Mics - Windscreens

Part #: WS58

This BeyerDynamic product is the wind screen for the M 58 microphone, charcoal-gray.

Part #: BBIL02

The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. Yes, nothing. And this nothing is exactly what makes the bubble tick. The air enters the bubble for a short visit, finds it rather dull, a...

Part #: BBIL03

The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. Yes, nothing. And this nothing is exactly what makes the bubble tick. The air enters the bubble for a short visit, finds it rather dull, a...

Part #: BBIL04

The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. Yes, nothing. And this nothing is exactly what makes the bubble tick. The air enters the bubble for a short visit, finds it rather dull, a...

Part #: BBIL01

The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. Yes, nothing. And this nothing is exactly what makes the bubble tick. The air enters the bubble for a short visit, finds it rather dull, a...

Part #: KTDR100

The K-Tek Topper is a custom-tailored windscreen designed to reduce the effects of wind noise on the Tascam DR-100 audio recorder.

Part #: BK1B

Purpose designed to fit with mini mics/lapel mics including the Sanken Cos 11 and Tram to name but a few. As with all windsocks an area of air needs to be created so it's recommended they are used in conjunction with your factory style foam windsock or in the case of the Sanken or similar...

Part #: BK1G

Purpose designed to fit with mini mics/lapel mics including the Sanken Cos 11 and Tram to name but a few. As with all windsocks an area of air needs to be created so it's recommended they are used in conjunction with your factory style foam windsock or in the case of the Sanken or similar...

Part #: BK1W

Purpose designed to fit with mini mics/lapel mics including the Sanken Cos 11 and Tram to name but a few. As with all windsocks an area of air needs to be created so it's recommended they are used in conjunction with your factory style foam windsock or in the case of the Sanken or similar...

Part #: WSHS1B

The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-B is supplied as a pack of th...

Part #: WSHS1P

The WS-HS1-P is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule. The WS-HS1-P is supplied as a pack of th...

Part #: WSVM

The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives.

COMPATIBLE MICROPHONES:

• NTG-1
• NTG-2
• NTG-3
• VideoMic

Part #: WSLAV

The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent.

Part #: WS2

Rode WS2 Windscreen is built to fit NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster Microphones. Properly equip your microphone with the WS2 to avoid wind noise and pop.

Part #: WS4

Rode WS4 Windscreen in grey is built to fit the NT4 microphone. Properly equip your microphone with the WS4 to avoid wind noise and pop. If you have a Rode NT4 microphone then this is the windscreen you need. It even comes in grey so it perfectly ...

Part #: WS3

The Rode WS3 Windscreen provides additional protection for the microphone capsule against any wind noise or plosives.

Compatibility: If you have a Rode NT3 microphone then this is the windscreen you need. It even comes in grey so it perfectly matches your mic...

Part #: WS5

Rode WS5 Windscreen is built to fit the NT5 microphone. Properly equip your microphone with the WS5 to avoid wind noise and pop. The WS5 Windscreen is designed to fit If you have a Rode NT5  microphone then this is the windsc...

Part #: DEADKITTEN

The Dead Kitten Windshield is designed for minimising any wind noise when using a microphone in high wind conditions.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Part #: MINIFURLAV

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.

Part #: DEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microph...

Part #: DEADCATVMP

The Dead Cat Wind Muff is an artificial fur wind cover for the VideoMic. The windshield is designed for minimizing any wind noise when recording in high wind conditions. The Dead Cat protects against wind noise while remaining acoustically transparent and accurate.

Part #: DEADWOMBAT

This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.

Part #: WS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter ...

Part #: WS7

The Rode WS7 Deluxe Wind Screen provides excellent noise protection against high wind and adverse weather conditions.

The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones; as well as any shotgun or stereo mi...