kit can not accommodate a follow focus or matte box as it does not have a baseplate. Once you add more weight to the front of the camera, such as a follow focus and matte box, we recommend going to our Cinema DSLR Kits which have a shoulder pad and counterbalance weight to properly balance the rig.

$810.00

Fast Draw

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Fast Draw is a shoulder mounted handheld system that uses Zacutos DSLR baseplate. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) _ 20" and (1) 3/8 16". Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.

The Fast Draw uses Zacutos shoulder pad and 7lb. counter balance weight so you have a fully balanced rig. A fully balanced rig lessens fatigue as you will not be fighting the front heaviness of the rig. The rig can be configured for use on the left or right shoulder. It uses a single handgrip with the Z-mount Zwivel which allows you to change the vertical angle of handgrip. The handgrip can also be used on the right or left side independent of the shoulder pad position. The handgrip uses a ball joint so you can rotate the handgrip 180 degrees for user comfort.

$1,395.00

Single Action

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Single Action kit is a tripod only kit with a follow focus unit but can easily be upgraded to a shoulder mounted rig. This kit works on any DSLR camera with or without battery grips as it is highly adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) 1/4 20" and (1) 3/8 16". Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.

The .8 pitch Zipgear Universal fits one lens by cutting the strand to fit your lens and connecting the strand together by using the included housing and allen key. The follow focus slides on the rods and the follow focus gear makes contact with the Zipgear allowing you to pull focus. If you require the use of other lenses with the follow focus, you must purchase additional ZipGears for each lens.

$1,467.00

Cross Fire

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Cross Fire is a unique kit as it is the Single Action kit and Striker kit combined. The Cross Fire uses the expandable DSLR baseplate so this kit can easily be upgraded from a simple point of contact kit like the Striker Kit to a full shoulder mounted system like the Fast Draw. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) _ 20" and (1) 3/8 16". Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro, DSLR optical viewfinder, by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.

The .8 pitch Zipgear Universal fits one lens by cutting the strand to fit your lens and connecting the strand together by using the included housing and allen key. The follow focus slides on to the rods and the follow focus gear makes contact with the Zipgear allowing you to pull focus. If you require the use of other lenses with the follow focus, you must purchase additional ZipGears for each lens.

$2,137.50

Z-STG Stinger Rig

Samy's Camera — Wed, 26 Oct 2011 07:00:00 GMT

The Stinger rig is Zacutos solution to DSLR shoulder mounted shooting with an EVF or small on-board monitor. This rig uses the height adjustable DSLR Baseplate to mount to any DSLR and tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20" and (1) 3/8 16". You can also easily quick release your camera from the rig by turning the red knob on the baseplate and pulling up on your camera. This cool feature allows you to quickly switch between using the camera on its own or as part of your rig.

This system includes our shoulder pad and Z-Lite 7 lb counterbalance weight for a fully balanced in-line rig. The more balanced the rig, the less front heaviness and arm fatigue. You can slide the counterbalance weight forward and backward on the rods for custom comfort. This rig can be used on your left or right shoulder. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using our EVF Standard Mount Kit or EVF Tri Mount Kit. These kits attach to the side of the DSLR Baseplate included with the Stinger and allow you to have your eye positioned comfortably in front of the EVF or monitor. This rig comes with our DSLR Handle, great for low mode shooting and easy carrying.

The Stinger also includes our Z-Focus follow focus and ZipGear Prime Lens Kit (set of 4 lens gears) so you can achieve precise and accurate focus with your DSLR. The .8 pitch ZipGear Universal fits one lens by cutting the strand to fit your lens and connecting the strand using the included housing unit and allen key. The follow focus then slides onto the rods and makes contact with the ZipGear allowing you to pull focus. If you are using more than one lens, you must purchase additional ZipGears for each lens.

$2,835.00

Varizoom Mini Zoom Control for Panasonic DVX100(A), DVC-80, -60, -30

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Specifically designed for Panasonic cameras, the affordable and versatile Stealth DVX has a unique variable-speed throttle for controlling zooms from the slowest crawl up to the fastest. Works on all camera supports, stabilizers, tripods, & jibs.
A stylish, lightweight body houses our pressure-sensitive 'throttle' control, which allows you to ease into zooms in either direction, hold a steady speed, or instantly accelerate into a 'crash' zoom. The StealthDVX is completely intuitive and smooth, requiring no setup, power, or operator skill. This unique miniature control offers unmatched convenience, value, and performance.

FEATURES:

Throttle provides variable- speed zoom control
Low profile record/pause button

$142.45

Phantom Replacement Propeller Set

Samy's Camera — Tue, 26 Mar 2013 07:00:00 GMT

The DJI Innovations Phantom Replacement Propeller Set is replacement set of Phantom. The propellers are made with state of the art design and material to meet the requirement of ultra stable flight for shooting.

Note: Kit comes with 2 propellers only.

$4.99

Smoothee-GPIP4 for iPhone 4/4S and GoPro HD Hero

Samy's Camera — Thu, 15 Nov 2012 08:00:00 GMT

The Steadicam Smoothee-GPIP4 for iPhone 4/4S and GoPro HD Hero is designed to work with your Apple iPhone 4/4S. It allows iPhone 4 owners to capture incredible video without the shakes normally associated with hand-held video shot on the go, right out of the box, the very first time. The Smoothee can be used with the Apple iPhone 4.

While designed for the Apple i-Phone 4, the patented quick release removable i-Phone mount also serves as a tabletop stand or can be mounted to any tripod with a standard 1/4x20" camera mount. The comfortable ergonomic hand-grip folds up securely when not in use. The lightweight, compact, agile, and easy to use Steadicam Smoothee features an innovative, patented design built around a durable mono-frame metal structure that requires no complicated instruction to use.

Features:

The lightweight, compact, agile, and easy to use Steadicam Smoothee features an innovative, patented design built around a durable mono-frame metal structure that requires no complicated instruction to use
Operate one of three ways: With two hands, with one hand and just the thumb at the guide ring, and with one hand and both the thumb and index finger on the guide ring
Patented quick-release removable mount also serves as a tabletop stand
Belt clip included
Comfortable ergonomic handgrip folds up securely when not in use

$149.95