Cases - Rolling Equipment Cases

Pro Roller Lite 250AW (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pro Roller Lite AW series offers a light and lean solution for photojournalists who carry a pro camera set-up, plus laptop, as they travel. Each is sized below standard international carry-on requirements (less than 45 linear inches or 114.3 centimeters). Convenient features include: ProTech Trolley System , premium wheels and an All Weather AW Cover.

FEATURES:

Fully adjustable, padded main compartment fits a variety of pro-sized gear
Purpose-built, protective storage for 11" (27.9 cm) laptop
Side handles
Front storage pocket
Premium YKK zippers with self-locking option (lock not included)
ProTech Trolley System features angled telescoping handle to provide more depth in main compartment
Premium wheels are replaceable with an Allen wrench (sold separately)
All Weather cover

$289.95

TP-1141WH Tuffpak Tripod Case with Wheels

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tuffpak is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak but it's worth it! The Tuffpak comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case. Key locks can be added as an accessory. The rotational molding process used to form every Tuffpak enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Every corner in a Tuffpak has 20% more material than the sidewalls. All of this yields a case so "tuff" that Nalpak stands behind every one of them with their "Guaranteed For Life" guarantee. Tuffpak is resistant to: jet fuel, solvents, moisture, dents, abrasions, shock, cold to -40 degree F and heat to +140 degree F. Some Tuffpak models come equipped with wheels which are permanently attached and protected by "fenders" that are molded into the bottom of the case. No need to remove them (and possibly lose them) or find a place for them in your other bags. The wheels along with the pull handle on the lid make it a snap to move even a heavy load.

$384.95

12 In. Tuffpak Series Hard Tripod Case with Wheels

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The Nalpak's 12 In. Tuffpak Series Hard Tripod Case with Wheels is rotationally molded from high-density cross-link polyethylene. It takes over an hour to mold a Tuffpak™ . . . but it's worth it! This is the most durable tripod case available today.

The Tuffpak Tripod Case comes with 2" of foam in the lid and base to protect your valuable equipment. The model number of each case will indicate its size. The first 2 numbers represent the diameter of the case at its smallest point (where the handles are). Since the case is a polygon, there may be areas that are larger. The second 2 numbers in the model number represent the minimum length (in inches) of the tripod you'll want to put in the case. Since the lid is held in place with an adjustable strap, you can secure the lid with a tripod roughly 5 inches longer than the length indicated by the model number.

The foam in the lid is glued in place. The foam in the base (which is protected from the feet of your tripod by a circular plastic disk) is held in place by detents which have been molded into the base of each case.

The rotational molding process used to form every Tuffpak™ enables us to produce an extremely durable lightweight case that can withstand even the roughest baggage handlers for a lifetime. Just how tough are rotationally molded products? Well, some products you've probably seen include, gas cans, the big yellow crash barrels found on most of our nations freeways, water tanks, toys, dumpster lids and many other items where durability is mandatory.

Features:

For Tripods 43-48" w/ 150mm Ball Head
Molded Polyethylene Case
2.0" of Foam in Lid and Base
Molded Carry Handle
Built-in 2.0" Recessed Wheels

$419.95

TP-1461WH Tuffpak Tripod Case with Wheels

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

1510 Watertight Hard Case Carry On - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1510 Watertight Hard Case Carry On - Black is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4mm) neoprene o-ring, and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. It has a hinged case with double ABS latches that seal perfectly and padlock protectors that provide added strength and extra security against cutting and theft.

$149.95

1610 Case with Foam (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1610 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1610 comes with a side handle, front handle and an extension handle. It has an effortless release latch for the extension handle. The padlock protectors provide added strength and extra security against cutting and theft. A five piece foam insert set is included.

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Includes a 5 piece foam set that consists of one "egg crate" foam upper section, three Pick 'N Pluck foam sections and one 1" blank bottom foam section
Built-in purge valve for changes in altitude or temperature
Temperature Rating -10 degrees to Plus 210 degrees
Built in dolly with 2" (5 cm) hard rubber transport wheels
Side, top and retractable handles.
Padlock protectors provide added strength and extra security against cutting and theft.

$187.99

1620 Watertight Hard Case with Foam Inserts and Wheels

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1620 Large Protector Case with Black Dolly is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost).

The 1620 comes with a side handle, front handle and an extension handle. It has an effortless release latch for the extension handle. The padlock protectors provide added strength and extra security against cutting and theft.A six piece foam insert set is included.

The 1620 case is NATO-codified and tested to MIL C-4150J (Military Standard).

Key Features

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Includes a 6 piece foam set that consists of one "egg crate" foam upper section, four Pick 'N Pluck foam sections and one 1" blank bottom foam section
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard)
Temperature Rating -10 degrees to Plus 210 degrees
Built in dolly with 2" (5 cm) hard rubber transport wheels
Side, top and retractable handles
Padlock protectors provide added strength and extra security against cutting and theft.

$199.95

1650B Watertight Hard Case with Foam Inserts and Wheels - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1650 Large Protector Case is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, ABS latches that seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. A nameplate (included) can be personalized (engraved at additional cost). A four piece foam insert set is included.

The 1650 comes with a fold down main handle, large side trunk handles and a 7" extension handle. The case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association).

Key Features

Includes a 4 piece foam set that consists of one 'egg crate' foam upper section, two Pick 'N Pluck foam section and one 1" blank bottom foam section
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard)
Temperature Rating -10 degrees to Plus 210 degrees
2" (5 cm) hard super heavy duty quad wheels
Fold down main handle
Large side trunk handles
7" retractable handle
Padlock protectors provide added strength and extra security against cutting and theft.

$218.99

1614 Waterproof 1610 Case with Dividers (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican 1614 Waterproof 1610 Case with Dividers is an unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof hard case used to carry any kind of equipment. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25" (6.4 mm) neoprene o-ring, 4 easy-open double throw latches that seal perfectly. It has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by 3 comfortable rubber over-molded haul handles, a retractable handle and built-in wheels.

$239.95

RSV Wheeled Upright Camera - Computer Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Pelican PCS-247 RSV Wheeled Upright Camera/Computer Case is designed for the busy digital professional who requires a case that is reliable, strong, and versatile. It is made of water resistant 1680 denier ballistic nylon material with full grain leather trim. It has a main compartment with a removable dividable tray and a fully padded computer pocket. There is a front organizer pocket with AA battery organizer and gusseted PVC lined inside mesh pockets.

The PCS-247 is carried by a leather side grip handle, a leather top grip handle and a recessed, locking telescoping handle with inline ball bearing skate wheels. There are removable tripod straps with catch pocket for the tripod legs. A Nylon storm cover with Pelican logo in reflective paint is included.

Features

Water resistant 1680D ballistic nylon with full grain leather trim camera/computer case

Molded protective corners in high wear areas

$249.95

1660 Watertight Jumbo Hard Case with Foam Inserts and Wheels - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

$284.95

1650B Watertight Hard Case with Padded Dividers and Wheels - Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

$291.95

1620 Rolling Hard Case Padded Dividers, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Includes a 6 piece foam set that consists of one "egg crate" foam upper section, four Pick 'N Pluck foam sections and one 1" blank bottom foam section
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Built-in purge valve for changes in altitude or temperature
NATO codified and tested to MIL C-4150J (Military Standard)
Temperature Rating -10 degrees to Plus 210 degrees
Built in dolly with 2" (5 cm) hard rubber transport wheels
Side, top and retractable handles
Padlock protectors provide added strength and extra security against cutting and theft.

$327.50

Value Added Suitcase

Samy's Camera — Wed, 15 Aug 2012 07:00:00 GMT

The Phase One Value Added Suitcase is a weather and waterproof suitcase with inline wheels and a telescoping handle. The case is made from a high performance material, and it has press & pull latches and automatic pressure release valve. It will meet most carry-on regulations on international airplanes. The case measures: 551 x 358 x 226mm. It includes most of the valuable photographer's equipment.

Features:

Value added system content: Phase One 645 DF camera with IQ or P+ Series, digital back mounted and 8GB CF card installed, Schneider Kreuznach 80mm, f2.8 LS lens, Capture One Pro software CD, Firewire 800 cable, USB3 Cable (IQ-series only), CCD Cleaning kit and 100x100mm Lens cast calibration plate.
Getting stated box with: 645DF/ IQ or P+ Quick Guide, USB key with documentation, Gray Card and Warranty papers, AA type batteries for 645DF
2 Lens wrapping cloths with: CF-Cardreader and cable, Hähnel Twin Pro charger with international, power supply and car charger. 2 Digital Back Batteries and an extra , battery casette with batteries for 645 DF, Multiconnector sync cable for connection to technical camera and CF-card storage box
Accesory box with: HB Multimount lens adaptor, Digital back cover, 645DF Back and lens cover and Lens and LCD Microfiber cleaning cloth.

$1,600.00

3i Series Rolling Mil-Standard Waterproof Case 7 (Black) with Padded Dividers

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

SKB 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

$184.99

Military-Standard Waterproof Case 8 With Padded Dividers

Samy's Camera — Tue, 29 Jan 2013 08:00:00 GMT

The SKB Cases Military-Standard Waterproof Case 8 With Padded Dividers is a ultra high-strength polypropylene copolymer resin and sealed against dust and water. Its hard outer shell is impact-resistant and features a rubber cushion grip handle, built-in wheels, and a pull handle for easy transport. It is features with padded dividers to fit your gear. An automatic ambient pressure equalization valve self-adjusts based on your altitude. The case is resistant to UV, solvents, corrosion, and fungus, making it the best way to ensure maximum protection for your equipment at all times.

Features:

Waterproof and dust tight design
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
Ambient pressure equalization valve
Resistant to UV, solvents, corrosion, fungus
Resistant to impact damage

$229.99

3i Series Rolling Mil-Standard Waterproof Case 10 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3i Series Rolling Mil-Standard Waterproof Case 10 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

3I-2918-10BC Utility Case with Foam

Samy's Camera — Tue, 01 Nov 2011 07:00:00 GMT

The 3I-2918-10BC Pro Audio Utility Case measures 29" Long x 18" Wide x 10" Deep and is molded of ultra high-strength polypropylene copolymer resin. The case features a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) to assist with moisture control.

The 3I-2918-10B Utility Case also features three protected hinges with stainless steel pins to provide lid stability, SKBs "trigger release" latch system with optional built-in TSA recognized and accepted locks, an oversized double grip carrying handle to balance a heavy load, and comfortable snap-down rubber over-molded cushion grip handles on each end for a two person carry. An industrial strength injection molded pull handle and wide set double wheels offer the perfect solution to comfortable transport of pro audio equipment, cables, hardware, or drum accessories.

Features

Built-in pull handle and wide set double wheels
Ultra high-strength polypropylene copolymer resin
UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
Resistant to corrosion and impact damage
Continuous molded-in hinge
Patent pending "trigger release" TSA Locking Latch system
Rubber over-molded cushion grip handle
Oversized double grip carrying handle

$249.99

SpeedRoller 1x Big Wheels Rolling Digital Camera and Computer Case (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

For Photographers on the go, these rolling photo and laptop cases are designed to protect and carry heavy camera gear and a laptop across diverse terrain. Big Wheels SpeedRollers - These ballistic nylon outer shell and rigid, plastic-armored wall cases are extremely tough and protective. Windowpane Mesh pockets inside the lids organize accessories. Foam-padded outer pockets protect laptops. The oversized wheels offer excellent mobility and the ability to negotiate imperfect surfaces. The QuickClip Tripod Attachment System allows a tripod to be securely carried.

$374.95

SpeedRoller 2x Big Wheels Rolling Case (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The SpeedRoller 2x is spacious and will hold two DSLRs with lenses attached as well as 4-6 additional lenses. And since most photographers don't travel without a laptop these days, it will also hold your 17.3' (43.9cm) laptop in its own padded compartment. It's Windowpane-Mesh pockets, located inside the main lid, will hold small items such as extra batteries, memory cards, filters and the like. Take your tripod along using the QuickClip attachment system. It is secured, centered and balanced on the front of the SpeedRoller.

$399.95

694 Big-Wheels Rolling Strongbox Camera Case LP4, Black

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

For photographers who are not concerned with airline carry-on restrictions and need to carry more cameras, lenses and accessories than will fit in the Model 692, the Big Wheels Rolling StrongBox 694 is the answer. It puts the weight of a huge amount of camera equipment on wheels without sacrificing excellent protection. This case has two zippered front pockets, one of which is foam-padded for notebook computers up to 12.75 x 10.5 x 2", Modular Accessory System (M.A.S.) attachment slots and RollerProp compatibility. This case is also excellent when used in conjunction with one of Tamrac's camera bags equipped with a Piggy-Back Pocket.

Made the same as the normal StrongBox series of shipping cases, the Big Wheels Rolling StrongBoxes feature an industrial strength telescoping handle, reinforced rail guards and fantastic wide wheels which let you wander over rougher terrain. A seamless protective tub made of ABS plastic protects the insides from the outside. Use the well-padded dividers and Touch Fastener to customize the interior to match the equipment. Inside the top are Windowpane mesh pockets to hold filters and accessories in easy reach. Outside construction is of waterproof Dupont ballistic nylon. Zippers are self healing nylon coil and the main compartment can be secured with the included Tamrac lock. Sturdy leather-wrapped carrying handles provide easy transportation when you must carry your own load.

Features

Holds a huge amount of camera equipment on wheels
Foam-padded front pocket for notebook computers up to 12.75 x 10.5 x 2"
Telescoping handle, reinforced rail guards and fantastic wide wheels
ABS plastic and waterproof Dupont ballistic nylon

$522.95

38" Rolling Tripod/Grip Case with Wheels (Black)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Tenba 38 Rolling Tripod/Grip Case (Black) is a hand-built case designed to carry tripods light stands umbrellas collapsible light modifiers reflectors & other accessories up to 38 in length. It is made from weather-repellent 1050 denier ballistic nylon with air-channel ABS walls thickly padded bottom board to protect the contents and an interior that is lined with smooth nylon. It is transported by heavy-duty reinforced web handles or industrial grade ball bearing wheel assemblies.
Features:

Exterior of weather-repellent 1050 denier ballistic nylon - the ultimate fabric for professional shipping cases.

Heavy-duty, reinforced web handles for serious professional use.

Industrial grade, ball bearing wheel assemblies make moving heavy loads easier than ever.

Triple tie-down straps keep load from shifting and contents from banging.

Large, full-access opening makes it easy to load and unload gear.

Interior lined with smooth nylon and thickly padded bottom board to protect content.

$300.00

Roadie II: Universal Hybrid Roller/Backpack (Black)

Samy's Camera — Thu, 16 Feb 2012 08:00:00 GMT

The black Roadie II: Universal Hybrid Roller/Backpack from Tenba is a serious pack for serious shooters. Whether you are still photographer or videographer, you'll find this pack has something for any discipline. It holds a ton of gear including 1-2 DSLRs, 6-8 lenses including a 400mm f/2.8 or 500mm f/4 plus a host of accessories, flash and media cards that can be stored in its separate 4-pocket wallet.

This is a weatherproof ballistic nylon pack made for DSLR, HD video or medium format photography. It also holds your 17" (43.2 cm) laptop in its own padded sleeve that is top loading for rapid retrieval at airports. If you don't use the sleeve for your laptop, the sleeve can be used for support gear like hard drives or documents. The pack is carried in any of several ways. First, it has dual ball bearing wheels that are complimented by a 4-section retractable handle - great for parking lots, stairs and airports. For added convenience, there are reinforced top and side carry handles that will support the bag even when you've got a full load packed inside. The handles are excellent when you just need to grab the bag from your car or closet. However, it doesn't stop there since the Roadie II has a rear hidden backpack harness that can be readily deployed and leave you hands-free while walking through airports or city streets.

Inside, it's got an EVA (ethyl vinyl acetate) molded interior and padded movable dividers that permit you to sculpt the "guts" of the bag to accommodate your gear. The soft tricot lining is gear-friendly and won't damage the surface of your gear. Your medium to long range lenses or HD video rig can be packed with hoods on the lenses and tripod collar in place. Store your lenses standing up in shooting position and be ready to work when you unpack to get started shooting.

With all this gear, of course you'll need a tripod and the Roadie II features a quick-connect carry system that will attach just about any size tripod or light stand to the pack. Your quick-release tripod collar can be stashed within the rear pocket of the pack when not required. There is also a fair amount of internal storage space for accessories in laminated mesh pockets that are perfect for your cables, filters, repair kits and other small items.

Accessing the bag is easy using the heavy-duty YKK zippers. On the outside, there is front pocket to hold quick-access items such as tickets, passports and keys. For the shooter who needs a more than durable pack to get from A-B in comfort, style and safety, the Roadie II supplies the tools to get the job done. Backed by Tenba's 5-year warranty, this pack, that holds a ton of gear at only 10.5 lb (4.8 kg) appears to be a complete package that meets the requirements of even the most demanding photographer.

Heavy-duty, four-section handle extends to full, comfortable walking height, easing the strain on your back and shoulders when wheeling through long airport stretches

Weatherproof ballistic nylon exterior; YKK zippers and heavy-duty tricot interior

Padded, custom-sewn, reinforced handles enable comfortable carrying even when the case is fully loaded

Heavy-duty, ball bearing wheel assemblies feature smooth-rolling, user-replaceable wheels

Padded computer sleeve fits most laptops up to 17" (43.2 cm), and top access speeds you through airport security. If the sleeve is not being used for a laptop, small pockets inside provide space for hard drives, pens and other accessories in addition to documents

Quick-connect tripod carrying system will hold virtually any size tripod or light stand tight to the case for travel. Quick-release tripod collar stows away in the rear pocket when not in use

Exterior front pocket holds media wallet, airline tickets, passport and other items you need get at quickly

EVA (ethyl vinyl acetate) molded interior maximizes depth and ensures that large DSLRs and mid-range zoom lenses can be stored standing up; super telephoto lenses will fit with their hood and tripod collar in place; production-quality HD video cameras will fit as well

Photo section features fully adjustable/removable, padded dividers, and can be configured to accommodate a long lens up to 400mm f/2.8 or 500mm 4.0

Large, laminated mesh interior storage pockets for cables, filters, tools and other accessories

The rear of the bag has a fast-deploying, padded backpack harness which allows the Roadie to be carried comfortably when the terrain isn't so "wheel-friendly," such as over sand or up stairs

Included 4-pocket media wallet fits either CF or SD cards

Carry-On Form Factor: FAA and airline carry-on specifications are subject to change without notice, please check with your airline before designating this case as a carry-on item. Most airlines require carry-on items to have an external linear measurement that is equal to or less than 45.0" (114.3 cm). The external dimensions of this case add up to 42.5"(108 cm)

$324.95

Airport International Rolling Camera Case

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The ThinkTank Airport International rolling camera case is thoughtfully designed for the international traveler to take the maximum amount of gear possible as legal carry-on baggage. The smooth-rolling wheels get you quickly through the airport, while a security cable and lock insure that your gear will stay with you. Interior and front-pocket organizers make this case business friendly, as well.

Features:

International carry-on size
Security combination lock
Security cable
Holds 300 f/2.8 and other large lenses
Inside organizer
Replaceable wheels
Front stretch pocket
Business card holder/top pocket
Bottom handle
Front pocket organizer

Compatible with the optional AI Low Divider Set and the Artificial Intelligence 15” and 17” laptop cases.

Includes seam-sealed rain cover.

$369.75

Logistics Manager 30 Inch High Volume Rolling Camera Case

Samy's Camera — Wed, 17 Apr 2013 07:00:00 GMT

Often referred to as a "rolling studio," the Think Tank Photo Logistics Manager 30 Inch High Volume Rolling Camera Case allows you to haul a large amount of photography equipment to your destination or simply to stay organized. It can be used to carry small to medium size softboxes (collapsed), umbrellas, light stands, strobe heads/packs, super telephoto lenses, multiple cameras, and other diverse gear kits.

Features:

Stores and transports all types of gear on location
TSA combination lock secures main zipper
Rear security cable & lock tethers case to a fixed object
Front security cable & lock
Attachments for large tripods or light stands on both sides
Large front organizer pocket
Stretchable front pocket for odd sized items or laptop
Side organizer pocket for small tools
Interior clear pockets for cables and accessories
Lid straps keep bag opening at 90º angle
Two clear organizer bags included
Seam sealed rain cover included
Holds up to medium size softboxes or light stands inside (verify sizing)
Large light stands or tripods can be attached to both sides of the bag
Holds multiple super telephoto lenses inside, up to 600mm f4

$499.75

3i Series Rolling Mil-Standard Waterproof Case 14 (Black) with Cubed Foam

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

Roadie II Rolling Photo/Laptop Case (Large)

Samy's Camera — Sat, 01 Jan 2011 08:00:00 GMT

The Roadie II Large Photo/Laptop Case holds a professional DSLR, HD video or medium format camera system, as well as a laptop (up to 17 inches), plus tons of accessories. The Large Roadie meets U.S. domestic airline carry-on standards, as well as the standards for many international flights.
FEATURES:

Heavy-duty, four-section handle extends to full, comfortable walking height, easing the strain on your back and shoulders when wheeling through long airport stretches.

Built with the finest materials available: Weatherproof ballistic nylon exterior, YKK

$335.95