INFO/CONTACT US: ONLINE SUPPORT STORE LOCATIONS RENTAL LOCATIONS
FILTER BY
PRICE
Home  > STUDIO & LIGHTING  > Light Stands & Grip Equipment  >

Clamps

[X] Brand: Matthews
Found: 0 Sort: # Per Page:
Part #: 350606
MICROClip with 3/8

Like a mini duckbill clamp or foam core holder, use this MICROClip to hold your foam core or anything else you need to design and maintain the lighting of your shoot.
Availability: In Stock
 
PRICE: $12.99
Add To Wishlist
Quantity
Part #: 429678
5/8 Drop Ceiling Scissor Clamp

Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and o...
Availability: In Stock
 
PRICE: $14.99
Add To Wishlist
Quantity
Part #: 350617
MicroClamp

The Matthews MicroClamp could easily have been called a Mini-Mafer clamp. Part of the reduced sized MicroGrip system, the MicroClamp accepts 1/4" and 3/8" accessories. It has a 10 lb load capacity and can clamp onto flat or round surfaces up to 1.75".

FEATURES:...
Availability: In Stock
 
PRICE: $22.99
Add To Wishlist
Quantity
Part #: B429500
Afflac Clamp (Black)

This clamp is shaped like a duck's bill, and is fitted with a stud to mount a small light head, or other grip items. Use it to hold reflector cards or gobos in place.
Availability: In Stock
 
PRICE: $24.99
Add To Wishlist
Quantity
Part #: 540004
Super Mafer

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
 
PRICE: $25.99
Add To Wishlist
Quantity
Part #: B540004
Super Mafer Clamp (Black)

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
 
PRICE: $25.99
Add To Wishlist
Quantity
Part #: B541004
Matthews | Super Mafer Clamp with 5/8 in. Pin - Black | B541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of i...
Availability: In Stock
 
PRICE: $29.99
Add To Wishlist
Quantity
Part #: 541004
Matthews | Super Mafer and Pin | 541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes ...
Availability: In Stock
 
PRICE: $29.99
Add To Wishlist
Quantity
Part #: 429618
Baby Pipe Clamp

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin atta...
Availability: In Stock
 
PRICE: $32.95
Add To Wishlist
Quantity
Part #: 429038
Matthews | Vise Grip Plier with Two 5/8 In. Pins | 429038

The Matthews Vise Grip Plier with Two 5/8 In. Pins provides maximum gripping power on any size pipe up to 6 inches in diameter. The Locking Plier also provides maximum gripping power on both flat and round surfaces with smaller diameters. Caution must be taken when the 5/8 ...
Availability: In Stock
 
PRICE: $39.99
Add To Wishlist
Quantity
Part #: 420112S15
Mini Matthellini Clamp

The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps ar...
Availability: On Backorder
 
PRICE: $42.99
Add To Wishlist
Quantity
Part #: 540011
Double Super Mafer Clamp

The Double Super Mafer allows the use of two Mafer attachments with one clamp. The castings and the reformulated protective pads in the jaws are now strong enough for us to be able to make this Double Super Mafer Clamp. Use a Hollywood Superflex Arm at one end and a 5/8" Baby Pin with a lig...
Availability: In Stock
 
PRICE: $44.99
Add To Wishlist
Quantity
Part #: 429594
Matthews | C Clamp with 2- 5/8 Baby Pins 4 In. | 429594

The Matthews C Clamp with 2- 5/8 Baby Pins 4 In. has 2 separate 5/8 inches diameter pins at different angles to give the light fixtures may fit with minimal clearance. The clamp jaw offers a maximum 4 inches opening to hold the fixture.
Availability: In Stock
 
PRICE: $46.99
Add To Wishlist
Quantity
Part #: 429619
Junior Pipe Clamp

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin atta...
Availability: On Backorder
 
PRICE: $53.50
Add To Wishlist
Quantity
Part #: 429598
Matthews | C - Clamp with 2 Baby Pins - 8 In. | 429598

The Matthews C - Clamp with 2 Baby Pins - 8 In. in 4 In., 6 In., 8 In., 10 In. and 12 In. with or without 5/8 In. mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Bab...
Availability: On Backorder
 
PRICE: $54.95
Add To Wishlist
Quantity
Part #: 429620
Big Ben Clamp

A cheeseboro clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4" to 3-1/4" as a temporary overhead grid.
Availability: On Backorder
 
PRICE: $54.99
Add To Wishlist
Quantity
Part #: 417026
Matthews | 4.5 In. Vacuum Cup with 5/8 In. Pin | 417026

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common...
Availability: In Stock
 
PRICE: $54.99
Add To Wishlist
Quantity
Part #: 420101
Matthews | Matthellini Clamp, 3

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2” o...
Availability: In Stock
 
PRICE: $59.99
Add To Wishlist
Quantity
Part #: 420110
Matthews | Matthellini Clamp, 2

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" C...
Availability: On Backorder
 
PRICE: $59.99
Add To Wishlist
Quantity
Part #: 420100
Matthellini Clamp, 2

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" C...
Availability: In Stock
 
PRICE: $59.99
Add To Wishlist
Quantity
Part #: 420210
Matthellini Clamp - 6

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A ergonomic handle design, reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or...
Availability: In Stock
 
PRICE: $62.99
Add To Wishlist
Quantity
Part #: 429039
Matthews | Chain Vice Grip with Two 5/8 In. Pins | 429039

The Matthews Chain Vice Grip with Two 5/8 In. Pins provides maximum gripping power on any size pipe up to 6 In. diameter.
Availability: In Stock
 
PRICE: $74.99
Add To Wishlist
Quantity
Part #: 429042
Quaker Clamp

Of Amish design... Also known as the Quacker Clamp or Duck Bill. This clamp is ideal for positioning foam core or bead board.
Availability: In Stock
 
PRICE: $84.99
Add To Wishlist
Quantity
Found: 0 Sort: # Per Page:
Samys EDU
Rentals
Create A Photo Book
Apple Service and Repair
Used & Collectables
Photo Newsletter
Corporate Sales
Service Bureau
Sign Up To Win!
Call us toll free at 1-800-321-4726 for customer service & ordering.
Copyright © 2014 Samy's Camera. All Rights Reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors.
Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.