Hard Cases & Large Equipment Bags

Pro Roller x100 (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pro Roller x-Series is a hardworking mobile studio-with a few inventive surprises built into its modern design. Airport-friendly and super-secure, it holds a notebook, and is filled with refined yet practical features, such as the Reserve Pack, a camera backpack that zips out of the hard case when a photographer needs to downsize.

$319.95

Pro Roller x200 Mobile Studio (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Pro Roller x300 Mobile Studio (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1560 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1560 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, two easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded top and side handles, retractable pull extension handle and built-in wheels.

$157.46

1490 Attache/Computer Case with Foam for Laptop Computer up to 17" - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1490 Attache/Computer Case is a watertight, dustproof and corrosion proof case with a slim attach design and offers total protection for your equipment. It is carried by a padded fold down handle, and an optional removable padded ergonomic shoulder strap.

Three piece foam set is included with this case.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
3 Piece replacement foam set that consists of one "egg crate" foam upper section, one Pick N' Pluck foam section and one 1" blank bottom foam section.
Built-in purge valve for changes in altitude or temperature
Meets IP 57 standards
Temperature Rating -10 degrees to Plus 210 degrees
Compatible with; Laptop computer up to 17" long x 2 5/8" deep

$109.95

1200 Watertight Hard Case - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1200 Small Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.

The Pelican 1200 case is NATO codified and tested to IP-67 (Ingress Protection).

A 3 piece 1.7 lb. Polyurethane foam set is included.

Key Features

A 3 Piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam section and one 1" thick blank bottom foam section is included.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$38.95

1300 Mini-D Watertight Hard Case - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1300 Protector Case with Foam Interior is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.

The Pelican 1300 case is NATO codified and tested to IP-67 (Ingress Protection).

4 Piece replacement foam set is included with this case.

Key Features

4 Piece replacement foam set that consists of one 'egg crate" foam upper section, two Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$44.95

1300 Mini-D Watertight Hard Case - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

4 Piece replacement foam set that consists of one 'egg crate" foam upper section, two Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$44.95

1400 Medium Watertight Hard Case - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1400 Protector Case with Foam Interior is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).

The Pelican 1400 case NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association).

Three piece foam set is included with this case.

Key Features

3 Piece foam set that consists of one "egg crate" foam upper section, one Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Meets ATA Specification 300 for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$74.95

1400 Medium Watertight Hard Case - Yellow

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3 Piece foam set that consists of one "egg crate" foam upper section, one Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Meets ATA Specification 300 for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$74.95

1450 Medium Watertight Hard Case - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1450 Protector Case with Foam Interior is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).

The Pelican 1450 case NATO-codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).

Three piece foam set is included with this case.

Key Features

3 Piece replacement foam set that consists of one "egg crate' foam upper section, one Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$81.95

1450 Medium Watertight Hard Case - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3 Piece replacement foam set that consists of one "egg crate' foam upper section, one Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$81.95

1450 Medium Watertight Hard Case - Yellow

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3 Piece replacement foam set that consists of one "egg crate' foam upper section, one Pick N' Pluck foam section and one 1" blank bottom foam section.
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$81.95

1500 Watertight Hard Case with Foam Insert - Orange

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1500 Medium Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1500 case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). A three piece foam insert set is included.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 3 piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and iP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$99.95

1500 Watertight Hard Case with Foam Insert - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 3 piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and iP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$99.95

1500 Watertight Hard Case with Foam insert - Yellow

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 3 piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and iP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$99.95

1500 Watertight Hard Case - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 3 piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and iP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$107.95

1520 Watertight Hard Case with Foam insert - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1520 Medium Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost). A three piece foam insert set is included.

The 1520 case is NATO-codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).

Key Features

Includes a 3 piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam section and one 1" blank bottom foam section
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$108.95

1520 Watertight Hard Case with Foam insert - Orange

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

$108.99

1520 Watertight Hard Case with Foam insert - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Includes a 3 piece foam set that consists of one "egg crate" foam upper section, one Pick 'N Pluck foam section and one 1" blank bottom foam section
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$108.99

1550 Pro Watertight Hard Case - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1550 Large Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1550 case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). A four piece foam insert set is included.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 4 piece foam set that consists of one "egg crate" foam upper section, two Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and iP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$122.94

1550 Pro Watertight Hard Case - Silver

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 4 piece foam set that consists of one 'egg crate" foam upper section, two Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$122.94

1520 Watertight Hard Case with Padded Dividers - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1524 Medium Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A fifteen piece padded and flexible divider set is included.

The 1524 case is NATO-codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 15 piece padded divider set consisting of 1 tray, 4 long, 10 short padded and flexible dividers.
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
Temperature Rating -10 degrees to Plus 210 degrees

$144.95

1600 Watertight King Hard Case - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1600 Large Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1600 case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). A four piece foam insert set is included.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 4 piece foam set that consists of one "egg crate" foam upper section, two Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and iP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$144.99

1600B Watertight King Hard Case with Padded Dividers - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1604 Large Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1604 case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). A fifteen piece padded and flexible divider set is included.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a 15 piece padded divider set consisting of 1 tray, 2 long, 2 medium and 10 short padded and flexible dividers.
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
Meets ATA specifications for transit cases
Temperature Rating -10 degrees to Plus 210 degrees

$196.95

PB-2400F Safeguard Field Production Vault Case (Blue)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The PB-2400F Safeguard Field Production Vault (Blue) is a watertight, high-performance hard resin case for video, audio, and photographic equipment transportation and protection. It comes standard with a hard carrying handle.

$73.78

CC28 Car Case with 3 Moveable Dividers Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Perfect to organize and protect your gear when transported by car or hand. Lighter construction, less expensive than our Air Cases. Holds two Dynalite Packs and three to four heads or Noman 1212 or three Speedotron heads or three Elinchromes 1000-14, or two Powerlights, stands and umbrellas. Three moveable dividers.

$250.00

TP-1141WH Tuffpak Tripod Case with Wheels

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tuffpak is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak but it's worth it! The Tuffpak comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case. Key locks can be added as an accessory. The rotational molding process used to form every Tuffpak enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Every corner in a Tuffpak has 20% more material than the sidewalls. All of this yields a case so "tuff" that Nalpak stands behind every one of them with their "Guaranteed For Life" guarantee. Tuffpak is resistant to: jet fuel, solvents, moisture, dents, abrasions, shock, cold to -40 degree F and heat to +140 degree F. Some Tuffpak models come equipped with wheels which are permanently attached and protected by "fenders" that are molded into the bottom of the case. No need to remove them (and possibly lose them) or find a place for them in your other bags. The wheels along with the pull handle on the lid make it a snap to move even a heavy load.

$384.95

TP-1461WH Tuffpak Tripod Case with Wheels

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1510 Watertight Hard Case Carry On - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1510 Watertight Hard Case Carry On - Black is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. It has a hinged case with double ABS latches that seal perfectly and padlock protectors that provide added strength and extra security against cutting and theft.

$149.95

1610 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1610 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1610 comes with a side handle, front handle and an extension handle. It has an effortless release latch for the extension handle. The padlock protectors provide added strength and extra security against cutting and theft. A five piece foam insert set is included.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Includes a 5 piece foam set that consists of one "egg crate" foam upper section, three Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
Temperature Rating -10 degrees to Plus 210 degrees
Built in dolly with 2" (5 cm) hard rubber transport wheels
Side, top and retractable handles.
Padlock protectors provide added strength and extra security against cutting and theft.

$187.99

1620 Watertight Hard Case with Foam Inserts and Wheels

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1620 Large Protector Case with Black Dolly is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1620 comes with a side handle, front handle and an extension handle. It has an effortless release latch for the extension handle. The padlock protectors provide added strength and extra security against cutting and theft.A six piece foam insert set is included.

The 1620 case is NATO-codified and tested to MIL C-4150J (Military Standard).

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Includes a 6 piece foam set that consists of one "egg crate" foam upper section, four Pick 'N Pluck foam sections and one 1" blank bottom foam section
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard)
Temperature Rating -10 degrees to Plus 210 degrees
Built in dolly with 2" (5 cm) hard rubber transport wheels
Side, top and retractable handles
Padlock protectors provide added strength and extra security against cutting and theft.

$199.95

1650B Watertight Hard Case with Foam Inserts and Wheels - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1650 Large Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost). A four piece foam insert set is included.

The 1650 comes with a fold down main handle, large side trunk handles and a 7" extension handle. The case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association).

Key Features

Includes a 4 piece foam set that consists of one 'egg crate' foam upper section, two Pick 'N Pluck foam section and one 1" blank bottom foam section
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard)
Temperature Rating -10 degrees to Plus 210 degrees
2" (5 cm) hard super heavy duty quad wheels
Fold down main handle
Large side trunk handles
7" retractable handle
Padlock protectors provide added strength and extra security against cutting and theft.

$218.99

1614 Waterproof 1610 Case with Dividers (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1614 Waterproof 1610 Case with Dividers is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by 3 comfortable rubber over-molded haul handles, a retractable handle and built-in wheels.

$239.95

RSV Wheeled Upright Camera - Computer Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican PCS-247 RSV Wheeled Upright Camera/Computer Case is designed for the busy digital professional who requires a case that is reliable, strong, and versatile. It is made of water resistant 1680 denier ballistic nylon material with full grain leather trim. It has a main compartment with a removable dividable tray and a fully padded computer pocket. There is a front organizer pocket with AA battery organizer and gusseted PVC lined inside mesh pockets.

The PCS-247 is carried by a leather side grip handle, a leather top grip handle and a recessed, locking telescoping handle with inline ball bearing skate wheels. There are removable tripod straps with catch pocket for the tripod legs. A Nylon storm cover with Pelican logo in reflective paint is included.

Features

Water resistant 1680D ballistic nylon with full grain leather trim camera/computer case

Molded protective corners in high wear areas

$249.95

1660 Watertight Jumbo Hard Case with Foam Inserts and Wheels - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

$284.95

1650B Watertight Hard Case with Padded Dividers and Wheels - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

$291.95

1620 Rolling Hard Case Padded Dividers, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Includes a 6 piece foam set that consists of one "egg crate" foam upper section, four Pick 'N Pluck foam sections and one 1" blank bottom foam section
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard)
Temperature Rating -10 degrees to Plus 210 degrees
Built in dolly with 2" (5 cm) hard rubber transport wheels
Side, top and retractable handles
Padlock protectors provide added strength and extra security against cutting and theft.

$327.50

SpeedRoller 1x Big Wheels Rolling Digital Camera and Computer Case (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

For Photographers on the go, these rolling photo and laptop cases are designed to protect and carry heavy camera gear and a laptop across diverse terrain. Big Wheels SpeedRollers - These ballistic nylon outer shell and rigid, plastic-armored wall cases are extremely tough and protective. Windowpane Mesh pockets inside the lids organize accessories. Foam-padded outer pockets protect laptops. The oversized wheels offer excellent mobility and the ability to negotiate imperfect surfaces. The QuickClip Tripod Attachment System allows a tripod to be securely carried.

$374.95

SpeedRoller 2x Big Wheels Rolling Case (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The SpeedRoller 2x is spacious and will hold two DSLRs with lenses attached as well as 4-6 additional lenses. And since most photographers don't travel without a laptop these days, it will also hold your 17.3' (43.9cm) laptop in its own padded compartment. It's Windowpane-Mesh pockets, located inside the main lid, will hold small items such as extra batteries, memory cards, filters and the like. Take your tripod along using the QuickClip attachment system. It is secured, centered and balanced on the front of the SpeedRoller.

$399.95

694 Big-Wheels Rolling Strongbox Camera Case LP4, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

For photographers who are not concerned with airline carry-on restrictions and need to carry more cameras, lenses and accessories than will fit in the Model 692, the Big Wheels Rolling StrongBox 694 is the answer. It puts the weight of a huge amount of camera equipment on wheels without sacrificing excellent protection. This case has two zippered front pockets, one of which is foam-padded for notebook computers up to 12.75 x 10.5 x 2", Modular Accessory System (M.A.S.) attachment slots and RollerProp compatibility. This case is also excellent when used in conjunction with one of Tamrac's camera bags equipped with a Piggy-Back Pocket.

Made the same as the normal StrongBox series of shipping cases, the Big Wheels Rolling StrongBoxes feature an industrial strength telescoping handle, reinforced rail guards and fantastic wide wheels which let you wander over rougher terrain. A seamless protective tub made of ABS plastic protects the insides from the outside. Use the well-padded dividers and Touch Fastener to customize the interior to match the equipment. Inside the top are Windowpane mesh pockets to hold filters and accessories in easy reach. Outside construction is of waterproof Dupont ballistic nylon. Zippers are self healing nylon coil and the main compartment can be secured with the included Tamrac lock. Sturdy leather-wrapped carrying handles provide easy transportation when you must carry your own load.

Features

Holds a huge amount of camera equipment on wheels
Foam-padded front pocket for notebook computers up to 12.75 x 10.5 x 2"
Telescoping handle, reinforced rail guards and fantastic wide wheels
ABS plastic and waterproof Dupont ballistic nylon

$522.95

Airport International Rolling Camera Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The ThinkTank Airport International rolling camera case is thoughtfully designed for the international traveler to take the maximum amount of gear possible as legal carry-on baggage. The smooth-rolling wheels get you quickly through the airport, while a security cable and lock insure that your gear will stay with you. Interior and front-pocket organizers make this case business friendly, as well.

Features:

International carry-on size
Security combination lock
Security cable
Holds 300 f/2.8 and other large lenses
Inside organizer
Replaceable wheels
Front stretch pocket
Business card holder/top pocket
Bottom handle
Front pocket organizer

Compatible with the optional AI Low Divider Set and the Artificial Intelligence 15” and 17” laptop cases.

Includes seam-sealed rain cover.

$369.75

MBAG70N Unpadded Tripod Bag

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Manfrotto MBAG70N Tripod Bag is an unpadded ballistic nylon bag designed to carry Manfrotto tripods with head up to 27" long. The end cap is padded to offer protection to the tripod head. The zipper extends down the length of the bag, but also fully opens the top end of the bag. The end opening allows for faster "quiver" style extraction and insertion of the tripod.

$35.99

MBAG80N Unpadded Tripod Bag

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Manfrotto MBAG80N Tripod Bag is an unpadded ballistic nylon bag designed to carry Manfrotto tripods with head up to 31" long. The end cap is padded to offer protection to the tripod head. The zipper extends down the length of the bag, but also fully opens the top end of the bag. The end opening allows for faster "quiver" style extraction and insertion of the tripod.

$52.19

MBAG80PN Padded Tripod Bag

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Manfrotto MBAG80PN Padded Tripod Bag is a padded ballistic nylon bag designed to carry Manfrotto tripod with a head up to 31" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried. The zipper extends down the length of the bag, but also fully opens the top end of the bag. The end opening allows for faster "quiver" style extraction and insertion of the tripod. The inner pocket holds accessories (such as video head pan bars). The bag is tapered to follow the shape of the tripod and head.

$78.29

MBAG100PN Padded Tripod Bag

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Manfrotto MBAG100PN Padded Tripod Bag is a padded ballistic nylon bag designed to carry a Manfrotto tripod with a head up to 39" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried. The zipper extends down the length of the bag, but also fully opens the top end of the bag. The end opening allows for faster "quiver" style extraction and insertion of the tripod. The inner pocket holds accessories (such as video head pan bars). The bag is tapered to follow the shape of the tripod and head.

$112.49

TP-0950 Tuffpak Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Deluxe Tripod Bag (Small)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Promaster Deluxe Tripod Bag is made of heavy duty cordura nylon and built to stand up to the rigors of traveling with your tripod. Its secure flap closure allows for quick retrieval and storage of your tripod while the handy exterior pouch is perfect for smaller accessories.

$19.95

Deluxe Tripod Bag (Medium)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Deluxe Tripod Bag (Large)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Deluxe Tripod Bag (Extra Large)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

324 Tripod Bag Medium, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tamrac 324 Tripod Bag is designed for tripods up to 25 inches when folded. It features zippered exterior pocket for accessories. It is constructed from waterproofed material.

$43.95

326 Tripod Bag Large, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1.5-5x20 Meostar R1 has a 30mm maintube diameter, with its reticle placed in the rear focal plane (in front of the eyepiece) to maintain its virtual size throughout the entire magnification range. Targeting smaller game at longer distances is quite easy with the reticle location in the rear focall plane.

The 1.5-5x20 Meostar R1 is best suited to rimfire and small/short-distance target/varmint shooting applications, with an extremely broad range of viewing angles spanning from 4.5-15.5°.

Features

The Meostar Finish Advantage The supreme 1.5-5x20 Meostar R1 riflescope has an aircraft aluminum alloy construction and a bead blasted exterior, as well as an "Elox" andonizing process, which ensure an extremely durable and non-reflective black matte outer finish.
Meostar's Magnificent Multicoatings Meopta has dramatically improved their light transmission per glass surface with a proprietary IMB-5501 anti reflective coatings & ION assisted applications process. Light transmission is staggeringly high at 99.8% per surface!
Two-piece 30mm internal diameter tube
±3 Dioptric correction
Soft rubber eyecup prevents injury from recoil power
Extremely compact and lightweight instrument

$54.95

327 Tripod Bag XL, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tamrac 327 Tripod Bag can accommodate tripods up to 39" when folded. The zippered exterior pocket can hold cable releases and other accessories. Made of waterproofed PowerGrid Cordura.

$56.95

328 Professional Location Bag, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This professional light stand and tripod carrying system is foam padded and has internal Cordura pockets to keep the equipment organized.

$147.95

48" Rolling Tripod Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Rolling Tripod Case is available in 48-inch length. Each case in hand-built in Tenba's Brooklyn, NY factory to provide the best protection available. Custom-made, air-channeld ABS walls and ballstic nylon exterior ensure amazing durability, and heavy-duty, ball bearing wheel assemblies make it easy to move heavy tripods and stands.

$330.00

Case for Softube 400

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

A lightweight telescoping tarvel case for the Softube.

$133.00

1010 Micro Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1010 micro cases has the legendary strength as the normal sizes pelican cases. This mini case is great for protecting small electronic devices and other valuables. It's interior space measures 4.3 x 2.8 x 1.6 in. leaving space for a cell phone, camera, MP3 player or other small electronic device.

$9.49

1010 Micro Case (Clear Blue)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1010 Micro Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1020 Micro Hard Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

A water-resistant, crushproof, and dust-proof case made to carry small valuable items. It is made of copolymer, which makes it extremely strong and durable. It has a rubber liner for extra protection, which doubles as an o-ring seal. The case has an Automatic Pressure Equalization Valve that balances interior pressure and keeps water out. Includes lanyard to carry the case.

$11.95

1020 Micro Hard Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1020 Micro Hard Case (Clear Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1040 Micro Hard Case (Clear Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1040 Micro Hard Case (Clear Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1040 Micro Hard Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1050 Watertight Micro Hard Case (Clear Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Micro Case Series you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Micro Cases will totally protect your valuables, as they are watertight, crushproof and have an automatic pressure purge valve. Every Micro case is available in solid color or clear with matching liner and speed lock. They include a ring and a lanyard for easy attachment.

$14.39

1120 Case with Foam (Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1120 Case with Foam (Yellow) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a large handle that enables a person to use two hands for heavy loads.

$24.95

PC1120FBL Watertight Hard Case with Foam Insert (Blue)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This Pelican Case is unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. The cases are made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has an exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.

$24.95

1150 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1150 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a large handle that enables a person to use two hands for heavy loads.

$26.95

1150 Case with Foam (Yellow)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1150 Case with Foam (Yellow) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a large handle that enables a person to use two hands for heavy loads.

$26.95

1200 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1200 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by an oversized handle that enables a person to use two hands for heavy loads.

$38.95

1400 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1400 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and easy-open double throw latches that seal perfectly. It includes an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. It is carried by a folding molded handle.

$74.95

1430 Toploader Watertight Hard Case with Foam Insert (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1430 Case is unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. It is made of Ultra High impact structural copolymer that makes it extremely strong and durable. It's exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the care for total subjection and protection against impact, vibration or shock.

$84.95

1450 Medium Watertight Hard Case with Padded Dividers (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1450 camera case offers an interior storage area of 14.62" x 10.18" x 6.00". This case comes complete with an 8 piece padded divider set that allows you to configure and organize small and large items within the case. This divider set is made from ballistic nylon and are padded and flexible. Velcro fastener on the edges that are used to attach the dividers to the tray or other dividers.

$119.95

1500 Case Dividers (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

This 1500 Case Dividers (Black) includes a multi-layer lid organizer with a clear cover and numerous clear pockets, made to find everything right away. The lid organizer cover has touch fastener closures, to keep supplies in place during transport, and the case includes padded dividers with adjustable walls for customizing compartments to any size.

FEATURES:

Watertight, crushproof, and dust proof
Easy open Double Throw latches
Open cell core with solid wall design - strong, light weight
O-ring seal
Automatic Pressure Equalization Valve
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors
Pick N Pluck with convoluted lid foam

$125.69

1600 Watertight Hard Case with Foam Insert - Silver (Grey)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1600 Watertight Hard Case with Foam insert - Silver (Grey) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs protection and organization. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded handle.

Features:

It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable.
Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
Watertight, crushproof, and dust proof
Floats in salt water with 55 lbs (25 kg) load
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve
O-ring seal
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors

$144.99

1600 Watertight Hard Case with Foam insert - Yellow

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1600 Watertight Hard Case with Foam insert - Yellow is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs protection and organization. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded handle.

Features:

It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable.
Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
Watertight, crushproof, and dust proof
Floats in salt water with 55 lbs (25 kg) load
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve
O-ring seal
Comfortable rubber over-molded handle
Stainless steel hardware and padlock protectors

$144.99

1640 Transport Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The 1640 Transport Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.

$253.12

Transpac Single Kit Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Transpac Single Kit Case is the perfect choice for transporting small location lighting kits. The case has a rugged exterior combined with a protective interior-offering durability and safety in one piece. This case is customizable for a variety of configurations. The Transpac Single Kit Case has a 1 year warranty.

Features & Benefits:

600-denier proprietary DuraCloth(tm) & rigid wall of lightweight corrugated polymer

Double-stitched taped seams

Bolt and locking nut through-wall hardware assembly

Corners and rails are made of high-impact shock-absorbing lightweight polymer

Can be wheeled or carried

Non-scuff clear urethane inline skate wheels

Large #10 coil zippers with high visibility red pull-tabs

Six adjustable polymer reinforced Velcro

$193.95

Transpac Dual Kit Lighting Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Photoflex Transpac Dual Kit Case has enough room to accommodate two lighting setups. The case features rigid exterior walls to help protect the case contents, and the interior can be configured to your liking. Inline-style wheels provide smooth rolling for this well-built case, which features durable handles, a heavy-duty zipper and double-sewn construction.

Case interior dimensions are 46L x 10.5W x 10.5H”.

Features:

Rigid exterior walls
Inline-style wheels
Hard plastic leg supports
Durable handles
Heavy-duty zipper
Double sewn-construction
Movable interior panels for custom configurations
20 lbs.

$247.95

Air Case for Profoto Pro 7 Power Pack with 2 Heads

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

All cases for Profoto lighting gear feature Tenba's patented Air Case construction

$439.00

AW-MLC Medium Wheeled Lighting Air Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba AW-MLC Medium Wheeled Lighting Air Case features Tenba’s patented Air Cas construction, comprising a multi-layered skeleton of air-channeled plastic panels, high-density foam, and specially-molded framing components, with a heavily reinforced ballistic nylon outer shell, providing the protection of a hard-sided case at a fraction of the weight. Air Cases are strong enough to stand on, even when empty, and are built to meet or exceed ATA shipping standards. Case includes adjustable dividers that can be trimmed by the user to customize the interior.

Capacity: Large lighting systems - 1 pack and 2 heads, or 3 heads, or similar setups

$618.00

RS-G5W Roadshow ATA Air Case with Wheels for Apple G5 Tower Computer

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba RS-G5W Roadshow Air Case with wheels is designed to be an ATA, shippable, checkable transport case for the Apple G5 tower computer, keyboard mouse and cables. The case uses the Tenba Air Case construction, which provides maximum protection at a fraction of the weight of molded plastic, fiber, or other hard-sided cases. Roadshow cases are strong enough to stand on, even when empty. The RS-G5W also features a heavy-duty wheel system, for even better flexibility and easier transportation.

Features

Air Case construction comprises air channel polyethylene walls, high-density cross-linked foam padding, and molded styrene rim.
Meets or exceeds ATA shipping standards.
1050 denier Protek Ballistic Nylon exterior resists abrasion, puncture, moisture and dirt and soft, brushed Tricot interior lining cradles your cargo in cushy, scratch-free comfort. Equipment slides in and out smoothly and safely.
Massively reinforced seams and stress points, welded steel D-rings add to the overall equipment protection.
Lockable YKK #10 zippers, seatbelt-grade nylon webbing are used to close the case.
Padded hand grips to carry the case.
Heavy-duty wheel system with a retractable handle, for more flexibility and easier transportation

$675.00

8ft Telescoping Lamp Ship Case

Samy's Camera — Mon, 03 Sep 2012 07:00:00 GMT

The Kino Flo 8ft Telescoping Lamp Ship Case is hard and highly safe carrying case for most delicate lightening equipment of 8 ft size. It can accommodate most of the light kit items for safe transportation over long distances.

$395.00

iSeries GoPro Camera Case

Samy's Camera — Mon, 20 Aug 2012 07:00:00 GMT

The SKB Cases iSeries GoPro Camera Case is a military-standard waterproof hard case was specifically designed for the GoPro Cameras. The interior is custom cut ELE foam that includes pockets for the camera, memory cards and other accessories.

Fits all models of GoPro Cameras. Includes GoPro Hero Naked, GoPro Helmet Hero, GoPro Surf Hero, GoPro Motorsports Hero. Not only does the SKB GoPro Camera Case provide the ultimate protection for your GoPro camera, it is backed by SKB’s unsurpassed no-fault Million Mile Guaranty™ (Lifetime Warranty).

Features:

Ultra high-strength polypropylene copolymer resin
UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
Resistant to corrosion and impact damage
Continuous molded-in hinge
Patent pending "trigger release" latch system
Rubber over-molded cushion grip handle
Layers of cubed foam for customization
Locking loops for a customer supplied lock

About our iSeries
SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

$59.99

i-Series for Canon C300

Samy's Camera — Tue, 08 Jan 2013 08:00:00 GMT

SKB has expanded their military-standard waterproof hard cases with custom interiors to accommodate the ever expanding pro audio video markets. The interior is custom cut PE foam designed for the Canon C300 Video camera, lens and accessories. The SKB Cases i-Series for Canon C300 are custom waterproof video case backed by SKB’s unsurpassed no-fault Million Mile Guaranty.

SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

Features:

Custom interor for Canon C300 Video Camera, Lens and accessories
Ultra high-strength polypropylene copolymer resin
UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
Resistant to corrosion and impact damage
Molded-in hinge
Patented "trigger release" latch system
Rubber over-molded cushion grip handle
Convenient Pull handle
Easy glide wheels
Custom cut Canon C300 foam interior
Locking loops for a customer supplied lock

$359.99

AC-P7D Air Case Divider for Profoto Pro-7b/B2 Generator with 2 Batteries (Black)

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The AC-P7D Air Case Divider for Profoto Pro-7b/B2 Generator with 2 Batteries (Black) from Tenba is a made to be used with the Tenba Air Cases for Profoto series when using the Profoto 7b or 7B2 generator with 2 batteries.

Divider allows the case to holder the generator with 2 batteries.

Compatible

Tenba AC-P7P, AC-P7H or AC-P71 Air Case

$20.95

AMRE 2700F Hard Case with Cubed Foam Interior (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

HPRC are premium Italian designed cases that give you the confidence to send your equipment into even the most severe conditions. That’s because HPRC shells are injection molded using an advanced patented plastic that creates a light- weight high-strength barrier between your protected items and the outside elements. HPRC protection meets ATA 300 specifications for transit cases as well as rigorous standards for military use (STANAG 4280, DS 81-41, IP67).

FEATURES:

The Cubed Foam option is the base configuration and allows for self-customized total protection.
Injection molded shell
Self-customizable cubed foam interior
Neoprene O-ring to keep the case air and watertight
Meets or exceeds specifications from ATA 300, IP67, STANAG 4280 and DS 81-41
Temperature Rating of -32 to +176 F
Air pressure release valve included
Super-soft grip rigid handle

$112.95

Small Rag Bag (Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Made from Nylon Pack Cloth with a Cordura bottom, these bags are ideal for storing Butterfly and Overhead Rags individually to keep them clean and not allow one wet rag to contaminate the others. The double draw strings pull through grommets for long wear.

$23.95

Medium Rag Bag (Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Large Rag Bag (Red)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT